# # Makefile for the AUC TeX distribution # $Id: Makefile,v 5.35 1993/03/23 11:47:51 amanda Exp $ # # Edit the makefile, type `make', and follow the instructions. ##---------------------------------------------------------------------- ## YOU MUST EDIT THE FOLLOWING LINES ##---------------------------------------------------------------------- # Where local software is found prefix=/usr/local #prefix=/home/local/sys/gnu # Where architecture dependent local software go exec_prefix = $(prefix) # Where installed binaries go. bindir = $(exec_prefix)/bin # Where info files go. infodir = $(prefix)/lib/emacs/info # Where the AUC TeX emacs lisp files go. # Set this to "." to specify current directory. # Where manual pages go. mandir=$(prefix)/man/man1 # Where the standard emacs lisp files are located elispdir=$(prefix)/lib/emacs/lisp #elispdir=/home/dist/lib/emacs/lisp # Make sure that this is the same directory as specified by # TeX-lisp-directory in tex-site.el aucdir=$(elispdir)/auctex #aucdir=/home/pd/share/emacs/auctex7 #aucdir=/user/amanda/lib/emacs/auctex ##---------------------------------------------------------------------- ## YOU MAY NEED TO EDIT THESE ##---------------------------------------------------------------------- # Do not change the definition of autodir below, unless you also # update TeX-auto-global in tex-init.el # Where the automatically generated lisp files for your site go. autodir=$(aucdir)/auto # Using emacs in batch mode. EMACS=emacs -batch # Specify the byte-compiler for compiling AUC TeX files ELC=env EMACSLOADPATH=.:$(elispdir):$(elispdir)/bytecomp $(EMACS) -f batch-byte-compile # Specify the byte-compiler for generating style files AUTO= env EMACSLOADPATH=$(aucdir):$(elispdir) $(EMACS) \ -l tex-auto -f TeX-auto-generate-global # Specify the byte-compiler for compiling generated style files AUTOC= env EMACSLOADPATH=$(aucdir):$(elispdir):$(elispdir)/bytecomp $(EMACS) -f batch-byte-compile # Using TeX in batch mode. TEX=tex # Need K&R compiler. Either `cc' or `gcc -traditional' CC = gcc -traditional # Cflags.. Include `-DNEED_STRSTR' if you don't have strstr() in libc CFLAGS = -O # -DNEED_STRSTR # How to run flex. (flex is needed, lex won't do) # if you don't have `flex' you may use the other instead: LEX = flex -8 lacheck.lex #LEX = cp lacheck.noflex.c lex.yy.c # How to move the byte compiled files to their destination. MV = mv ##---------------------------------------------------------------------- ## BELOW THIS LINE ON YOUR OWN RISK! ##---------------------------------------------------------------------- FTPDIR = /pack/ftp/pub/emacs-lisp/alpha MINMAPSRC = min-map.el min-out.el min-key.el ltx-dead.el tex-math.el \ min-ind.el min-ispl.el kill-fix.el MINMAPFILES = README_MINOR $(MINMAPSRC) AUCSRC = $(MINMAPSRC) auc-tex.el auc-ver.el tex-site.el tex-init.el \ tex-auto.el tex-misc.el tex-cpl.el tex-buf.el tex-dbg.el \ ltx-misc.el ltx-env.el ltx-sec.el STYLESRC = style/LATEX.el style/VIRTEX.el style/latex.el \ style/SLITEX.el style/article.el style/letter.el \ style/TEX.el style/book.el style/slitex.el LAHECKFILES= lacheck/Makefile lacheck/lacheck.1 lacheck/lacheck.lex \ lacheck/lacheck.man lacheck/lacheck.noflex.c DOCFILES=doc/Makefile doc/auc-tex.texi doc/ref-card.tex OTHERFILES = COPYING README README_MINOR Makefile $(DOCFILES) $(LACHECKFILES) first: @echo "" @echo " ** Welcome to the AUC TeX installation suite **" @echo "" @echo " Edit the Makefile to suit your needs. Then run:" @echo @echo " make all" @echo @echo " and follow the instructions." @echo @echo " Before you start, you should check that you have" @echo " TeXinfo 2.16 or later installed. The version of" @echo " TeXinfo distributed with GNU Emacs 18.xx is TeXinfo 1." @echo @echo " TeXinfo2 is available for ftp at all major GNU sites." @echo " TeXinfo2 will also be part of GNU Emacs 19.xx." @echo all: main @echo "**********************************************************" @echo "** Before running \`make install' you should edit the " @echo "** file \`tex-site.el' in this directory to suit your" @echo "** local needs. Print out the file \`doc/auc-tex.dvi'" @echo "** and read the section \`Installation' if in doubt." @echo "** Alternatively you may run \`make DocInstall' and read" @echo "** that information via Emacs' info system" @echo "** Then run: \`make install'" @echo "** The Emacs Lisp files will only be recompiled, if" @echo "** you have set aucdir to a different directory." @echo "**********************************************************" main: Doc LaCheck install: main LispInstall LaInstall DocInstall @echo @echo "**********************************************************" @echo "** AUC TeX installation almost completed " @echo "** Still missing is the automatic extraction of symbols" @echo "** and environments from your sites TeX style files." @echo "** To do this, type \`make install-auto'." @echo "** Beware, this takes some time and uses around 300k" @echo "** storage, depending on your the TeX style files. " @echo "** It is possible to use AUC TeX without this information." @echo "**********************************************************" @echo install-auto: @echo "**********************************************************" @echo "** Extracting site information. This may take a while..." @echo "**********************************************************" if [ ! -d $(autodir) ]; then mkdir $(autodir); fi $(AUTO) @echo "**********************************************************" @echo "** If this failed then check that you have set" @echo "** TeX-lisp-directory correctly in tex-site.el" @echo "**********************************************************" @echo @echo "**********************************************************" @echo "** Byte compiling. This will take a while..." @echo "**********************************************************" $(AUTOC) $(autodir)/*.el @echo "**********************************************************" @echo "** Congratulations! AUC TeX installation completed **" @echo "**********************************************************" @echo "** You may want to print the following files: " @echo "** doc/auc-tex.dvi" @echo "** doc/ref-card.dvi" @echo "** Now edit .emacs according to the documentation **" @echo "**********************************************************" @echo LaInstall: LaCheck @echo "**********************************************************" @echo "** Installing LaCheck " @echo "**********************************************************" -(cd lacheck; make install bindir=$(bindir) mandir=$(mandir)) DocInstall: Doc @echo "**********************************************************" @echo "** Preparing AUC TeX \`info' pages" @echo "**********************************************************" -(cd doc; make install infodir=$(infodir)) LispInstall: @echo "**********************************************************" @echo "** Byte compiling AUC TeX. This may take a while..." @echo "**********************************************************" $(ELC) $(AUCSRC) $(STYLESRC) if [ "." != $(aucdir) ] ; \ then \ if [ ! -d $(aucdir) ]; then mkdir $(aucdir); fi ; \ if [ ! -d $(aucdir)/style ]; then mkdir $(aucdir)/style; fi ; \ $(MV) *.elc $(aucdir) ; \ $(MV) style/*.elc $(aucdir)/style ; \ fi LaCheck: @echo "**********************************************************" @echo "** Building LaCheck @echo "**********************************************************" -(cd lacheck; make bindir=$(bindir) \ CC="$(CC)" CFLAGS="$(CFLAGS)" LEX="$(LEX)" ) Doc: @echo "**********************************************************" @echo "** Making AUC TeX documentation @echo "**********************************************************" -(cd doc; make) clean: rm -rf *~ #*# lex.yy.c idetex auctex (cd doc; make clean) (cd lacheck; make clean) dist: -(cd lacheck; make dist) @if [ "X$$TAG" = "X" ]; then echo "*** No tag ***"; exit 1; fi @echo "**********************************************************" @echo "** Making distribution of auctex for release $$TAG" @echo "**********************************************************" rm -f auc-ver.el if [ -d auctex ]; then rm -r auctex; fi OUT=`echo $$TAG | sed s/release_//`; \ echo "(defconst AUC-TeX-version \"$$OUT\" \ \"AUC TeX version number\")" \ "(defconst AUC-TeX-date \"`date`\" \ \"AUC TeX release date\")" \ "(provide 'auc-ver)" > auc-ver.el cvs checkout -r $(TAG) auctex find auctex -name CVS -print | xargs rm -rf cp auc-ver.el auctex (cd auctex/doc; make auc-tex.info) (cd auctex/lacheck; make lacheck.c; cp lacheck.c lacheck.noflex.c) (cd auctex; \ echo AUC TeX $$TAG on `date` > FILELIST; \ echo "----------------------------------------" >> FILELIST; \ ident $(AUCSRC) $(OTHERFILES) >> FILELIST ) OUT=auctex`echo $$TAG | sed s/release//`; \ tar -cf - auctex | gzip > $$OUT.tar.z VER=`echo $$TAG | sed s/release_// | sed s/auctex_//` ; \ (cd auctex; tar -cf - $(MINMAPFILES)) | \ gzip -c >min-map_$$VER.tar.z rm -r auctex # Removed. Don't mail them, send them the address of a ftpmail client. # if [ ! -d split ]; then mkdir split; else rm split/*; fi; \ # cp auctex/FILELIST split; \ # uuencode $$OUT.tar.z $$OUT.tar.z | split -200 - split/auc-tex- #mail: # if [ "X$$WHO" = "X" ]; then echo "*** No reciepient(s) ***"; exit 1; fi # for U in $$WHO; do\ # for F in `ls -1 split`; do\ # echo Sending $$F to $$U ; \ # Mail -s $$F $$U < split/$$F;\ # sleep 10; \ # done; done ftp: @if [ "X$$TAG" = "X" ]; then echo "*** No tag ***"; exit 1; fi @echo "]; then echo "*** No tag ***"; exit 1; fi @echo "**********************************************************" @echo "** Making ftp copy of lacheck for whatever release it is" @echo "**********************************************************" -(cd lacheck; make ftp) @echo "**********************************************************" @echo "** Making ftp copy of minor maps for $$TAG" @echo "** Making ftp copy of outline minor mode for $$TAG" @echo "**********************************************************" VER=`echo $$TAG | sed s/release_// | sed s/auctex_//` ; \ cp min-map_$$VER.tar.z $(FTPDIR) ; \ cd $(FTPDIR) ; \ rm -f min-map.tar.z min-out.tar.z ; \ ln -s min-map_$$VER.tar.z min-map.tar.z ; \ ln -s min-map_$$VER.tar.z min-out.tar.z @echo "**********************************************************" @echo "** Making ftp copy of auc-tex for $$TAG" @echo "**********************************************************" OUT=`echo $$TAG | sed s/release_//` ; \ cp auctex_$$OUT.tar.z $(FTPDIR) ; \ cd $(FTPDIR) ; \ rm -f auctex.tar.z ; \ ln -s auctex_$$OUT.tar.z auctex.tar.z