This is vmsmap.c in view mode; [Download] [Up]
/* VMS mapping of data and alloc arena for GNU Emacs.
Copyright (C) 1986, 1987 Free Software Foundation, Inc.
This file is part of GNU Emacs.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY. No author or distributor
accepts responsibility to anyone for the consequences of using it
or for whether it serves any particular purpose or works at all,
unless he says so in writing. Refer to the GNU Emacs General Public
License for full details.
Everyone is granted permission to copy, modify and redistribute
GNU Emacs, but only under the conditions described in the
GNU Emacs General Public License. A copy of this license is
supposed to have been given to you along with GNU Emacs so you
can know your rights and responsibilities. It should be in a
file named COPYING. Among other things, the copyright notice
and this notice must be preserved on all copies. */
/* Written by Mukesh Prasad. */
#ifdef VMS
#include "config.h"
#include "lisp.h"
#include <rab.h>
#include <fab.h>
#include <rmsdef.h>
#include <secdef.h>
/* RMS block size */
#define BLOCKSIZE 512
/* Maximum number of bytes to be written in one RMS write.
* Must be a multiple of BLOCKSIZE.
*/
#define MAXWRITE (BLOCKSIZE * 30)
/* This funniness is to ensure that sdata occurs alphabetically BEFORE the
$DATA psect and that edata occurs after ALL Emacs psects. This is
because the VMS linker sorts all psects in a cluster alphabetically
during the linking, unless you use the cluster_psect command. Emacs
uses the cluster command to group all Emacs psects into one cluster;
this keeps the dumped data separate from any loaded libraries. */
globaldef {"$D$ATA"} char sdata[512]; /* Start of saved data area */
globaldef {"__DATA"} char edata[512]; /* End of saved data area */
/* Structure to write into first block of map file.
*/
struct map_data
{
char * sdata; /* Start of data area */
char * edata; /* End of data area */
int datablk; /* Block in file to map data area from/to */
};
static void fill_fab (), fill_rab ();
static int write_data ();
extern char *start_of_data ();
extern int vms_out_initial; /* Defined in malloc.c */
/* Maps in the data and alloc area from the map file.
*/
int
mapin_data (name)
char * name;
{
struct FAB fab;
struct RAB rab;
int status, size;
int inadr[2];
struct map_data map_data;
/* Open map file. */
fab = cc$rms_fab;
fab.fab$b_fac = FAB$M_BIO|FAB$M_GET;
fab.fab$l_fna = name;
fab.fab$b_fns = strlen (name);
status = sys$open (&fab);
if (status != RMS$_NORMAL)
{
printf ("Map file not available, running bare Emacs....\n");
return 0; /* Map file not available */
}
/* Connect the RAB block */
rab = cc$rms_rab;
rab.rab$l_fab = &fab;
rab.rab$b_rac = RAB$C_SEQ;
rab.rab$l_rop = RAB$M_BIO;
status = sys$connect (&rab);
if (status != RMS$_NORMAL)
lib$stop (status);
/* Read the header data */
rab.rab$l_ubf = &map_data;
rab.rab$w_usz = sizeof (map_data);
rab.rab$l_bkt = 0;
status = sys$read (&rab);
if (status != RMS$_NORMAL)
lib$stop (status);
status = sys$close (&fab);
if (status != RMS$_NORMAL)
lib$stop (status);
if (map_data.sdata != start_of_data ())
{
printf ("Start of data area has moved: cannot map in data.\n");
return 0;
}
if (map_data.edata != edata)
{
printf ("End of data area has moved: cannot map in data.\n");
return 0;
}
fab.fab$l_fop |= FAB$M_UFO;
status = sys$open (&fab);
if (status != RMS$_NORMAL)
lib$stop (status);
/* Map data area. */
inadr[0] = map_data.sdata;
inadr[1] = map_data.edata;
status = sys$crmpsc (inadr, 0, 0, SEC$M_CRF | SEC$M_WRT, 0, 0, 0,
fab.fab$l_stv, 0, map_data.datablk, 0, 0);
if (! (status & 1))
lib$stop (status);
}
/* Writes the data and alloc area to the map file.
*/
mapout_data (into)
char * into;
{
struct FAB fab;
struct RAB rab;
int status;
struct map_data map_data;
int datasize, msize;
if (vms_out_initial)
{
error ("Out of initial allocation. Must rebuild emacs with more memory (VMS_ALLOCATION_SIZE).");
return 0;
}
map_data.sdata = start_of_data ();
map_data.edata = edata;
datasize = map_data.edata - map_data.sdata + 1;
map_data.datablk = 2 + (sizeof (map_data) + BLOCKSIZE - 1) / BLOCKSIZE;
/* Create map file. */
fab = cc$rms_fab;
fab.fab$b_fac = FAB$M_BIO|FAB$M_PUT;
fab.fab$l_fna = into;
fab.fab$b_fns = strlen (into);
fab.fab$l_fop = FAB$M_CBT;
fab.fab$b_org = FAB$C_SEQ;
fab.fab$b_rat = 0;
fab.fab$b_rfm = FAB$C_VAR;
fab.fab$l_alq = 1 + map_data.datablk +
((datasize + BLOCKSIZE - 1) / BLOCKSIZE);
status = sys$create (&fab);
if (status != RMS$_NORMAL)
{
error ("Could not create map file");
return 0;
}
/* Connect the RAB block */
rab = cc$rms_rab;
rab.rab$l_fab = &fab;
rab.rab$b_rac = RAB$C_SEQ;
rab.rab$l_rop = RAB$M_BIO;
status = sys$connect (&rab);
if (status != RMS$_NORMAL)
{
error ("RMS connect to map file failed");
return 0;
}
/* Write the header */
rab.rab$l_rbf = &map_data;
rab.rab$w_rsz = sizeof (map_data);
status = sys$write (&rab);
if (status != RMS$_NORMAL)
{
error ("RMS write (header) to map file failed");
return 0;
}
if (! write_data (&rab, map_data.datablk, map_data.sdata, datasize))
return 0;
status = sys$close (&fab);
if (status != RMS$_NORMAL)
{
error ("RMS close on map file failed");
return 0;
}
return 1;
}
static int
write_data (rab, firstblock, data, length)
struct RAB * rab;
char * data;
{
int status;
rab->rab$l_bkt = firstblock;
while (length > 0)
{
rab->rab$l_rbf = data;
rab->rab$w_rsz = length > MAXWRITE ? MAXWRITE : length;
status = sys$write (rab, 0, 0);
if (status != RMS$_NORMAL)
{
error ("RMS write to map file failed");
return 0;
}
data = &data[MAXWRITE];
length -= MAXWRITE;
rab->rab$l_bkt = 0;
}
return 1;
} /* write_data */
#endif /* VMS */
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.