This is leavembox.c in view mode; [Download] [Up]
static char rcsid[] = "@(#)$Id: leavembox.c,v 5.7 1992/12/11 01:45:04 syd Exp $";
/*******************************************************************************
* The Elm Mail System - $Revision: 5.7 $ $State: Exp $
*
* Copyright (c) 1988-1992 USENET Community Trust
* Copyright (c) 1986,1987 Dave Taylor
*******************************************************************************
* Bug reports, patches, comments, suggestions should be sent to:
*
* Syd Weinstein, Elm Coordinator
* elm@DSI.COM dsinc!elm
*
*******************************************************************************
* $Log: leavembox.c,v $
* Revision 5.7 1992/12/11 01:45:04 syd
* remove sys/types.h include, it is now included by defs.h
* and this routine includes defs.h or indirectly includes defs.h
* From: Syd
*
* Revision 5.6 1992/12/07 03:49:49 syd
* use BSD or not apollo on file.h include as its not valid
* for Apollos under sys5.3 compile type
* From: gordonb@mcil.comm.mot.com (Gordon Berkley)
*
* Revision 5.5 1992/11/26 01:46:26 syd
* add Decode option to copy_message, convert copy_message to
* use bit or for options.
* From: Syd and bjoerns@stud.cs.uit.no (Bjoern Stabell)
*
* Revision 5.4 1992/11/26 00:46:13 syd
* changes to first change screen back (Raw off) and then issue final
* error message.
* From: Syd
*
* Revision 5.3 1992/10/27 01:52:16 syd
* Always include <sys/ioctl.h> in curses.c When calling ioctl()
*
* Remove declaration of getegid() from leavembox.c & lock.c
* They aren't even used there.
* From: tom@osf.org
*
* Revision 5.2 1992/10/17 22:18:36 syd
* Correct reversed usage of $d_utimbuf.
* From: chip@tct.com (Chip Salzenberg)
*
* Revision 5.1 1992/10/03 22:58:40 syd
* Initial checkin as of 2.4 Release at PL0
*
*
******************************************************************************/
/** leave current folder, updating etc. as needed...
**/
#include "headers.h"
#include "s_elm.h"
#include <sys/stat.h>
#ifdef USE_FLOCK_LOCKING
#define SYSCALL_LOCKING
#endif
#ifdef USE_FCNTL_LOCKING
#define SYSCALL_LOCKING
#endif
#ifdef SYSCALL_LOCKING
# if (defined(BSD) || !defined(apollo))
# include <sys/file.h>
# endif
#endif
#include <errno.h>
#ifdef I_TIME
# include <time.h>
#endif
#ifdef I_SYSTIME
# include <sys/time.h>
#endif
#ifdef I_UTIME
# include <utime.h>
#endif
#ifdef I_SYSUTIME
# include <sys/utime.h>
#endif
/**********
Since a number of machines don't seem to bother to define the utimbuf
structure for some *very* obscure reason....
Suprise, though, BSD has a different utime() entirely...*sigh*
**********/
#ifndef BSD
# ifndef UTIMBUF
struct utimbuf {
time_t actime; /** access time **/
time_t modtime; /** modification time **/
};
# endif /* UTIMBUF */
#endif /* BSD */
extern int errno;
char *error_description(), *strcpy(), *rindex();
#ifndef _POSIX_SOURCE
unsigned long sleep();
#endif
int
leave_mbox(resyncing, quitting, prompt)
int resyncing, quitting, prompt;
{
/** Close folder, deleting some messages, storing others in mbox,
and keeping others, as directed by user input and elmrc options.
Return 1 Folder altered
0 Folder not altered
-1 New mail arrived during the process and
closing was aborted.
If "resyncing" we are just writing out folder to reopen it. We
therefore only consider deletes and keeps, not stores to mbox.
Also we don't remove NEW status so that it can be preserved
across the resync.
If "quitting" and "prompt" is false, then no prompting is done.
Otherwise prompting is dependent upon the variable
question_me, as set by an elmrc option. This behavior makes
the 'q' command prompt just like 'c' and '$', while
retaining the 'Q' command for a quick exit that never
prompts.
**/
FILE *temp;
char temp_keep_file[SLEN], buffer[SLEN];
struct stat buf; /* stat command */
#ifdef BSD
time_t utime_buffer[2]; /* utime command */
#else
struct utimbuf utime_buffer; /* utime command */
#endif
register int to_delete = 0, to_store = 0, to_keep = 0, i,
marked_deleted, marked_read, marked_unread,
last_sortby, ask_questions, asked_storage_q,
num_chgd_status, need_to_copy, is_symlink = FALSE;
char answer;
int err;
long bytes();
dprint(1, (debugfile, "\n\n-- leaving folder --\n\n"));
if (message_count == 0)
return(0); /* nothing changed */
ask_questions = ((quitting && !prompt) ? FALSE : question_me);
/* YES or NO on softkeys */
if (hp_softkeys && ask_questions) {
define_softkeys(YESNO);
softkeys_on();
}
/* Clear the exit dispositions of all messages, just in case
* they were left set by a previous call to this function
* that was interrupted by the receipt of new mail.
*/
for(i = 0; i < message_count; i++)
headers[i]->exit_disposition = UNSET;
/* Determine if deleted messages are really to be deleted */
/* we need to know if there are none, or one, or more to delete */
for (marked_deleted=0, i=0; i<message_count && marked_deleted<2; i++)
if (ison(headers[i]->status, DELETED))
marked_deleted++;
if(marked_deleted) {
answer = (always_del ? *def_ans_yes : *def_ans_no); /* default answer */
if(ask_questions) {
if (marked_deleted == 1)
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveDeleteMessage,
"Delete message? (%c/%c) "), *def_ans_yes, *def_ans_no);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveDeleteMessages,
"Delete messages? (%c/%c) "), *def_ans_yes, *def_ans_no);
answer = want_to(buffer, answer);
}
if(answer == *def_ans_yes) {
for (i = 0; i < message_count; i++) {
if (ison(headers[i]->status, DELETED)) {
headers[i]->exit_disposition = DELETE;
to_delete++;
}
}
}
}
dprint(3, (debugfile, "Messages to delete: %d\n", to_delete));
/* If this is a non spool file, or if we are merely resyncing,
* all messages with an unset disposition (i.e. not slated for
* deletion) are to be kept.
* Otherwise, we need to determine if read and unread messages
* are to be stored or kept.
*/
if(folder_type == NON_SPOOL || resyncing) {
to_store = 0;
for (i = 0; i < message_count; i++) {
if(headers[i]->exit_disposition == UNSET) {
headers[i]->exit_disposition = KEEP;
to_keep++;
}
}
} else {
/* Let's first see if user wants to store read messages
* that aren't slated for deletion */
asked_storage_q = FALSE;
/* we need to know if there are none, or one, or more marked read */
for (marked_read=0, i=0; i < message_count && marked_read < 2; i++) {
if((isoff(headers[i]->status, UNREAD))
&& (headers[i]->exit_disposition == UNSET))
marked_read++;
}
if(marked_read) {
answer = (always_store ? *def_ans_yes : *def_ans_no); /* default answer */
if(ask_questions) {
if (marked_read == 1)
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveMoveMessage,
"Move read message to \"received\" folder? (%c/%c) "),
*def_ans_yes, *def_ans_no);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveMoveMessages,
"Move read messages to \"received\" folder? (%c/%c) "),
*def_ans_yes, *def_ans_no);
answer = want_to(buffer, answer);
asked_storage_q = TRUE;
}
for (i = 0; i < message_count; i++) {
if((isoff(headers[i]->status, UNREAD))
&& (headers[i]->exit_disposition == UNSET)) {
if(answer == *def_ans_yes) {
headers[i]->exit_disposition = STORE;
to_store++;
} else {
headers[i]->exit_disposition = KEEP;
to_keep++;
}
}
}
}
/* If we asked the user if read messages should be stored,
* and if the user wanted them kept instead, then certainly the
* user would want the unread messages kept as well.
*/
if(asked_storage_q && answer == *def_ans_no) {
for (i = 0; i < message_count; i++) {
if((ison(headers[i]->status, UNREAD))
&& (headers[i]->exit_disposition == UNSET)) {
headers[i]->exit_disposition = KEEP;
to_keep++;
}
}
} else {
/* Determine if unread messages are to be kept */
/* we need to know if there are none, or one, or more unread */
for (marked_unread=0, i=0; i<message_count && marked_unread<2; i++)
if((ison(headers[i]->status, UNREAD))
&& (headers[i]->exit_disposition == UNSET))
marked_unread++;
if(marked_unread) {
answer = (always_keep ? *def_ans_yes : *def_ans_no); /* default answer */
if(ask_questions) {
if (marked_unread == 1)
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepMessage,
"Keep unread message in incoming mailbox? (%c/%c) "),
*def_ans_yes, *def_ans_no);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepMessages,
"Keep unread messages in incoming mailbox? (%c/%c) "),
*def_ans_yes, *def_ans_no);
answer = want_to(buffer, answer);
}
for (i = 0; i < message_count; i++) {
if((ison(headers[i]->status, UNREAD))
&& (headers[i]->exit_disposition == UNSET)) {
if(answer == *def_ans_no) {
headers[i]->exit_disposition = STORE;
to_store++;
} else {
headers[i]->exit_disposition = KEEP;
to_keep++;
}
}
}
}
}
}
dprint(3, (debugfile, "Messages to store: %d\n", to_store));
dprint(3, (debugfile, "Messages to keep: %d\n", to_keep));
if(to_delete + to_store + to_keep != message_count) {
MoveCursor(LINES, 0);
Raw(OFF);
dprint(1, (debugfile,
"Error: %d to delete + %d to store + %d to keep != %d message cnt\n",
to_delete, to_store, to_keep, message_count));
printf(catgets(elm_msg_cat, ElmSet, ElmSomethingWrongInCounts,
"Something wrong in message counts! Folder unchanged.\n"));
emergency_exit();
}
/* If we are not resyncing, we are leaving the mailfile and
* the new messages are new no longer. Note that this changes
* their status.
*/
if(!resyncing) {
for (i = 0; i < message_count; i++) {
if (ison(headers[i]->status, NEW)) {
clearit(headers[i]->status, NEW);
headers[i]->status_chgd = TRUE;
}
}
}
/* If all messages are to be kept and none have changed status
* we don't need to do anything because the current folder won't
* be changed by our writing it out - unless we are resyncing, in
* which case we force the writing out of the mailfile.
*/
for (num_chgd_status = 0, i = 0; i < message_count; i++)
if(headers[i]->status_chgd == TRUE)
num_chgd_status++;
if(!to_delete && !to_store && !num_chgd_status && !resyncing) {
dprint(3, (debugfile, "Folder keep as is!\n"));
error(catgets(elm_msg_cat, ElmSet, ElmFolderUnchanged,
"Folder unchanged."));
return(0);
}
/** we have to check to see what the sorting order was...so that
the order in which we write messages is the same as the order
of the messages originally.
We only need to do this if there are any messages to be
written out (either to keep or to store). **/
if ((to_keep || to_store ) && sortby != MAILBOX_ORDER) {
last_sortby = sortby;
sortby = MAILBOX_ORDER;
sort_mailbox(message_count, FALSE);
sortby = last_sortby;
}
/* Formulate message as to number of keeps, stores, and deletes.
* This is only complex so that the message is good English.
*/
if (to_keep > 0) {
if (to_store > 0) {
if (to_delete > 0) {
if (to_keep == 1)
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepStoreDelete,
"[Keeping 1 message, storing %d, and deleting %d.]"),
to_store, to_delete);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepStoreDeletePlural,
"[Keeping %d messages, storing %d, and deleting %d.]"),
to_keep, to_store, to_delete);
} else {
if (to_keep == 1)
sprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepStore,
"[Keeping 1 message and storing %d.]"),
to_store);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepStorePlural,
"[Keeping %d messages and storing %d.]"),
to_keep, to_store);
}
} else {
if (to_delete > 0) {
if (to_keep == 1)
sprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepDelete,
"[Keeping 1 message and deleting %d.]"),
to_delete);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepDeletePlural,
"[Keeping %d messages and deleting %d.]"),
to_keep, to_delete);
} else {
if (to_keep == 1)
strcpy(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeep,
"[Keeping message.]"));
else
strcpy(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveKeepPlural,
"[Keeping all messages.]"));
}
}
} else if (to_store > 0) {
if (to_delete > 0) {
if (to_store == 1)
sprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveStoreDelete,
"[Storing 1 message and deleting %d.]"),
to_delete);
else
MCsprintf(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveStoreDeletePlural,
"[Storing %d messages and deleting %d.]"),
to_store, to_delete);
} else {
if (to_store == 1)
strcpy(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveStore,
"[Storing message.]"));
else
strcpy(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveStorePlural,
"[Storing all messages.]"));
}
} else {
if (to_delete > 0)
strcpy(buffer, catgets(elm_msg_cat, ElmSet, ElmLeaveDelete,
"[Deleting all messages.]"));
else
buffer[0] = '\0';
}
/* NOTE: don't use variable "buffer" till message is output later */
/** next, let's lock the file up and make one last size check **/
if (folder_type == SPOOL)
lock(OUTGOING);
if (mailfile_size != bytes(cur_folder)) {
unlock();
error(catgets(elm_msg_cat, ElmSet, ElmLeaveNewMailArrived,
"New mail has just arrived. Resynchronizing..."));
return(-1);
}
/* Everything's GO - so ouput that user message and go to it. */
block_signals();
dprint(2, (debugfile, "Action: %s\n", buffer));
error(buffer);
/* Store messages slated for storage in received mail folder */
if (to_store > 0) {
if ((err = can_open(recvd_mail, "a"))) {
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveAppendDenied,
"Permission to append to %s denied! Leaving folder intact.\n"),
recvd_mail);
dprint(1, (debugfile,
"Error: Permission to append to folder %s denied!! (%s)\n",
recvd_mail, "leavembox"));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
unlock();
unblock_signals();
return(0);
}
if ((temp = fopen(recvd_mail,"a")) == NULL) {
err = errno;
unlock();
MoveCursor(LINES, 0);
Raw(OFF);
dprint(1, (debugfile, "Error: could not append to file %s\n",
recvd_mail));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
printf(catgets(elm_msg_cat, ElmSet, ElmLeaveCouldNotAppend,
"Could not append to folder %s!\n"), recvd_mail);
emergency_exit();
}
dprint(2, (debugfile, "Storing message%s ", plural(to_store)));
for (i = 0; i < message_count; i++) {
if(headers[i]->exit_disposition == STORE) {
current = i+1;
dprint(2, (debugfile, "#%d, ", current));
copy_message("", temp, CM_UPDATE_STATUS);
}
}
fclose(temp);
dprint(2, (debugfile, "\n\n"));
chown(recvd_mail, userid, groupid);
}
/* If there are any messages to keep, first copy them to a
* temp file, then remove original and copy whole temp file over.
*/
if (to_keep > 0) {
sprintf(temp_keep_file, "%s%s%d", temp_dir, temp_file, getpid());
if ((err = can_open(temp_keep_file, "w"))) {
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveTempFileDenied,
"Permission to create temp file %s for writing denied! Leaving folder intact."),
temp_keep_file);
dprint(1, (debugfile,
"Error: Permission to create temp file %s denied!! (%s)\n",
temp_keep_file, "leavembox"));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
unlock();
unblock_signals();
return(0);
}
if ((temp = fopen(temp_keep_file,"w")) == NULL) {
err = errno;
unlock();
MoveCursor(LINES, 0);
Raw(OFF);
dprint(1, (debugfile, "Error: could not create file %s\n",
temp_keep_file));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
printf(catgets(elm_msg_cat, ElmSet, ElmLeaveCouldNotCreate,
"Could not create temp file %s!\n"), temp_keep_file);
emergency_exit();
}
dprint(2, (debugfile, "Copying to temp file message%s to be kept ",
plural(to_keep)));
for (i = 0; i < message_count; i++) {
if(headers[i]->exit_disposition == KEEP) {
current = i+1;
dprint(2, (debugfile, "#%d, ", current));
copy_message("", temp, CM_UPDATE_STATUS);
}
}
if ( fclose(temp) == EOF ) {
MoveCursor(LINES, 0);
Raw(OFF);
printf(catgets(elm_msg_cat, ElmSet, ElmLeaveCloseFailedTemp,
"\nClose failed on temp keep file in leavembox\n"));
perror(temp_keep_file);
dprint(2, (debugfile, "\n\rfclose err on temp_keep_file - leavembox\n\r"));
rm_temps_exit();
}
dprint(2, (debugfile, "\n\n"));
} else if (folder_type == NON_SPOOL && !keep_empty_files && !resyncing) {
/* i.e. if no messages were to be kept and this is not a spool
* folder and we aren't keeping empty non-spool folders,
* simply remove the old original folder and that's it!
*/
(void)unlink(cur_folder);
unblock_signals();
return(1);
}
/* Otherwise we have some work left to do! */
/* Get original permissions and access time of the original
* mail folder before we remove it.
*/
if(save_file_stats(cur_folder) != 0) {
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveProblemsSavingPerms,
"Problems saving permissions of folder %s!"), cur_folder);
sleep(2);
}
if (stat(cur_folder, &buf) != 0) {
err = errno;
dprint(1, (debugfile, "Error: errno %s attempting to stat file %s\n",
error_description(err), cur_folder));
error2(catgets(elm_msg_cat, ElmSet, ElmLeaveErrorOnStat,
"Error %s on stat(%s)."), error_description(err), cur_folder);
}
/* Close and remove the original folder.
* However, if we are going to copy a temp file of kept messages
* to it, and this is a locked (spool) mailbox, we need to keep
* it locked during this process. Unfortunately,
* if we did our USE_FLOCK_LOCKING or USE_FCNTL_LOCKING unlinking
* the original will kill the lock, so we have to resort to copying
* the temp file to the original file while keeping the original open.
* Also, if the file has a link count > 1, then it has links, so to
* prevent destroying the links, we do a copy back, even though its
* slower. If the file is a symlink, then we also need to do a copy
* back to prevent destroying the linkage.
*/
/*
* fclose(mailfile);
*
* While this fclose is OK for BSD flock file locking, it is
* incorrect for SYSV fcntl file locking. For some reason AT&T
* decided to release all file locks when *any* fd to a file
* is closed, even if it is not the fd that acquired the lock.
* Thus this fclose would release the mailbox file locks.
* Instead I am going to just fflush the file here, and do the
* individual closes in the subcases to ensure that the
* mailbox is locked until we are finished with it.
*/
fflush(mailfile);
if(to_keep) {
#ifdef SYSCALL_LOCKING
need_to_copy = (folder_type == SPOOL ? TRUE : FALSE);
#else
need_to_copy = FALSE;
#endif /* SYSCALL_LOCKING */
if (buf.st_nlink > 1)
need_to_copy = TRUE;
#ifdef SYMLINK
#ifdef S_ISLNK
if (S_ISLNK(buf.st_mode))
#else
if ((buf.st_mode & S_IFMT) == S_IFLNK)
#endif
{
need_to_copy = TRUE;
is_symlink = TRUE;
}
#endif
#ifdef SAVE_GROUP_MAILBOX_ID
if (folder_type == SPOOL)
setgid(mailgroupid);
#endif
if(!need_to_copy) {
unlink(cur_folder);
if (link(temp_keep_file, cur_folder) != 0) {
if(errno == EXDEV || errno == EEXIST) {
/* oops - can't link across file systems - use copy instead */
need_to_copy = TRUE;
} else {
err = errno;
MoveCursor(LINES, 0);
Raw(OFF);
dprint(1, (debugfile, "link(%s, %s) failed (leavembox)\n",
temp_keep_file, cur_folder));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
printf(catgets(elm_msg_cat, ElmSet, ElmLeaveLinkFailed,
"Link failed! %s.\n"), error_description(err));
#ifdef SAVE_GROUP_MAILBOX_ID
if (folder_type == SPOOL)
setgid(groupid);
#endif
unlock();
fclose(mailfile);
emergency_exit();
}
}
}
if(need_to_copy) {
if (copy(temp_keep_file, cur_folder) != 0) {
/* copy to cur_folder failed - try to copy to special file */
err = errno;
dprint(1, (debugfile, "leavembox: copy(%s, %s) failed;",
temp_keep_file, cur_folder));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
error(catgets(elm_msg_cat, ElmSet, ElmLeaveCouldntModifyFolder,
"Couldn't modify folder!"));
sleep(1);
sprintf(cur_folder,"%s/%s", home, unedited_mail);
if (copy(temp_keep_file, cur_folder) != 0) {
/* couldn't copy to special file either */
err = errno;
MoveCursor(LINES, 0);
Raw(OFF);
dprint(1, (debugfile,
"leavembox: couldn't copy to %s either!! Help;",
cur_folder));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
printf(catgets(elm_msg_cat, ElmSet, ElmLeaveCantCopyMailbox,
"Can't copy mailbox, system trouble!!!\n"));
#ifdef SAVE_GROUP_MAILBOX_ID
if (folder_type == SPOOL)
setgid(groupid);
#endif
unlock();
fclose(mailfile);
emergency_exit();
} else {
dprint(1, (debugfile,
"\nWoah! Confused - Saved mail in %s (leavembox)\n",
cur_folder));
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveSavedMailIn,
"Saved mail in %s."), cur_folder);
sleep(1);
}
}
}
/* link or copy complete - remove temp keep file */
unlink(temp_keep_file);
} else if(folder_type == SPOOL || keep_empty_files || resyncing) {
/* if this is an empty spool file, or if this is an empty non spool
* file and we keep empty non spool files (we always keep empty
* spool files), create an empty file */
if(folder_type == NON_SPOOL)
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveKeepingEmpty,
"Keeping empty folder '%s'."), cur_folder);
temp = fopen(cur_folder, "w");
fclose(temp);
}
/*
* restore permissions and access times of folder only if not
* a symlink, as symlinks have no permissions, and not worth
* tracking down what it points to.
*/
if (!is_symlink) {
if(restore_file_stats(cur_folder) != 1) {
error1(catgets(elm_msg_cat, ElmSet, ElmLeaveProblemsRestoringPerms,
"Problems restoring permissions of folder %s!"), cur_folder);
sleep(2);
}
}
#ifdef BSD
utime_buffer[0] = buf.st_atime;
utime_buffer[1] = buf.st_mtime;
#else
utime_buffer.actime = buf.st_atime;
utime_buffer.modtime= buf.st_mtime;
#endif
#ifdef BSD
if (utime(cur_folder, utime_buffer) != 0)
#else
if (utime(cur_folder, &utime_buffer) != 0)
#endif
{
err = errno;
dprint(1, (debugfile,
"Error: encountered error doing utime (leavmbox)\n"));
dprint(1, (debugfile, "** %s **\n", error_description(err)));
error2(catgets(elm_msg_cat, ElmSet, ElmLeaveChangingAccessTime,
"Error %s trying to change file %s access time."),
error_description(err), cur_folder);
}
#ifdef SAVE_GROUP_MAILBOX_ID
if (folder_type == SPOOL)
setgid(groupid);
#endif
mailfile_size = bytes(cur_folder);
unlock(); /* remove the lock on the file ASAP! */
fclose(mailfile);
unblock_signals();
return(1);
}
#ifdef HASSIGPROCMASK
sigset_t toblock, oldset;
#else /* HASSIGPROCMASK */
# ifdef HASSIGBLOCK
int toblock, oldset;
# else /* HASSIGBLOCK */
# ifdef HASSIGHOLD
/* Nothing required */
# else /* HASSIGHOLD */
SIGHAND_TYPE (*oldhup)();
SIGHAND_TYPE (*oldint)();
SIGHAND_TYPE (*oldquit)();
SIGHAND_TYPE (*oldstop)();
# endif /* HASSIGHOLD */
# endif /* HASSIGBLOCK */
#endif /* HASSIGPROCMASK */
/*
* Block all keyboard generated signals. Need to do this while
* rewriting mailboxes to avoid inadvertant corruption. In
* particular, a SIGHUP (from logging out under /bin/sh), can
* corrupt a spool mailbox during an elm autosync.
*/
block_signals()
{
dprint(1,(debugfile, "block_signals\n"));
#ifdef HASSIGPROCMASK
sigemptyset(&oldset);
sigemptyset(&toblock);
sigaddset(&toblock, SIGHUP);
sigaddset(&toblock, SIGINT);
sigaddset(&toblock, SIGQUIT);
#ifdef SIGTSTP
sigaddset(&toblock, SIGTSTP);
#endif /* SIGTSTP */
sigprocmask(SIG_BLOCK, &toblock, &oldset);
#else /* HASSIGPROCMASK */
# ifdef HASSIGBLOCK
toblock = sigmask(SIGHUP) | sigmask(SIGINT) | sigmask(SIGQUIT);
#ifdef SIGTSTP
toblock |= sigmask(SIGTSTP);
#endif /* SIGTSTP */
oldset = sigblock(toblock);
# else /* HASSIGBLOCK */
# ifdef HASSIGHOLD
sighold(SIGHUP);
sighold(SIGINT);
sighold(SIGQUIT);
#ifdef SIGTSTP
sighold(SIGTSTP);
#endif /* SIGTSTP */
# else /* HASSIGHOLD */
oldhup = signal(SIGHUP, SIG_IGN);
oldint = signal(SIGINT, SIG_IGN);
oldquit = signal(SIGQUIT, SIG_IGN);
#ifdef SIGTSTP
oldstop = signal(SIGTSTP, SIG_IGN);
#endif /* SIGTSTP */
# endif /* HASSIGHOLD */
# endif /* HASSIGBLOCK */
#endif /* HASSIGPROCMASK */
}
/*
* Inverse of the previous function. Restore keyboard generated
* signals.
*/
unblock_signals()
{
dprint(1,(debugfile, "unblock_signals\n"));
#ifdef HASSIGPROCMASK
sigprocmask(SIG_SETMASK, &oldset, (sigset_t *)0);
#else /* HASSIGPROCMASK */
# ifdef HASSIGBLOCK
sigsetmask(oldset);
# else /* HASSIGBLOCK */
# ifdef HASSIGHOLD
sigrelse(SIGHUP);
sigrelse(SIGINT);
sigrelse(SIGQUIT);
#ifdef SIGTSTP
sigrelse(SIGTSTP);
#endif /* SIGTSTP */
# else /* HASSIGHOLD */
signal(SIGHUP, oldhup);
signal(SIGINT, oldint);
signal(SIGQUIT, oldquit);
#ifdef SIGTSTP
signal(SIGTSTP, oldstop);
#endif /* SIGTSTP */
# endif /* HASSIGHOLD */
# endif /* HASSIGBLOCK */
#endif /* HASSIGPROCMASK */
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.