This is clnt.h in view mode; [Download] [Up]
/* @(#)clnt.h 1.1 88/03/04 4.0NFSSRC SMI */
/*
* Copyright (c) 1988 by Sun Microsystems, Inc.
* 1.31 88/02/08 SMI
*/
/*
* clnt.h - Client side remote procedure call interface.
*/
#ifndef _CLNT_
#ifndef _PARAMS
#if defined(__STDC__) || defined(__cplusplus)
#define _PARAMS(ARGS) ARGS
#else
#define _PARAMS(ARGS) ()
#endif
#endif /* _PARAMS */
#define _CLNT_
#ifdef RPC_SUCCESS
/*
* RPC_SUCCESS is also defined in <sys/message.h>
*/
#undef RPC_SUCCESS
#endif
/*
* Rpc calls return an enum clnt_stat. This should be looked at more,
* since each implementation is required to live with this (implementation
* independent) list of errors.
*/
enum clnt_stat {
RPC_SUCCESS=0, /* call succeeded */
/*
* local errors
*/
RPC_CANTENCODEARGS=1, /* can't encode arguments */
RPC_CANTDECODERES=2, /* can't decode results */
RPC_CANTSEND=3, /* failure in sending call */
RPC_CANTRECV=4, /* failure in receiving result */
RPC_TIMEDOUT=5, /* call timed out */
RPC_INTR=18, /* call interrupted */
/*
* remote errors
*/
RPC_VERSMISMATCH=6, /* rpc versions not compatible */
RPC_AUTHERROR=7, /* authentication error */
RPC_PROGUNAVAIL=8, /* program not available */
RPC_PROGVERSMISMATCH=9, /* program version mismatched */
RPC_PROCUNAVAIL=10, /* procedure unavailable */
RPC_CANTDECODEARGS=11, /* decode arguments error */
RPC_SYSTEMERROR=12, /* generic "other problem" */
/*
* callrpc & clnt_create errors
*/
RPC_UNKNOWNHOST=13, /* unknown host name */
RPC_UNKNOWNPROTO=17, /* unkown protocol */
/*
* _ create errors
*/
RPC_PMAPFAILURE=14, /* the pmapper failed in its call */
RPC_PROGNOTREGISTERED=15, /* remote program is not registered */
/*
* unspecified error
*/
RPC_FAILED=16
};
/*
* Error info.
*/
struct rpc_err {
enum clnt_stat re_status;
union {
int RE_errno; /* realated system error */
enum auth_stat RE_why; /* why the auth error occurred */
struct {
u_long low; /* lowest verion supported */
u_long high; /* highest verion supported */
} RE_vers;
struct { /* maybe meaningful if RPC_FAILED */
long s1;
long s2;
} RE_lb; /* life boot & debugging only */
} ru;
#define re_errno ru.RE_errno
#define re_why ru.RE_why
#define re_vers ru.RE_vers
#define re_lb ru.RE_lb
};
/*
* Client rpc handle.
* Created by individual implementations, see e.g. rpc_udp.c.
* Client is responsible for initializing auth, see e.g. auth_none.c.
*/
typedef struct {
AUTH *cl_auth; /* authenticator */
struct clnt_ops {
enum clnt_stat (*cl_call)(); /* call remote procedure */
void (*cl_abort)(); /* abort a call */
void (*cl_geterr)(); /* get specific error code */
bool_t (*cl_freeres)(); /* frees results */
void (*cl_destroy)();/* destroy this structure */
bool_t (*cl_control)();/* the ioctl() of rpc */
} *cl_ops;
caddr_t cl_private; /* private stuff */
} CLIENT;
/*
* client side rpc interface ops
*
* Parameter types are:
*
*/
/*
* enum clnt_stat
* CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)
* CLIENT *rh;
* u_long proc;
* xdrproc_t xargs;
* caddr_t argsp;
* xdrproc_t xres;
* caddr_t resp;
* struct timeval timeout;
*/
#define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \
((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
#define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \
((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
/*
* void
* CLNT_ABORT(rh);
* CLIENT *rh;
*/
#define CLNT_ABORT(rh) ((*(rh)->cl_ops->cl_abort)(rh))
#define clnt_abort(rh) ((*(rh)->cl_ops->cl_abort)(rh))
/*
* struct rpc_err
* CLNT_GETERR(rh);
* CLIENT *rh;
*/
#define CLNT_GETERR(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
#define clnt_geterr(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
/*
* bool_t
* CLNT_FREERES(rh, xres, resp);
* CLIENT *rh;
* xdrproc_t xres;
* caddr_t resp;
*/
#define CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
#define clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
/*
* bool_t
* CLNT_CONTROL(cl, request, info)
* CLIENT *cl;
* u_int request;
* char *info;
*/
#define CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
#define clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
/*
* control operations that apply to both udp and tcp transports
*/
#define CLSET_TIMEOUT 1 /* set timeout (timeval) */
#define CLGET_TIMEOUT 2 /* get timeout (timeval) */
#define CLGET_SERVER_ADDR 3 /* get server's address (sockaddr) */
#define CLGET_SOCKET 6 /* get client's socket (int) */
/*
* udp only control operations
*/
#define CLSET_RETRY_TIMEOUT 4 /* set retry timeout (timeval) */
#define CLGET_RETRY_TIMEOUT 5 /* get retry timeout (timeval) */
/*
* void
* CLNT_DESTROY(rh);
* CLIENT *rh;
*/
#define CLNT_DESTROY(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
#define clnt_destroy(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
/*
* RPCTEST is a test program which is accessable on every rpc
* transport/port. It is used for testing, performance evaluation,
* and network administration.
*/
#define RPCTEST_PROGRAM ((u_long)1)
#define RPCTEST_VERSION ((u_long)1)
#define RPCTEST_NULL_PROC ((u_long)2)
#define RPCTEST_NULL_BATCH_PROC ((u_long)3)
/*
* By convention, procedure 0 takes null arguments and returns them
*/
#define NULLPROC ((u_long)0)
/*
* Below are the client handle creation routines for the various
* implementations of client side rpc. They can return NULL if a
* creation failure occurs.
*/
/*
* Memory based rpc (for speed check and testing)
* CLIENT *
* clntraw_create(prog, vers)
* u_long prog;
* u_long vers;
*/
extern CLIENT *clntraw_create _PARAMS((unsigned long, unsigned long));
/*
* Generic client creation routine. Supported protocols are "udp" and "tcp"
*/
extern CLIENT *
clnt_create(
char *host, /* hostname */
u_long prog, /* program number */
u_long vers, /* version number */
char *prot); /* protocol */
/*
* TCP based rpc
*/
extern CLIENT *
clnttcp_create(
struct sockaddr_in *raddr,
u_long prog,
u_long version,
register int *sockp,
u_int sendsz,
u_int recvsz);
/*
* UDP based rpc.
*/
extern CLIENT *
clntudp_create(
struct sockaddr_in *raddr,
u_long program,
u_long version,
struct timeval wait,
int *sockp);
/*
* Same as above, but you specify max packet sizes.
*/
extern CLIENT *
clntudp_bufcreate(
struct sockaddr_in *raddr,
u_long program,
u_long version,
struct timeval wait,
int *sockp,
u_int sendsz,
u_int recvsz);
/*
* Print why creation failed
*/
extern void clnt_pcreateerror(const char *msg); /* stderr */
extern char *clnt_spcreateerror(const char *msg); /* string */
/*
* Like clnt_perror(), but is more verbose in its output
*/
extern void clnt_perrno(enum clnt_stat num); /* stderr */
/*
* Print an English error message, given the client error code
*/
extern void clnt_perror(CLIENT *clnt, const char *msg); /* stderr */
extern char *clnt_sperror(CLIENT *clnt, const char *msg); /* string */
extern void clnt_syslog(CLIENT *clnt, const char *msg);
/*
* If a creation fails, the following allows the user to figure out why.
*/
struct rpc_createerr {
enum clnt_stat cf_stat;
struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */
};
extern struct rpc_createerr rpc_createerr;
/*
* Copy error message to buffer.
*/
extern char *clnt_sperrno(enum clnt_stat num); /* string */
#define UDPMSGSIZE 8800 /* rpc imposed limit on udp msg size */
#define RPCSMALLMSGSIZE 400 /* a more reasonable packet size */
#endif /*!_CLNT_*/
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.