This is builtin.c in view mode; [Download] [Up]
static char rcsid[] = "@(#)$Id: builtin.c,v 5.1 1992/10/03 22:58:40 syd Exp $";
/*******************************************************************************
* The Elm Mail System - $Revision: 5.1 $ $State: Exp $
*
* Copyright (c) 1988-1992 USENET Community Trust
* Copyright (c) 1986,1987 Dave Taylor
*******************************************************************************
* Bug reports, patches, comments, suggestions should be sent to:
*
* Syd Weinstein, Elm Coordinator
* elm@DSI.COM dsinc!elm
*
*******************************************************************************
* $Log: builtin.c,v $
* Revision 5.1 1992/10/03 22:58:40 syd
* Initial checkin as of 2.4 Release at PL0
*
*
******************************************************************************/
/** This is the built-in pager for displaying messages while in the Elm
program. It's a bare-bones pager with precious few options. The idea
is that those systems that are sufficiently slow that using an external
pager such as 'more' is too slow, then they can use this!
Also added support for the "builtin+" pager (clears the screen for
each new page) including a two-line overlap for context...
**/
#include "headers.h"
#include "s_elm.h"
#include <ctype.h>
#define BEEP 007 /* ASCII Bell character */
static unfilled_lines,
form_title;
int lines_displayed, /* total number of lines displayed */
total_lines_to_display, /* total number of lines in message */
pages_displayed; /* for the nth page titles and all */
start_builtin(lines_in_message)
int lines_in_message;
{
/** clears the screen and resets the internal counters... **/
dprint(8,(debugfile,
"displaying %d lines from message using internal pager\n",
lines_in_message));
unfilled_lines = LINES;
form_title = 1;
lines_displayed = 0;
pages_displayed = 1;
total_lines_to_display = lines_in_message;
}
extern int tabspacing;
int
next_line(inputptr, inputlenptr, output, outputlenptr, width)
char **inputptr, *output;
register unsigned width;
int *inputlenptr, *outputlenptr;
{
/* Copy characters from input to output and copy
* remainder of output to output. In copying use ^X notation for
* control characters, '?' non-ascii characters, expand tabs
* to correct number of spaces till next tab stop.
* Column zero of the next line is considered to be the tab stop
* that follows the last one that fits on a line.
* Copy until newline/return encountered, null char encountered,
* width characters producted in output buffer.
* Formfeed is handled exceptionally. If encountered it
* is removed from input and 1 is returned. Otherwise 0 is returned.
*/
register char *optr, *iptr;
register unsigned chars_output, nt;
int ret_val;
int ilen = *inputlenptr;
optr = output;
iptr = *inputptr;
chars_output = 0;
ret_val = 0; /* presume no formfeed */
while(ilen > 0) { /* while there is something */
if(chars_output >= width) { /* no more room on line */
*optr++ = '\r';
*optr++ = '\n';
/* if next input character is newline or return,
* we can skip over it since we are outputing a newline anyway */
if((*iptr == '\n') || (*iptr == '\r'))
{ iptr++; --ilen; }
break;
} else if (*iptr == '\n' || *iptr == '\r') { /*newline or return */
*optr++ = '\r';
*optr++ = '\n';
iptr++; --ilen;
break; /* end of line */
} else if(*iptr == '\f') { /* formfeed */
/* if next input character is newline or return,
* we can skip over it since we are outputing a formfeed anyway */
if((*++iptr == '\n') || (*iptr == '\r'))
{ iptr++; --ilen; }
--ilen;
ret_val = 1;
break; /* leave rest of screen clear */
} else if(*iptr == '\t') { /* tab stop */
if((nt=next_tab(chars_output+1)) > width) {
*optr++ = '\n'; /* won't fit on this line - autowrap */
*optr++ = '\r'; /* tab by tabbing so-to-speak to 1st */
iptr++; /* column of next line */
--ilen;
break;
} else { /* will fit - output proper num of spaces */
while(chars_output < nt-1) {
chars_output++;
*optr++ = ' ';
}
iptr++;
--ilen;
}
} else if(isprint(*iptr & 0xff)) { /* isprint requires int, mask to 8 bits to prevent sign ext. */
*optr++ = *iptr++; /* printing character */
chars_output++;
--ilen;
} else { /* non-white space control character */
if(chars_output + 2 <= width) {
*optr++ = '^';
*optr++ = (*iptr == '\177' ? '?' : (*iptr&0177) + 'A' - 1);
iptr++; --ilen;
chars_output += 2;
} else { /* no space on line for both chars */
break;
}
}
}
*optr = '\0';
*inputptr = iptr;
*inputlenptr = ilen;
*outputlenptr = chars_output;
return(ret_val);
}
int
display_line(input_line, input_size)
char *input_line;
int input_size;
{
int percent_done;
/** Display the given line on the screen, taking into account such
dumbness as wraparound and such. If displaying this would put
us at the end of the screen, put out the "MORE" prompt and wait
for some input. Return non-zero if the user terminates the
paging (e.g. 'i') or zero if we should continue. Also,
this will pass back the value of any character the user types in
at the prompt instead, if needed... (e.g. if it can't deal with
it at this point)
**/
char *pending, footer[SLEN], display_buffer[SLEN], ch;
int formfeed, lines_more;
int pending_len = input_size, display_len = 0;
#ifdef MMDF
if (strcmp(input_line, MSG_SEPARATOR) == 0)
strcpy(input_line," ");
#endif /* MMDF */
pending = input_line;
CarriageReturn();
do {
/* while there is more space on the screen - leave prompt line free */
while(unfilled_lines > 0) {
/* display a screen's lineful of the input line
* and reset pending to point to remainder of input line */
formfeed = next_line(&pending, &pending_len, display_buffer, &display_len, COLUMNS);
if(*display_buffer == '\0') { /* no line to display */
if(!formfeed) /* no "formfeed" to display
* need more lines for screen */
return(FALSE);
} else
Write_to_screen(display_buffer, 0);
/* if formfeed, clear remainder of screen */
if(formfeed) {
CleartoEOS();
unfilled_lines=0;
}
else
unfilled_lines--;
/* if screen is not full (leave room for prompt)
* but we've used up input line, return */
if(unfilled_lines > 0 && pending_len == 0)
return(FALSE); /* we need more lines to fill screen */
/* otherwise continue to display next part of input line */
}
/* screen is now full - prompt for user input */
lines_more = total_lines_to_display - lines_displayed;
percent_done = (int)((100L * lines_displayed) / total_lines_to_display);
if (user_level == 0) {
if (lines_more == 1)
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser0,
" There is 1 line left (%d%%). Press <space> for more, or 'i' to return. "),
percent_done);
else
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser0Plural,
" There are %d lines left (%d%%). Press <space> for more, or 'i' to return. "),
lines_more, percent_done);
} else if (user_level == 1) {
if (lines_more == 1)
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser1,
" 1 line more (%d%%). Press <space> for more, 'i' to return. "),
percent_done);
else
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser1Plural,
" %d lines more (%d%%). Press <space> for more, 'i' to return. "),
lines_more, percent_done);
} else {
if (lines_more == 1)
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser2,
" 1 line more (you've seen %d%%) "),
percent_done);
else
MCsprintf(footer, catgets(elm_msg_cat, ElmSet, ElmMoreUser2Plural,
" %d lines more (you've seen %d%%) "),
lines_more, percent_done);
}
MoveCursor(LINES, 0);
StartBold();
Write_to_screen(footer, 0);
EndBold();
switch(ch = ReadCh()) {
case '\n':
case '\r': /* scroll down a line */
unfilled_lines = 1;
ClearLine(LINES);
break;
case ' ': /* scroll a screenful */
unfilled_lines = LINES;
if(clear_pages) {
ClearScreen();
MoveCursor(0,0);
CarriageReturn();
/* output title */
if(title_messages && filter) {
title_for_page(++pages_displayed);
unfilled_lines -= 2;
}
} else ClearLine(LINES);
/* and keep last line to be first line of next
* screenful unless we had a formfeed */
if(!formfeed) {
if(clear_pages)
Write_to_screen(display_buffer, 0);
unfilled_lines--;
}
break;
default: return(ch);
}
CarriageReturn();
} while(pending_len > 0);
return(FALSE);
}
title_for_page(page)
int page;
{
/** Output a nice title for the second thru last pages of the message
we're currently reading. Note - this code is very similar to
that which produces the title for the first page, except that
page number replaces the date and the method by which it
gets to the screen **/
static char title1[SLEN], title2[SLEN];
char titlebuf[SLEN], title3[SLEN], who[SLEN];
static t1_len, t2_len;
register int padding, showing_to;
/* format those parts of the title that are constant for a message */
if(form_title) {
showing_to = tail_of(headers[current-1]->from, who,
headers[current-1]->to);
sprintf(title1, "%s %d/%d ",
headers[current-1]->status & DELETED ? nls_deleted :
headers[current-1]->status & FORM_LETTER ? nls_form: nls_message,
current, message_count);
t1_len = strlen(title1);
sprintf(title2, "%s %s", showing_to? nls_to : nls_from, who);
t2_len = strlen(title2);
}
/* format those parts of the title that vary between pages of a mesg */
sprintf(title3, nls_page, page);
/* truncate or pad title2 portion on the right
* so that line fits exactly to the rightmost column */
padding = COLUMNS - (t1_len + t2_len + strlen(title3));
sprintf(titlebuf, "%s%-*.*s%s\n\r\n\r", title1, t2_len+padding,
t2_len+padding, title2, title3);
/* extra newline is to give a blank line after title */
Write_to_screen(titlebuf, 0);
form_title = 0;
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.