! to the table of contents
< to the previous section:
> to the next section:

5.14 What is the best and/or cheapest way to connect a NeXT to a thick Ethernet?

• The University of Waterloo (Audio Research Group) uses an old door-stop PC XT clone with two Western Digital cards (WD8003E Ethercard Plus, $250 CDN each; you should be able to get them for under $200 (US$)) running Vance Morrison's PCRoute (available from accuvax.nwu.edu). You will also need a thickwire transceiver and a drop cable (about $300). In addition, you will need Internet addresses for the NeXT and both PC Ethernet cards (and a subnet address). The documentation for PCRoute contains quite a bit of information on the performance of this setup. This solution requires two subnets. There is another program called PCbridge that allows the machines on the thin and thick wires to be part of the same subnet. This product also does packet filtering, so that packets destined to machines on the same side of the net do not cross over.

• Cabletron sells a MR-2000C Singleport Repeater for $695 that does exactly what you need minus drop cable and transceiver. Their number is (408) 441-9900.

• The march 1992 INMAC networking and connectivity products catalog lists thicknet to thinnet converters. Product number Z903071 price $445. Claims full ieee 802.3 compatibility and diagnostic LED's.
• NuData (908)-842-5757 (USA) sells AUI<->10 base-T boxes for about $149.

• (weiter mit 5.15 How can I connect my NeXT to the telephone line and use it like an answering Machine?)