This is cmdref3.txt in view mode; [Download] [Up]
Helpsheet: Back Page (Left two columns)
'Group level': tagging an article 'Group level': miscellaneous
Tagging two or more articles The following table shows the
allows you to apply the mail, keystrokes and the commands not
print, save, crosspost, and covered previously. You may use
piping operations against them. them at this level only:
1. Move the selection bar to the ^K Kill / Auto select (hot)
desired article. current article
2. Press the <t> key. <TAB> Goto next unread article or
group
'Group level': mailing article(s) a Author forward search
B Article body search
1. Move the selection bar to the c Mark all articles as read
desired article. and go to group selection
1. Press the <m> key. menu
2. Look for a prompt. d Toggle display of subject
3. Press the <a> key or make a or subject & author
capital T. H Toggle off/on the mini help
Note: The 'a' means the menu
current article and 'T' l List articles within
means the tagged current thread
articles . M Menu of configurable
4. Look for a prompt. options
5. Enter the e-mail address. n Go to next group
6. Look for a prompt. p Go to previous group
7. Press the <s> key. N Go to next unread article
P Go to previous unread
'Group level': printing articles article
You may print the article that q Return to previous level
you are currently reading. Q Quit
r Toggle display to show all
1. Press the <o> key. / only unread articles
2. Look for a prompt. t Tag current article for
3. Press the <a> key or make a crossposting/mailing/piping
capital T. /printing/saving
Note: Where the article is u Toggle display of
printed depends on what unthreaded & threaded
printer is set under articles
O)ptions. U Untag all tagged articles
x Crosspost current article
'Group level': reading to another group
Once you have decided on an z Mark article as unread
article to read, you must select Z Mark thread as unread
it. - Show last message
| Pipe
Proc. 1 (Use the <RETURN> key): article/thread/hot/pattern/
1. Move the selection bar to the tagged articles into
desired article. command
2. Press the <RETURN> key. * Select thread
3. Look for the 'Article level' . Toggle selection of thread
screen. @ Reverse all selections (all
articles)
Proc. 2 (Use the right . key): ~ Undo all selections (all
1. Move the selection bar to the articles)
desired article. X Mark all unread articles
2. Press the . key. that have not been selected
3. Look for the 'Article level' as read
screen. + Perform auto-selection on
group
Proc. 3 (Enter the numeric = Mark threads selected if at
identifier): least one unread art is
1. Type the article's numeric selected
identifier. ; Mark threads selected if at
2. Press the <RETURN> key. least one unread art is
3. Look for the 'Article level' selected
screen.
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.