This is final.c in view mode; [Download] [Up]
/* Convert RTL to assembler code and output it, for GNU compiler.
Copyright (C) 1987, 1988, 1989 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* This is the final pass of the compiler.
It looks at the rtl code for a function and outputs assembler code.
Call `final_start_function' to output the assembler code for function entry,
`final' to output assembler code for some RTL code,
`final_end_function' to output assembler code for function exit.
If a function is compiled in several pieces, each piece is
output separately with `final'.
Some optimizations are also done at this level.
Move instructions that were made unnecessary by good register allocation
are detected and omitted from the output. (Though most of these
are removed by the last jump pass.)
Instructions to set the condition codes are omitted when it can be
seen that the condition codes already had the desired values.
In some cases it is sufficient if the inherited condition codes
have related values, but this may require the following insn
(the one that tests the condition codes) to be modified.
The code for the function prologue and epilogue are generated
directly as assembler code by the macros FUNCTION_PROLOGUE and
FUNCTION_EPILOGUE. Those instructions never exist as rtl. */
#include <stdio.h>
#include "config.h"
#include "rtl.h"
#include "regs.h"
#include "insn-config.h"
#include "recog.h"
#include "conditions.h"
#include "gdbfiles.h"
#include "flags.h"
#include "real.h"
#include "output.h"
/* Get N_SLINE and N_SOL from stab.h if we can expect the file to exist. */
#ifdef DBX_DEBUGGING_INFO
#ifdef USG
#include "gstab.h" /* If doing DBX on sysV, use our own stab.h. */
#else
#include <stab.h> /* On BSD, use the system's stab.h. */
#endif /* not USG */
#endif /* DBX_DEBUGGING_INFO */
/* .stabd code for line number. */
#ifndef N_SLINE
#define N_SLINE 0x44
#endif
/* .stabs code for included file name. */
#ifndef N_SOL
#define N_SOL 0x84
#endif
#define min(A,B) ((A) < (B) ? (A) : (B))
rtx peephole ();
void output_asm_insn ();
rtx alter_subreg ();
static int alter_cond ();
void output_asm_label ();
static void output_operand ();
void output_address ();
void output_addr_const ();
static void output_source_line ();
rtx final_scan_insn ();
/* the sdb debugger needs the line given as an offset from the beginning
of the current function -wfs*/
extern int sdb_begin_function_line;
/* Line number of last NOTE. */
static int last_linenum;
/* Number of basic blocks seen so far;
used if profile_block_flag is set. */
static int count_basic_blocks;
/* Nonzero while outputting an `asm' with operands.
This means that inconsistencies are the user's fault, so don't abort.
The precise value is the insn being output, to pass to error_for_asm. */
static rtx this_is_asm_operands;
/* Number of operands of this insn, for an `asm' with operands. */
static int insn_noperands;
/* File in which assembler code is being written. */
extern FILE *asm_out_file;
/* Compare optimization flag. */
static rtx last_ignored_compare = 0;
/* Flag indicating this insn is the start of a new basic block. */
static int new_block = 1;
/* All the symbol-blocks (levels of scoping) in the compilation
are assigned sequence numbers in order of appearance of the
beginnings of the symbol-blocks. Both final and dbxout do this,
and assume that they will both give the same number to each block.
Final uses these sequence numbers to generate assembler label names
LBBnnn and LBEnnn for the beginning and end of the symbol-block.
Dbxout uses the sequence nunbers to generate references to the same labels
from the dbx debugging information.
Sdb records this level at the beginning
of each function, so that when it recurses down the declarations, it may
find the current level, since it outputs the block beginning and endings
at the point in the asm file, where the blocks would begin and end. */
int next_block_index;
/* Chain of all `struct gdbfile's. */
struct gdbfile *gdbfiles;
/* `struct gdbfile' for the last file we wrote a line number for. */
static struct gdbfile *current_gdbfile;
/* Filenum to assign to the next distinct source file encountered. */
static int next_gdb_filenum;
/* This variable contains machine-dependent flags (defined in tm-...h)
set and examined by output routines
that describe how to interpret the condition codes properly. */
CC_STATUS cc_status;
/* During output of an insn, this contains a copy of cc_status
from before the insn. */
CC_STATUS cc_prev_status;
/* Last source file name mentioned in a NOTE insn. */
static char *lastfile;
/* Indexed by hardware reg number, is 1 if that register is ever
used in the current function.
In life_analysis, or in stupid_life_analysis, this is set
up to record the hard regs used explicitly. Reload adds
in the hard regs used for holding pseudo regs. Final uses
it to generate the code in the function prologue and epilogue
to save and restore registers as needed. */
char regs_ever_live[FIRST_PSEUDO_REGISTER];
/* Nonzero means current function must be given a frame pointer.
Set in stmt.c if anything is allocated on the stack there.
Set in reload1.c if anything is allocated on the stack there. */
int frame_pointer_needed;
/* Assign unique numbers to labels generated for profiling. */
int profile_label_no;
/* Length so far allocated in PENDING_BLOCKS. */
static int max_block_depth;
/* Stack of sequence numbers of symbol-blocks of which we have seen the
beginning but not yet the end. Sequence numbers are assigned at
the beginning; this stack allows us to find the sequence number
of a block that is ending. */
static int *pending_blocks;
/* Number of elements currently in use in PENDING_BLOCKS. */
static int block_depth;
/* Nonzero if have enabled APP processing of our assembler output. */
static int app_on;
/* If we are outputting an insn sequence, this contains the sequence rtx.
Zero otherwise. */
rtx final_sequence;
/* Initialize data in final at the beginning of a compilation. */
void
init_final (filename)
char *filename;
{
next_block_index = 2;
lastfile = filename;
app_on = 0;
max_block_depth = 20;
pending_blocks = (int *) xmalloc (20 * sizeof *pending_blocks);
gdbfiles = 0;
next_gdb_filenum = 0;
final_sequence = 0;
}
/* Called at end of source file,
to output the block-profiling table for this entire compilation. */
void
end_final (filename)
char *filename;
{
int i;
if (profile_block_flag)
{
char name[12];
data_section ();
/* Output the main header, of 6 words:
0: 1 if this file's initialized, else 0.
1: address of file name.
2: address of table of counts.
4: number of counts in the table.
5: always 0, for compatibility with Sun.
6: extra word added by GNU: address of address table
which contains addresses of basic blocks,
in parallel with the table of counts. */
ASM_OUTPUT_ALIGN (asm_out_file,
exact_log2 (min (UNITS_PER_WORD,
BIGGEST_ALIGNMENT / BITS_PER_UNIT)));
ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 0);
assemble_integer_zero ();
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 1);
ASM_OUTPUT_INT (asm_out_file, gen_rtx (SYMBOL_REF, Pmode, name));
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 2);
ASM_OUTPUT_INT (asm_out_file, gen_rtx (SYMBOL_REF, Pmode, name));
ASM_OUTPUT_INT (asm_out_file, gen_rtx (CONST_INT, VOIDmode,
count_basic_blocks));
assemble_integer_zero ();
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 3);
ASM_OUTPUT_INT (asm_out_file, gen_rtx (SYMBOL_REF, Pmode, name));
/* Output the file name. */
ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 1);
{
int len = strlen (filename);
char *data_file = (char *) alloca (len + 3);
strcpy (data_file, filename);
if (len > 2 && ! strcmp (".c", data_file + len - 2))
data_file[len - 2] = 0;
else if (len > 2 && ! strcmp (".i", data_file + len - 2))
data_file[len - 2] = 0;
else if (len > 3 && ! strcmp (".co", data_file + len - 3))
data_file[len - 3] = 0;
strcat (data_file, ".d");
assemble_string (data_file, strlen (data_file) + 1);
}
/* Realign data section. */
ASM_OUTPUT_ALIGN (asm_out_file,
exact_log2 (min (UNITS_PER_WORD,
BIGGEST_ALIGNMENT / BITS_PER_UNIT)));
/* Make space for the table of counts. */
ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 2);
ASM_OUTPUT_SKIP (asm_out_file, UNITS_PER_WORD * count_basic_blocks);
/* Output the table of addresses. */
text_section ();
ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 3);
for (i = 0; i < count_basic_blocks; i++)
{
char name[12];
ASM_GENERATE_INTERNAL_LABEL (name, "LPB", i);
ASM_OUTPUT_INT (asm_out_file, gen_rtx (SYMBOL_REF, Pmode, name));
}
/* End with the address of the table of addresses,
so we can find it easily, as the last word in the file's text. */
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 3);
ASM_OUTPUT_INT (asm_out_file, gen_rtx (SYMBOL_REF, Pmode, name));
}
}
/* Enable APP processing of subsequent output.
Used before the output from an `asm' statement. */
void
app_enable ()
{
if (! app_on)
{
fprintf (asm_out_file, ASM_APP_ON);
app_on = 1;
}
}
/* Enable APP processing of subsequent output.
Called from varasm.c before most kinds of output. */
void
app_disable ()
{
if (app_on)
{
fprintf (asm_out_file, ASM_APP_OFF);
app_on = 0;
}
}
/* Return the number of slots filled in the current
delayed branch sequence. */
#ifdef HAVE_DELAYED_BRANCH
int
dbr_sequence_length ()
{
int i;
int slots = 0;
/* It's zero if we are not scheduling or not in a sequence.
(We never count the first insn.) */
if (flag_delayed_branch && final_sequence != 0)
{
for (i = 1; i < XVECLEN (final_sequence, 0); i++)
slots += DBR_INSN_SLOTS (XVECEXP (final_sequence, 0, i));
}
return slots;
}
#endif
/* Output assembler code for the start of a function,
and initialize some of the variables in this file
for the new function. The label for the function and associated
assembler pseudo-ops have already been output in `assemble_function'.
FIRST is the first insn of the rtl for the function being compiled.
FILE is the file to write assembler code to.
WRITE_SYMBOLS says which kind of debugging info to write (or none).
OPTIMIZE is nonzero if we should eliminate redundant
test and compare insns. */
void
final_start_function (first, file, write_symbols, optimize)
rtx first;
FILE *file;
enum debugger write_symbols;
int optimize;
{
block_depth = 0;
this_is_asm_operands = 0;
/* Record beginning of the symbol-block that's the entire function. */
if (write_symbols == GDB_DEBUG)
{
pending_blocks[block_depth++] = next_block_index;
fprintf (file, "\t.gdbbeg %d\n", next_block_index++);
}
/* Initial line number is supposed to be output
before the function's prologue and label
so that the function's address will not appear to be
in the last statement of the preceding function. */
if (NOTE_LINE_NUMBER (first) != NOTE_INSN_DELETED)
{
if (write_symbols == SDB_DEBUG)
/* For sdb, let's not, but say we did.
We need to set last_linenum for sdbout_function_begin,
but we can't have an actual line number before the .bf symbol.
(sdb_begin_function_line is not set,
and other compilers don't do it.) */
last_linenum = NOTE_LINE_NUMBER (first);
else
output_source_line (file, first, write_symbols);
}
/* The Sun386i and perhaps other machines don't work right
if the profiling code comes after the prologue. */
#ifdef PROFILE_BEFORE_PROLOGUE
if (profile_flag)
profile_function (file);
#endif /* PROFILE_BEFORE_PROLOGUE */
#ifdef FUNCTION_PROLOGUE
/* First output the function prologue: code to set up the stack frame. */
FUNCTION_PROLOGUE (file, get_frame_size ());
#endif
#ifdef SDB_DEBUGGING_INFO
next_block_index = 1;
#endif
#ifdef FUNCTION_BLOCK_PROFILER
if (profile_block_flag)
{
FUNCTION_BLOCK_PROFILER (file, profile_label_no);
}
#endif /* FUNCTION_BLOCK_PROFILER */
#ifndef PROFILE_BEFORE_PROLOGUE
if (profile_flag)
profile_function (file);
#endif /* not PROFILE_BEFORE_PROLOGUE */
profile_label_no++;
}
profile_function (file)
FILE *file;
{
int align = min (BIGGEST_ALIGNMENT, BITS_PER_WORD);
extern int current_function_returns_struct;
extern int current_function_needs_context;
int sval = current_function_returns_struct;
int cxt = current_function_needs_context;
data_section ();
ASM_OUTPUT_ALIGN (file, floor_log2 (align / BITS_PER_UNIT));
ASM_OUTPUT_INTERNAL_LABEL (file, "LP", profile_label_no);
assemble_integer_zero ();
text_section ();
#ifdef STRUCT_VALUE_INCOMING_REGNUM
if (sval)
ASM_OUTPUT_REG_PUSH (file, STRUCT_VALUE_INCOMING_REGNUM);
#else
#ifdef STRUCT_VALUE_REGNUM
if (sval)
ASM_OUTPUT_REG_PUSH (file, STRUCT_VALUE_REGNUM);
#endif
#endif
#if 0
#ifdef STATIC_CHAIN_INCOMING_REGNUM
if (cxt)
ASM_OUTPUT_REG_PUSH (file, STATIC_CHAIN_INCOMING_REGNUM);
#else
#ifdef STATIC_CHAIN_REGNUM
if (cxt)
ASM_OUTPUT_REG_PUSH (file, STATIC_CHAIN_REGNUM);
#endif
#endif
#endif /* 0 */
FUNCTION_PROFILER (file, profile_label_no);
#if 0
#ifdef STATIC_CHAIN_INCOMING_REGNUM
if (cxt)
ASM_OUTPUT_REG_POP (file, STATIC_CHAIN_INCOMING_REGNUM);
#else
#ifdef STATIC_CHAIN_REGNUM
if (cxt)
ASM_OUTPUT_REG_POP (file, STATIC_CHAIN_REGNUM);
#endif
#endif
#endif /* 0 */
#ifdef STRUCT_VALUE_INCOMING_REGNUM
if (sval)
ASM_OUTPUT_REG_POP (file, STRUCT_VALUE_INCOMING_REGNUM);
#else
#ifdef STRUCT_VALUE_REGNUM
if (sval)
ASM_OUTPUT_REG_POP (file, STRUCT_VALUE_REGNUM);
#endif
#endif
}
/* Output assembler code for the end of a function.
For clarity, args are same as those of `final_start_function'
even though not all of them are needed. */
void
final_end_function (first, file, write_symbols, optimize)
rtx first;
FILE *file;
enum debugger write_symbols;
int optimize;
{
if (app_on)
{
fprintf (file, ASM_APP_OFF);
app_on = 0;
}
if (write_symbols == GDB_DEBUG)
fprintf (file, "\t.gdbend %d\n", pending_blocks[0]);
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG)
sdbout_end_function (last_linenum);
#endif
#ifdef FUNCTION_EPILOGUE
/* Finally, output the function epilogue:
code to restore the stack frame and return to the caller. */
FUNCTION_EPILOGUE (file, get_frame_size ());
#endif
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG)
sdbout_end_epilogue ();
#endif
/* If FUNCTION_EPILOGUE is not defined, then the function body
itself contains return instructions wherever needed. */
}
/* Output assembler code for some insns: all or part of a function.
For description of args, see `final_start_function', above.
PRESCAN is 1 if we are not really outputting,
just scanning as if we were outputting.
Prescanning deletes and rearranges insns just like ordinary output.
PRESCAN is -2 if we are outputting after having prescanned.
In this case, don't try to delete or rearrange insns
because that has already been done.
Prescanning is done only on certain machines. */
void
final (first, file, write_symbols, optimize, prescan)
rtx first;
FILE *file;
enum debugger write_symbols;
int optimize;
int prescan;
{
register rtx insn;
last_ignored_compare = 0;
new_block = 1;
init_recog ();
CC_STATUS_INIT;
for (insn = NEXT_INSN (first); insn;)
insn = final_scan_insn (insn, file, write_symbols, optimize,
prescan, 0);
}
/* The final scan for one insn, INSN.
Args are same as in `final', except that INSN
is the insn being scanned.
Value returned is the next insn to be scanned.
NOPEEPHOLES is the flag to disallow peephole processing (currently
used for within delayed branch sequence output). */
rtx
final_scan_insn (insn, file, write_symbols, optimize, prescan, nopeepholes)
rtx insn;
FILE *file;
enum debugger write_symbols;
int optimize;
int prescan;
int nopeepholes;
{
register int i;
switch (GET_CODE (insn))
{
case NOTE:
if (prescan > 0)
break;
if (write_symbols == NO_DEBUG)
break;
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_BEG)
{
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG)
sdbout_begin_function (last_linenum);
#endif
break;
}
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG
|| NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
break;
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_DELETED)
break; /* An insn that was "deleted" */
if (app_on)
{
fprintf (file, ASM_APP_OFF);
app_on = 0;
}
if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG)
{
/* Beginning of a symbol-block. Assign it a sequence number
and push the number onto the stack PENDING_BLOCKS. */
if (block_depth == max_block_depth)
{
/* PENDING_BLOCKS is full; make it longer. */
max_block_depth *= 2;
pending_blocks
= (int *) xrealloc (pending_blocks,
max_block_depth * sizeof (int));
}
pending_blocks[block_depth++] = next_block_index;
/* Output debugging info about the symbol-block beginning. */
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG)
sdbout_begin_block (file, last_linenum, next_block_index);
#endif
#ifdef DBX_DEBUGGING_INFO
if (write_symbols == DBX_DEBUG)
ASM_OUTPUT_INTERNAL_LABEL (file, "LBB", next_block_index);
#endif
if (write_symbols == GDB_DEBUG)
fprintf (file, "\t.gdbbeg %d\n", next_block_index);
next_block_index++;
}
else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END)
{
/* End of a symbol-block. Pop its sequence number off
PENDING_BLOCKS and output debugging info based on that. */
--block_depth;
#ifdef DBX_DEBUGGING_INFO
if (write_symbols == DBX_DEBUG && block_depth >= 0)
ASM_OUTPUT_INTERNAL_LABEL (file, "LBE",
pending_blocks[block_depth]);
#endif
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG && block_depth >= 0)
sdbout_end_block (file, last_linenum);
#endif
if (write_symbols == GDB_DEBUG)
fprintf (file, "\t.gdbend %d\n", pending_blocks[block_depth]);
}
else if (NOTE_LINE_NUMBER (insn) > 0)
/* This note is a line-number. */
output_source_line (file, insn, write_symbols);
break;
case BARRIER:
#ifdef ASM_OUTPUT_ALIGN_CODE
ASM_OUTPUT_ALIGN_CODE (file);
#endif
break;
case CODE_LABEL:
CC_STATUS_INIT;
if (prescan > 0)
break;
new_block = 1;
if (app_on)
{
fprintf (file, ASM_APP_OFF);
app_on = 0;
}
#ifdef ASM_OUTPUT_CASE_LABEL
if (NEXT_INSN (insn) != 0
&& GET_CODE (NEXT_INSN (insn)) == JUMP_INSN)
{
rtx nextbody = PATTERN (NEXT_INSN (insn));
/* If this label is followed by a jump-table,
output the two of them together in a special way. */
if (GET_CODE (nextbody) == ADDR_VEC
|| GET_CODE (nextbody) == ADDR_DIFF_VEC)
{
ASM_OUTPUT_CASE_LABEL (file, "L", CODE_LABEL_NUMBER (insn),
NEXT_INSN (insn));
break;
}
}
#endif
ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
break;
default:
{
register rtx body = PATTERN (insn);
int insn_code_number;
char *template;
/* An INSN, JUMP_INSN or CALL_INSN.
First check for special kinds that recog doesn't recognize. */
if (GET_CODE (body) == USE /* These are just declarations */
|| GET_CODE (body) == CLOBBER)
break;
if (profile_block_flag && new_block)
{
rtx real_body = body;
if (GET_CODE (insn) == NOTE)
real_body = PATTERN (next_real_insn (insn));
/* Don't add instructions in front of jump tables. */
if (GET_CODE (real_body) != ADDR_VEC
&& GET_CODE (real_body) != ADDR_DIFF_VEC)
{
new_block = 0;
/* Enable the table of basic-block use counts
to point at the code it applies to. */
ASM_OUTPUT_INTERNAL_LABEL (file, "LPB", count_basic_blocks);
/* Before first insn of this basic block, increment the
count of times it was entered. */
#ifdef BLOCK_PROFILER
BLOCK_PROFILER (file, count_basic_blocks);
#endif
count_basic_blocks++;
}
}
if (GET_CODE (body) == ASM_INPUT)
{
/* There's no telling what that did to the condition codes. */
CC_STATUS_INIT;
if (prescan > 0)
break;
if (! app_on)
{
fprintf (file, ASM_APP_ON);
app_on = 1;
}
fprintf (asm_out_file, "\t%s\n", XSTR (body, 0));
break;
}
/* Detect `asm' construct with operands. */
if (asm_noperands (body) >= 0)
{
int noperands = asm_noperands (body);
rtx *ops;
char *string;
/* There's no telling what that did to the condition codes. */
CC_STATUS_INIT;
if (prescan > 0)
break;
/* alloca won't do here, since only return from `final'
would free it. */
if (noperands > 0)
ops = (rtx *) xmalloc (noperands * sizeof (rtx));
if (! app_on)
{
fprintf (file, ASM_APP_ON);
app_on = 1;
}
/* Get out the operand values. */
string = decode_asm_operands (body, ops, 0, 0, 0);
/* Inhibit aborts on what would otherwise be compiler bugs. */
insn_noperands = noperands;
this_is_asm_operands = insn;
/* Output the insn using them. */
output_asm_insn (string, ops);
this_is_asm_operands = 0;
if (noperands > 0)
free (ops);
break;
}
if (prescan <= 0 && app_on)
{
fprintf (file, ASM_APP_OFF);
app_on = 0;
}
/* Detect insns that are really jump-tables
and output them as such. */
if (GET_CODE (body) == ADDR_VEC)
{
register int vlen, idx;
if (prescan > 0)
break;
vlen = XVECLEN (body, 0);
for (idx = 0; idx < vlen; idx++)
ASM_OUTPUT_ADDR_VEC_ELT (file,
CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 0, idx), 0)));
#ifdef ASM_OUTPUT_CASE_END
ASM_OUTPUT_CASE_END (file,
CODE_LABEL_NUMBER (PREV_INSN (insn)),
insn);
#endif
break;
}
if (GET_CODE (body) == ADDR_DIFF_VEC)
{
register int vlen, idx;
if (prescan > 0)
break;
vlen = XVECLEN (body, 1);
for (idx = 0; idx < vlen; idx++)
ASM_OUTPUT_ADDR_DIFF_ELT (file,
CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 1, idx), 0)),
CODE_LABEL_NUMBER (XEXP (XEXP (body, 0), 0)));
#ifdef ASM_OUTPUT_CASE_END
ASM_OUTPUT_CASE_END (file,
CODE_LABEL_NUMBER (PREV_INSN (insn)),
insn);
#endif
break;
}
if (recog_memoized (insn) == -1
&& GET_CODE (body) == SEQUENCE) /* A delayed-branch sequence */
{
register int i;
if (prescan > 0)
break;
final_sequence = body;
for (i = 0; i < XVECLEN (body, 0); i++)
final_scan_insn (XVECEXP (body, 0, i), file, write_symbols,
optimize, prescan, 1);
final_sequence = 0;
#ifdef DBR_OUTPUT_SEQEND
DBR_OUTPUT_SEQEND (file);
#endif
break;
}
/* We have a real machine instruction as rtl. */
body = PATTERN (insn);
/* Check for redundant test and compare instructions
(when the condition codes are already set up as desired).
This is done only when optimizing; if not optimizing,
it should be possible for the user to alter a variable
with the debugger in between statements
and the next statement should reexamine the variable
to compute the condition codes. */
if (optimize
&& GET_CODE (body) == SET
&& GET_CODE (SET_DEST (body)) == CC0
&& insn != last_ignored_compare)
{
if (GET_CODE (SET_SRC (body)) == SUBREG)
SET_SRC (body) = alter_subreg (SET_SRC (body));
if ((cc_status.value1 != 0
&& rtx_equal_p (SET_SRC (body), cc_status.value1))
|| (cc_status.value2 != 0
&& rtx_equal_p (SET_SRC (body), cc_status.value2)))
{
/* Don't delete insn if has an addressing side-effect */
if (! find_reg_note (insn, REG_INC, 0)
/* or if anything in it is volatile. */
&& ! volatile_refs_p (PATTERN (insn)))
{
/* We don't really delete the insn; just ignore it. */
last_ignored_compare = insn;
break;
}
}
}
/* Following a conditional branch, we have a new basic block. */
if (GET_CODE (insn) == JUMP_INSN && GET_CODE (body) == SET
&& GET_CODE (SET_SRC (body)) != LABEL_REF)
new_block = 1;
/* If this is a conditional branch, maybe modify it
if the cc's are in a nonstandard state
so that it accomplishes the same thing that it would
do straightforwardly if the cc's were set up normally. */
if (cc_status.flags != 0
&& GET_CODE (insn) == JUMP_INSN
&& GET_CODE (body) == SET
&& SET_DEST (body) == pc_rtx
&& GET_CODE (SET_SRC (body)) == IF_THEN_ELSE
/* This is done during prescan; it is not done again
in final scan when prescan has been done. */
&& prescan >= 0)
{
/* This function may alter the contents of its argument
and clear some of the cc_status.flags bits.
It may also return 1 meaning condition now always true
or -1 meaning condition now always false
or 2 meaning condition nontrivial but altered. */
register int result = alter_cond (XEXP (SET_SRC (body), 0));
/* If condition now has fixed value, replace the IF_THEN_ELSE
with its then-operand or its else-operand. */
if (result == 1)
SET_SRC (body) = XEXP (SET_SRC (body), 1);
if (result == -1)
SET_SRC (body) = XEXP (SET_SRC (body), 2);
/* The jump is now either unconditional or a no-op.
If it has become a no-op, don't try to output it.
(It would not be recognized.) */
if (SET_SRC (body) == pc_rtx)
{
PUT_CODE (insn, NOTE);
NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
NOTE_SOURCE_FILE (insn) = 0;
break;
}
/* Rerecognize the instruction if it has changed. */
if (result != 0)
INSN_CODE (insn) = -1;
}
#ifdef STORE_FLAG_VALUE
/* Make same adjustments to instructions that examine the
condition codes without jumping (if this machine has them). */
if (cc_status.flags != 0
&& GET_CODE (body) == SET)
switch (GET_CODE (SET_SRC (body)))
{
case GTU:
case GT:
case LTU:
case LT:
case GEU:
case GE:
case LEU:
case LE:
case EQ:
case NE:
{
register int result;
if (GET_CODE (XEXP (SET_SRC (body), 0)) != CC0)
break;
result = alter_cond (SET_SRC (body));
if (result == 1)
SET_SRC (body) = gen_rtx (CONST_INT, VOIDmode,
STORE_FLAG_VALUE);
if (result == -1)
SET_SRC (body) = const0_rtx;
if (result != 0)
INSN_CODE (insn) = -1;
}
}
#endif /* STORE_FLAG_VALUE */
/* Do machine-specific peephole optimizations if desired. */
if (optimize && !flag_no_peephole && !nopeepholes)
{
rtx next = peephole (insn);
/* When peepholing, if there were notes within the peephole,
emit them before the peephole. */
if (next != 0 && next != NEXT_INSN (insn))
{
rtx note = NEXT_INSN (insn);
rtx prev = PREV_INSN (insn);
while (note != next)
{
final_scan_insn (note, file, write_symbols, optimize,
prescan, nopeepholes);
note = NEXT_INSN (note);
}
/* In case this is prescan, put the notes
in proper position for later rescan. */
note = NEXT_INSN (insn);
PREV_INSN (note) = prev;
NEXT_INSN (prev) = note;
NEXT_INSN (PREV_INSN (next)) = insn;
PREV_INSN (insn) = PREV_INSN (next);
NEXT_INSN (insn) = next;
PREV_INSN (next) = insn;
}
/* PEEPHOLE might have changed this. */
body = PATTERN (insn);
}
/* Try to recognize the instruction.
If successful, verify that the operands satisfy the
constraints for the instruction. Crash if they don't,
since `reload' should have changed them so that they do. */
insn_code_number = recog_memoized (insn);
insn_extract (insn);
for (i = 0; i < insn_n_operands[insn_code_number]; i++)
{
if (GET_CODE (recog_operand[i]) == SUBREG)
recog_operand[i] = alter_subreg (recog_operand[i]);
}
#ifdef REGISTER_CONSTRAINTS
if (! constrain_operands (insn_code_number))
abort ();
#endif
/* Some target machines need to prescan each insn before
it is output. */
#ifdef FINAL_PRESCAN_INSN
FINAL_PRESCAN_INSN (insn, recog_operand,
insn_n_operands[insn_code_number]);
#endif
cc_prev_status = cc_status;
/* Update `cc_status' for this instruction.
The instruction's output routine may change it further.
If the output routine for a jump insn needs to depend
on the cc status, it should look at cc_prev_status. */
NOTICE_UPDATE_CC (body, insn);
/* If the proper template needs to be chosen by some C code,
run that code and get the real template. */
template = insn_template[insn_code_number];
if (template == 0)
{
template = (*insn_outfun[insn_code_number]) (recog_operand, insn);
/* If the C code returns 0, it means that it is a jump insn
which follows a deleted test insn, and that test insn
needs to be reinserted. */
if (template == 0)
{
if (PREV_INSN (insn) != last_ignored_compare)
abort ();
new_block = 0;
return PREV_INSN (insn);
}
}
if (prescan > 0)
break;
/* Output assembler code from the template. */
output_asm_insn (template, recog_operand);
/* Mark this insn as having been output. */
INSN_DELETED_P (insn) = 1;
}
}
return NEXT_INSN (insn);
}
/* Set up FILENAME as the current file for GDB line-number output. */
void
set_current_gdbfile (filename)
char *filename;
{
register struct gdbfile *f;
for (f = gdbfiles; f; f = f->next)
if (!strcmp (f->name, filename))
break;
if (!f)
{
f = (struct gdbfile *) permalloc (sizeof (struct gdbfile));
f->next = gdbfiles;
gdbfiles = f;
f->name = filename;
f->filenum = next_gdb_filenum++;
f->nlines = 0;
}
current_gdbfile = f;
lastfile = filename;
}
/* Output debugging info to the assembler file FILE
based on the NOTE-insn INSN, assumed to be a line number. */
static void
output_source_line (file, insn, write_symbols)
FILE *file;
rtx insn;
enum debugger write_symbols;
{
register char *filename = NOTE_SOURCE_FILE (insn);
last_linenum = NOTE_LINE_NUMBER (insn);
if (write_symbols == GDB_DEBUG)
{
/* Output GDB-format line number info. */
/* If this is not the same source file as last time,
find or assign a GDB-file-number to this file. */
if (filename && (lastfile == 0 || strcmp (filename, lastfile)
|| current_gdbfile == 0))
set_current_gdbfile (filename);
++current_gdbfile->nlines;
fprintf (file, "\t.gdbline %d,%d\n",
current_gdbfile->filenum, NOTE_LINE_NUMBER (insn));
}
if (write_symbols == SDB_DEBUG || write_symbols == DBX_DEBUG)
{
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG
#if 0 /* People like having line numbers even in wrong file! */
/* COFF can't handle multiple source files--lose, lose. */
&& !strcmp (filename, main_input_filename)
#endif
/* COFF relative line numbers must be positive. */
&& last_linenum > sdb_begin_function_line)
{
#ifdef ASM_OUTPUT_SOURCE_LINE
ASM_OUTPUT_SOURCE_LINE (file, last_linenum);
#else
fprintf (file, "\t.ln\t%d\n",
(sdb_begin_function_line
? last_linenum - sdb_begin_function_line : 1));
#endif
}
#endif
#ifdef DBX_DEBUGGING_INFO
if (write_symbols == DBX_DEBUG)
{
/* Write DBX line number data. */
if (filename && (lastfile == 0 || strcmp (filename, lastfile)))
{
#ifdef ASM_OUTPUT_SOURCE_FILENAME
ASM_OUTPUT_SOURCE_FILENAME (file, filename);
#else
fprintf (file, "\t.stabs \"%s\",%d,0,0,Ltext\n",
filename, N_SOL);
#endif
lastfile = filename;
}
}
#ifdef ASM_OUTPUT_SOURCE_LINE
ASM_OUTPUT_SOURCE_LINE (file, NOTE_LINE_NUMBER (insn));
#else
fprintf (file, "\t.stabd %d,0,%d\n",
N_SLINE, NOTE_LINE_NUMBER (insn));
#endif
#endif /* DBX_DEBUGGING_INFO */
}
}
/* If X is a SUBREG, replace it with a REG or a MEM,
based on the thing it is a subreg of. */
rtx
alter_subreg (x)
register rtx x;
{
register rtx y = SUBREG_REG (x);
if (GET_CODE (y) == SUBREG)
y = alter_subreg (y);
if (GET_CODE (y) == REG)
{
/* If the containing reg really gets a hard reg, so do we. */
PUT_CODE (x, REG);
REGNO (x) = REGNO (y) + SUBREG_WORD (x);
}
else if (GET_CODE (y) == MEM)
{
register int offset = SUBREG_WORD (x) * UNITS_PER_WORD;
#ifdef BYTES_BIG_ENDIAN
offset -= (min (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x)))
- min (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (y))));
#endif
PUT_CODE (x, MEM);
MEM_VOLATILE_P (x) = MEM_VOLATILE_P (y);
XEXP (x, 0) = plus_constant (XEXP (y, 0), offset);
}
else if (GET_CODE (y) == CONST_DOUBLE)
return y;
return x;
}
/* Do alter_subreg on all the SUBREGs contained in X. */
static rtx
walk_alter_subreg (x)
rtx x;
{
switch (GET_CODE (x))
{
case PLUS:
case MULT:
XEXP (x, 0) = walk_alter_subreg (XEXP (x, 0));
XEXP (x, 1) = walk_alter_subreg (XEXP (x, 1));
break;
case MEM:
XEXP (x, 0) = walk_alter_subreg (XEXP (x, 0));
break;
case SUBREG:
return alter_subreg (x);
}
return x;
}
/* Given BODY, the body of a jump instruction, alter the jump condition
as required by the bits that are set in cc_status.flags.
Not all of the bits there can be handled at this level in all cases.
The value is normally 0.
1 means that the condition has become always true.
-1 means that the condition has become always false.
2 means that COND has been altered. */
static int
alter_cond (cond)
register rtx cond;
{
int value = 0;
if (cc_status.flags & CC_REVERSED)
{
value = 2;
switch (GET_CODE (cond))
{
case LE:
PUT_CODE (cond, GE);
break;
case GE:
PUT_CODE (cond, LE);
break;
case LT:
PUT_CODE (cond, GT);
break;
case GT:
PUT_CODE (cond, LT);
break;
case LEU:
PUT_CODE (cond, GEU);
break;
case GEU:
PUT_CODE (cond, LEU);
break;
case LTU:
PUT_CODE (cond, GTU);
break;
case GTU:
PUT_CODE (cond, LTU);
break;
}
}
if (cc_status.flags & CC_NOT_POSITIVE)
switch (GET_CODE (cond))
{
case LE:
case LEU:
case GEU:
/* Jump becomes unconditional. */
return 1;
case GT:
case GTU:
case LTU:
/* Jump becomes no-op. */
return -1;
case GE:
PUT_CODE (cond, EQ);
value = 2;
break;
case LT:
PUT_CODE (cond, NE);
value = 2;
break;
}
if (cc_status.flags & CC_NOT_NEGATIVE)
switch (GET_CODE (cond))
{
case GE:
case GEU:
/* Jump becomes unconditional. */
return 1;
case LT:
case LTU:
/* Jump becomes no-op. */
return -1;
case LE:
case LEU:
PUT_CODE (cond, EQ);
value = 2;
break;
case GT:
case GTU:
PUT_CODE (cond, NE);
value = 2;
break;
}
if (cc_status.flags & CC_NO_OVERFLOW)
switch (GET_CODE (cond))
{
case GEU:
/* Jump becomes unconditional. */
return 1;
case LEU:
PUT_CODE (cond, EQ);
value = 2;
break;
case GTU:
PUT_CODE (cond, NE);
value = 2;
break;
case LTU:
/* Jump becomes no-op. */
return -1;
}
if (cc_status.flags & (CC_Z_IN_NOT_N | CC_Z_IN_N))
switch (GET_CODE (cond))
{
case LE:
case LEU:
case GE:
case GEU:
case LT:
case LTU:
case GT:
case GTU:
abort ();
case NE:
PUT_CODE (cond, cc_status.flags & CC_Z_IN_N ? GE : LT);
value = 2;
break;
case EQ:
PUT_CODE (cond, cc_status.flags & CC_Z_IN_N ? LT : GE);
value = 2;
break;
}
return value;
}
/* Report inconsistency between the assembler template and the operands.
In an `asm', it's the user's fault; otherwise, the compiler's fault. */
static void
output_operand_lossage (str)
char *str;
{
if (this_is_asm_operands)
error_for_asm (this_is_asm_operands, "invalid `asm': %s", str);
else
abort ();
}
/* Output of assembler code from a template, and its subroutines. */
/* Output text from TEMPLATE to the assembler output file,
obeying %-directions to substitute operands taken from
the vector OPERANDS.
%N (for N a digit) means print operand N in usual manner.
%lN means require operand N to be a CODE_LABEL or LABEL_REF
and print the label name with no punctuation.
%cN means require operand N to be a constant
and print the constant expression with no punctuation.
%aN means expect operand N to be a memory address
(not a memory reference!) and print a reference
to that address.
%nN means expect operand N to be a constant
and print a constant expression for minus the value
of the operand, with no other punctuation. */
void
output_asm_insn (template, operands)
char *template;
rtx *operands;
{
register char *p;
register int c;
/* An insn may return a null string template
in a case where no assembler code is needed. */
if (*template == 0)
return;
p = template;
putc ('\t', asm_out_file);
#ifdef ASM_OUTPUT_OPCODE
ASM_OUTPUT_OPCODE (asm_out_file, p);
#endif
while (c = *p++)
{
#ifdef ASM_OUTPUT_OPCODE
if (c == '\n')
{
putc (c, asm_out_file);
while ((c = *p) == '\t')
{
putc (c, asm_out_file);
p++;
}
ASM_OUTPUT_OPCODE (asm_out_file, p);
}
else
#endif
if (c != '%')
putc (c, asm_out_file);
else
{
/* %% outputs a single %. */
if (*p == '%')
{
p++;
putc (c, asm_out_file);
}
/* % followed by a letter and some digits
outputs an operand in a special way depending on the letter.
Letters `acln' are implemented here.
Other letters are passed to `output_operand' so that
the PRINT_OPERAND macro can define them. */
else if ((*p >= 'a' && *p <= 'z')
|| (*p >= 'A' && *p <= 'Z'))
{
int letter = *p++;
c = atoi (p);
if (! (*p >= '0' && *p <= '9'))
output_operand_lossage ("operand number missing after %-letter");
else if (this_is_asm_operands && c >= (unsigned) insn_noperands)
output_operand_lossage ("operand number out of range");
else if (letter == 'l')
output_asm_label (operands[c]);
else if (letter == 'a')
output_address (operands[c]);
else if (letter == 'c')
{
if (CONSTANT_ADDRESS_P (operands[c]))
output_addr_const (asm_out_file, operands[c]);
else
output_operand (operands[c], 'c');
}
else if (letter == 'n')
{
if (GET_CODE (operands[c]) == CONST_INT)
fprintf (asm_out_file, "%d", - INTVAL (operands[c]));
else
{
putc ('-', asm_out_file);
output_addr_const (asm_out_file, operands[c]);
}
}
else
output_operand (operands[c], letter);
while ((c = *p) >= '0' && c <= '9') p++;
}
/* % followed by a digit outputs an operand the default way. */
else if (*p >= '0' && *p <= '9')
{
c = atoi (p);
if (this_is_asm_operands && c >= (unsigned) insn_noperands)
output_operand_lossage ("operand number out of range");
else
output_operand (operands[c], 0);
while ((c = *p) >= '0' && c <= '9') p++;
}
/* % followed by punctuation: output something for that
punctuation character alone, with no operand.
The PRINT_OPERAND macro decides what is actually done. */
#ifdef PRINT_OPERAND_PUNCT_VALID_P
else if (PRINT_OPERAND_PUNCT_VALID_P (*p))
output_operand (0, *p++);
#endif
else
output_operand_lossage ("invalid %%-code");
}
}
putc ('\n', asm_out_file);
}
/* Output a LABEL_REF, or a bare CODE_LABEL, as an assembler symbol. */
void
output_asm_label (x)
rtx x;
{
char buf[256];
if (GET_CODE (x) == LABEL_REF)
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0)));
else if (GET_CODE (x) == CODE_LABEL)
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x));
else
output_operand_lossage ("`%l' operand isn't a label");
assemble_name (asm_out_file, buf);
}
/* Print operand X using machine-dependent assembler syntax.
The macro PRINT_OPERAND is defined just to control this function.
CODE is a non-digit that preceded the operand-number in the % spec,
such as 'z' if the spec was `%z3'. CODE is 0 if there was no char
between the % and the digits.
When CODE is a non-letter, X is 0.
The meanings of the letters are machine-dependent and controlled
by PRINT_OPERAND. */
static void
output_operand (x, code)
rtx x;
int code;
{
if (x && GET_CODE (x) == SUBREG)
x = alter_subreg (x);
PRINT_OPERAND (asm_out_file, x, code);
}
/* Print a memory reference operand for address X
using machine-dependent assembler syntax.
The macro PRINT_OPERAND_ADDRESS exists just to control this function. */
void
output_address (x)
rtx x;
{
walk_alter_subreg (x);
PRINT_OPERAND_ADDRESS (asm_out_file, x);
}
/* Print an integer constant expression in assembler syntax.
Addition and subtraction are the only arithmetic
that may appear in these expressions. */
void
output_addr_const (file, x)
FILE *file;
rtx x;
{
char buf[256];
restart:
switch (GET_CODE (x))
{
case SYMBOL_REF:
assemble_name (file, XSTR (x, 0));
break;
case LABEL_REF:
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0)));
assemble_name (asm_out_file, buf);
break;
case CODE_LABEL:
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x));
assemble_name (asm_out_file, buf);
break;
case CONST_INT:
fprintf (file, "%d", INTVAL (x));
break;
case CONST:
x = XEXP (x, 0);
goto restart;
case CONST_DOUBLE:
if (GET_MODE (x) == DImode)
{
/* We can use %d if the number is <32 bits and positive. */
if (CONST_DOUBLE_HIGH (x) || CONST_DOUBLE_LOW (x) < 0)
fprintf (file, "0x%x%08x",
CONST_DOUBLE_HIGH (x), CONST_DOUBLE_LOW (x));
else
fprintf (file, "%d", CONST_DOUBLE_LOW (x));
}
else
/* We can't handle floating point constants;
PRINT_OPERAND must handle them. */
output_operand_lossage ("floating constant misused");
break;
case PLUS:
/* Some assemblers need integer constants to appear last (eg masm). */
if (GET_CODE (XEXP (x, 0)) == CONST_INT)
{
output_addr_const (file, XEXP (x, 1));
if (INTVAL (XEXP (x, 0)) >= 0)
fprintf (file, "+");
output_addr_const (file, XEXP (x, 0));
}
else
{
output_addr_const (file, XEXP (x, 0));
if (INTVAL (XEXP (x, 1)) >= 0)
fprintf (file, "+");
output_addr_const (file, XEXP (x, 1));
}
break;
case MINUS:
output_addr_const (file, XEXP (x, 0));
fprintf (file, "-");
output_addr_const (file, XEXP (x, 1));
break;
default:
output_operand_lossage ("invalid expression as operand");
}
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.