This is genopini.c in view mode; [Download] [Up]
/* Generate code to initialize optabs from machine description.
Copyright (C) 1993, 1994 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#include <stdio.h>
#include "hconfig.h"
#include "rtl.h"
#include "obstack.h"
#include <ctype.h>
static struct obstack obstack;
struct obstack *rtl_obstack = &obstack;
#define obstack_chunk_alloc xmalloc
#define obstack_chunk_free free
extern void free ();
extern rtx read_rtx ();
char *xmalloc ();
static void fatal ();
void fancy_abort ();
/* Many parts of GCC use arrays that are indexed by machine mode and
contain the insn codes for pattern in the MD file that perform a given
operation on operands of that mode.
These patterns are present in the MD file with names that contain
the mode(s) used and the name of the operation. This program
writes a function `init_all_optabs' that initializes the optabs with
all the insn codes of the relevant patterns present in the MD file.
This array contains a list of optabs that need to be initialized. Within
each string, the name of the pattern to be matched against is delimited
with %( and %). In the string, %a and %b are used to match a short mode
name (the part of the mode name not including `mode' and converted to
lower-case). When writing out the initializer, the entire string is
used. %A and %B are replaced with the full name of the mode; %a and %b
are replaced with the short form of the name, as above.
If %N is present in the pattern, it means the two modes must be consecutive
widths in the same mode class (e.g, QImode and HImode). %I means that
only integer modes should be considered for the next mode, and %F means
that only float modes should be considered.
For some optabs, we store the operation by RTL codes. These are only
used for comparisons. In that case, %c and %C are the lower-case and
upper-case forms of the comparison, respectively. */
/* The reason we use \% is to avoid sequences of the form %-capletter-%
which SCCS treats as magic. This gets warnings which you should ignore. */
char *optabs[] =
{ "extendtab[(int) %B][(int) %A][0] = CODE_FOR_%(extend%a\%b2%)",
"extendtab[(int) %B][(int) %A][1] = CODE_FOR_%(zero_extend%a\%b2%)",
"fixtab[(int) %A][(int) %B][0] = CODE_FOR_%(fix%F\%a%I\%b2%)",
"fixtab[(int) %A][(int) %B][1] = CODE_FOR_%(fixuns%F\%a%b2%)",
"fixtrunctab[(int) %A][(int) %B][0] = CODE_FOR_%(fix_trunc%F\%a%I\%b2%)",
"fixtrunctab[(int) %A][(int) %B][1] = CODE_FOR_%(fixuns_trunc%F\%a%I\%b2%)",
"floattab[(int) %B][(int) %A][0] = CODE_FOR_%(float%I\%a%F\%b2%)",
"floattab[(int) %B][(int) %A][1] = CODE_FOR_%(floatuns%I\%a%F\%b2%)",
"add_optab->handlers[(int) %A].insn_code = CODE_FOR_%(add%a3%)",
"sub_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sub%a3%)",
"smul_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mul%a3%)",
"umul_highpart_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umul%a3_highpart%)",
"smul_highpart_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smul%a3_highpart%)",
"smul_widen_optab->handlers[(int) %B].insn_code = CODE_FOR_%(mul%a%b3%)%N",
"umul_widen_optab->handlers[(int) %B].insn_code = CODE_FOR_%(umul%a%b3%)%N",
"sdiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(div%I\%a3%)",
"udiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(udiv%I\%a3%)",
"sdivmod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(divmod%a4%)",
"udivmod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(udivmod%a4%)",
"smod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mod%a3%)",
"umod_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umod%a3%)",
"flodiv_optab->handlers[(int) %A].insn_code = CODE_FOR_%(div%F\%a3%)",
"ftrunc_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ftrunc%F\%a2%)",
"and_optab->handlers[(int) %A].insn_code = CODE_FOR_%(and%a3%)",
"ior_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ior%a3%)",
"xor_optab->handlers[(int) %A].insn_code = CODE_FOR_%(xor%a3%)",
"ashl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ashl%a3%)",
"ashr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ashr%a3%)",
"lshr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(lshr%a3%)",
"rotl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(rotl%a3%)",
"rotr_optab->handlers[(int) %A].insn_code = CODE_FOR_%(rotr%a3%)",
"smin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smin%I\%a3%)",
"smin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(min%F\%a3%)",
"smax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(smax%I\%a3%)",
"smax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(max%F\%a3%)",
"umin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umin%I\%a3%)",
"umax_optab->handlers[(int) %A].insn_code = CODE_FOR_%(umax%I\%a3%)",
"neg_optab->handlers[(int) %A].insn_code = CODE_FOR_%(neg%a2%)",
"abs_optab->handlers[(int) %A].insn_code = CODE_FOR_%(abs%a2%)",
"sqrt_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sqrt%a2%)",
"sin_optab->handlers[(int) %A].insn_code = CODE_FOR_%(sin%a2%)",
"cos_optab->handlers[(int) %A].insn_code = CODE_FOR_%(cos%a2%)",
"strlen_optab->handlers[(int) %A].insn_code = CODE_FOR_%(strlen%a%)",
"one_cmpl_optab->handlers[(int) %A].insn_code = CODE_FOR_%(one_cmpl%a2%)",
"ffs_optab->handlers[(int) %A].insn_code = CODE_FOR_%(ffs%a2%)",
"mov_optab->handlers[(int) %A].insn_code = CODE_FOR_%(mov%a%)",
"movstrict_optab->handlers[(int) %A].insn_code = CODE_FOR_%(movstrict%a%)",
"cmp_optab->handlers[(int) %A].insn_code = CODE_FOR_%(cmp%a%)",
"tst_optab->handlers[(int) %A].insn_code = CODE_FOR_%(tst%a%)",
"bcc_gen_fctn[(int) %C] = gen_%(b%c%)",
"setcc_gen_code[(int) %C] = CODE_FOR_%(s%c%)",
"reload_in_optab[(int) %A] = CODE_FOR_%(reload_in%a%)",
"reload_out_optab[(int) %A] = CODE_FOR_%(reload_out%a%)",
"movstr_optab[(int) %A] = CODE_FOR_%(movstr%a%)" };
/* Allow linking with print-rtl.c. */
char **insn_name_ptr;
static void
gen_insn (insn)
rtx insn;
{
char *name = XSTR (insn, 0);
int m1, m2, op;
int pindex;
int i;
char *np, *pp, *p, *q;
struct obstack *obstack_ptr;
/* Don't mention instructions whose names are the null string.
They are in the machine description just to be recognized. */
if (*name == 0)
return;
/* See if NAME matches one of the patterns we have for the optabs we know
about. */
for (pindex = 0; pindex < sizeof optabs / sizeof optabs[0]; pindex++)
{
int force_float = 0, force_int = 0;
int force_consec = 0;
int matches = 1;
for (pp = optabs[pindex]; pp[0] != '%' || pp[1] != '('; pp++)
;
for (pp += 2, np = name; matches && ! (pp[0] == '%' && pp[1] == ')');
pp++)
{
if (*pp != '%')
{
if (*pp != *np++)
break;
}
else
switch (*++pp)
{
case 'N':
force_consec = 1;
break;
case 'I':
force_int = 1;
break;
case 'F':
force_float = 1;
break;
case 'c':
for (op = 0; op < NUM_RTX_CODE; op++)
{
for (p = rtx_name[op], q = np; *p; p++, q++)
if (*p != *q)
break;
/* We have to be concerned about matching "gt" and
missing "gtu", e.g., so verify we have reached the
end of thing we are to match. We do not have this
problem with modes since no mode is a prefix of
another. */
if (*p == 0 && *q == 0 && rtx_class[op] == '<')
break;
}
if (op == NUM_RTX_CODE)
matches = 0;
else
np += strlen (rtx_name[op]);
break;
case 'a':
case 'b':
for (i = 0; i < (int) MAX_MACHINE_MODE; i++)
{
for (p = mode_name[i], q = np; *p; p++, q++)
if (tolower (*p) != *q)
break;
if (*p == 0
&& (! force_int || mode_class[i] == MODE_INT)
&& (! force_float || mode_class[i] == MODE_FLOAT))
break;
}
if (i == (int) MAX_MACHINE_MODE)
matches = 0;
else if (*pp == 'a')
m1 = i, np += strlen (mode_name[i]);
else
m2 = i, np += strlen (mode_name[i]);
force_int = force_float = 0;
break;
default:
abort ();
}
}
if (matches && pp[0] == '%' && pp[1] == ')'
&& *np == 0
&& (! force_consec || (int) mode_wider_mode[m1] == m2))
break;
}
if (pindex == sizeof optabs / sizeof optabs[0])
return;
/* We found a match. If this pattern is only conditionally present,
write out the "if" and two extra blanks. */
if (*XSTR (insn, 2) != 0)
printf (" if (HAVE_%s)\n ", name);
printf (" ");
/* Now write out the initialization, making all required substitutions. */
for (pp = optabs[pindex]; *pp; pp++)
{
if (*pp != '%')
printf ("%c", *pp);
else
switch (*++pp)
{
case '(': case ')':
case 'I': case 'F': case 'N':
break;
case 'a':
for (np = mode_name[m1]; *np; np++)
printf ("%c", tolower (*np));
break;
case 'b':
for (np = mode_name[m2]; *np; np++)
printf ("%c", tolower (*np));
break;
case 'A':
printf ("%smode", mode_name[m1]);
break;
case 'B':
printf ("%smode", mode_name[m2]);
break;
case 'c':
printf ("%s", rtx_name[op]);
break;
case 'C':
for (np = rtx_name[op]; *np; np++)
printf ("%c", toupper (*np));
break;
}
}
printf (";\n");
}
char *
xmalloc (size)
unsigned size;
{
register char *val = (char *) malloc (size);
if (val == 0)
fatal ("virtual memory exhausted");
return val;
}
char *
xrealloc (ptr, size)
char *ptr;
unsigned size;
{
char *result = (char *) realloc (ptr, size);
if (!result)
fatal ("virtual memory exhausted");
return result;
}
static void
fatal (s, a1, a2)
char *s;
{
fprintf (stderr, "genopinit: ");
fprintf (stderr, s, a1, a2);
fprintf (stderr, "\n");
exit (FATAL_EXIT_CODE);
}
/* More 'friendly' abort that prints the line and file.
config.h can #define abort fancy_abort if you like that sort of thing. */
void
fancy_abort ()
{
fatal ("Internal gcc abort.");
}
int
main (argc, argv)
int argc;
char **argv;
{
rtx desc;
rtx dummy;
rtx *insn_ptr;
FILE *infile;
register int c;
obstack_init (rtl_obstack);
if (argc <= 1)
fatal ("No input file name.");
infile = fopen (argv[1], "r");
if (infile == 0)
{
perror (argv[1]);
exit (FATAL_EXIT_CODE);
}
init_rtl ();
printf ("/* Generated automatically by the program `genopinit'\n\
from the machine description file `md'. */\n\n");
printf ("#include \"config.h\"\n");
printf ("#include \"rtl.h\"\n");
printf ("#include \"flags.h\"\n");
printf ("#include \"insn-flags.h\"\n");
printf ("#include \"insn-codes.h\"\n");
printf ("#include \"insn-config.h\"\n");
printf ("#include \"recog.h\"\n");
printf ("#include \"expr.h\"\n");
printf ("#include \"reload.h\"\n\n");
printf ("void\ninit_all_optabs ()\n{\n");
/* Read the machine description. */
while (1)
{
c = read_skip_spaces (infile);
if (c == EOF)
break;
ungetc (c, infile);
desc = read_rtx (infile);
if (GET_CODE (desc) == DEFINE_INSN || GET_CODE (desc) == DEFINE_EXPAND)
gen_insn (desc);
}
printf ("}\n");
fflush (stdout);
exit (ferror (stdout) != 0 ? FATAL_EXIT_CODE : SUCCESS_EXIT_CODE);
/* NOTREACHED */
return 0;
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.