This is the README for LD-Control.N.b.tar.gz [Download] [Browse] [Up]
ABOUT LD-Control program can control Pioneer LD Players, which have RS-232C port. This application has been tested with Pioneer LD-4300D, it should also work with other models of Pioneer. HOW TO START: If you have a Pioneer LD, connect it with "mac cable" of Pioneer to serial port B. Set baud rate of LD to 4800 baud and Set TxD terminator to <CR> (look Pioneer Manual). Power LD up. Launch the LD-Control. If you have NeXTdimension board, you can connect the video output of LD to NeXTdimension video port one. LET ME KNOW ABOUT YOU: If you have some comments or you want to see more features in this application, contact me. I like to hear from you. Timo Vendelin email: timo.vendelin@vtt.fi fax: +358-0-455 2839 Address: VTT/GRA Attn: Timo Vendelin P.O.Box 160 SF-2101 Espoo FINLAND THANK YOU: Many thanks to Bill Bumgarner and Steve Morrisson. BAD FEATURES: - "hard wired" to serial port B. - "hard wired" terminator to "\r". - Application confuses if power up and down the LD. - Control only Pioneer LD.
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.