This is vdcomp.c in view mode; [Download] [Up]
/********************************************************************/
/* Image Decompression Program - C Version for PC, VAX, Unix */
/* and Macintosh systems. */
/* */
/* Decompresses images using Kris Becker's subroutine DECOMP.C */
/* which is included in this program in a shortened version. */
/* */
/* Reads a variable length compressed PDS image and outputs a */
/* fixed length uncompressed image file in PDS format with */
/* labels, image histogram, engineering table, line header table */
/* and an image with PDS, FITS, VICAR or no labels. If used on */
/* a non-byte-swapped machine the image histogram is un-swapped. */
/* */
/********************************************************************/
/* */
/* Use the following commands to compile and link to produce an */
/* executable file: */
/* */
/* On an IBM PC (using Microsoft C Version 5.x) */
/* */
/* cl /c vdcomp.c */
/* link vdcomp/stack:10000; */
/* */
/* On a VAX: */
/* */
/* cc vdcomp */
/* $define lnk$library sys$library:vaxcrtl.olb */
/* link vdcomp */
/* */
/* On a Unix host (Sun, Masscomp) */
/* */
/* cc -o vdcomp vdcomp.c */
/* */
/* On a Macintosh (using Lightspeed C) */
/* */
/* link with the following libraries: */
/* stdio, storage, strings, unix and MacTraps, with MacTraps */
/* and vdcomp in a separate segment. */
/* */
/********************************************************************/
/* */
/* Use the following command to run the program: */
/* */
/* VDCOMP [infile] [outfile] [output format] */
/* */
/* infile - name of compressed image file. */
/* outfile - name of uncompressed output file. */
/* output format - selected from the following list: */
/* */
/* 1 SFDU/PDS format [DEFAULT]. */
/* 2 FITS format. */
/* 3 VICAR format. */
/* 4 Unlabelled binary array. */
/* */
/* On the VAX computer you will need to 'install' the program to */
/* be able to use command line arguments using the following */
/* command: */
/* */
/* $ vdcomp :== $DISKNAME:[DIRECTORY]vdcomp.exe */
/* */
/* where DISKNAME is the disk drive and DIRECTORY is the */
/* directory where VDCOMP.EXE is stored. */
/* */
/********************************************************************/
/* */
/* LIMS */
/* This program has been tested on a VAX 780 (VMS 4.6), SUN */
/* Workstation (UNIX 4.2, release 3.4), an IBM PC */
/* (MICROSOFT 5.1 compiler) and Macintosh IIx using Lightspeed C */
/* version 3.0. When converting to other systems, check for */
/* portability conflicts. */
/* */
/* HIST */
/* datri@convex.com, 11-15-91 added recognition of - as stdout for */
/* output filename; disabled various messages; directed */
/* messages to stderr; added exit status */
/* DEC89 Modified program to handle both Voyager and Viking images.*/
/* OCT89 Converted Voyager decompression program to handle Viking */
/* compressed images. Changed obuf to 'unsigned' to simplify */
/* computation of checksum. */
/* AUG89 Added code to get command line arguments for filenames */
/* and output format; routines to free memory used by the Huffman */
/* tree); fixed the SFDU label output length; and modified the */
/* I/O routines so that the open for Host type 2 uses binary I/O. */
/* JUN89 Fixed READVAR, to get length on 16-bit unswapped hosts. */
/* JUL88 C driver to decompress standard Voyager Compressed images */
/* by Mike Martin 1989/12/02 */
/* */
/* Inputs - Input file to be decompressed. */
/* */
/* Outputs - Output file containing decompressed image. */
/* */
/********************************************************************/
#include <stdio.h>
#define TRUE 1
#define FALSE 0
/* pc i/o defines */
#define O_RDONLY 0x0000 /* open for reading only */
#define O_BINARY 0x8000 /* file mode is binary */
/* vax i/o defines */
#define RECORD_TYPE "rfm=fix" /* VAX fixed length output */
#define CTX "ctx=bin" /* no translation of \n */
#define FOP "fop=cif,sup" /* file processing ops */
typedef struct leaf
{
struct leaf *right;
short int dn;
struct leaf *left;
} NODE;
/*************************************************************************
Declare the tree pointer. This pointer will hold the root of the tree
once the tree is created by the accompanying routine huff_tree.
**************************************************************************/
NODE *tree;
/* subroutine definitions */
void pds_labels();
void fits_labels();
void vicar_labels();
void no_labels();
int check_host();
int get_files();
void open_files();
long swap_long();
void decompress();
void decmpinit();
void free_tree();
long atol();
/* global variables */
int infile;
FILE *outfile;
char inname[1024],outname[1024];
int output_format;
int record_bytes, max_lines;
int line_samples, fits_pad;
long label_checksum = 0L, checksum = 0L;
/*************************************************/
main(argc,argv)
int argc;
char **argv;
{
unsigned char ibuf[2048],obuf[2048];
unsigned char blank=32;
short host,length,total_bytes,line,i;
long x,long_length,hist[511];
int count;
/*********************************************************************/
/* */
/* get host information and input and output files */
/* */
/*********************************************************************/
strcpy(inname," ");
strcpy(outname," ");
output_format = 0;
if (argc == 1); /* prompt user for parameters */
else if (argc == 2 && (strncmp(argv[1],"help",4) == 0 ||
strncmp(argv[1],"HELP",4) == 0 ||
strncmp(argv[1],"?",1) == 0)) {
fprintf(stderr,
"PDS Image Decompression Program. Command line format:\n\n");
fprintf(stderr,"VDCOMP [infile] [outfile] [format code]\n");
fprintf(stderr," infile - name of compressed image file. \n");
fprintf(stderr," outfile - name of uncompressed output file.\n");
fprintf(stderr," output format - selected from the following list:\n");
fprintf(stderr,"\n");
fprintf(stderr," 1 SFDU/PDS format [DEFAULT].\n");
fprintf(stderr," 2 FITS format. \n");
fprintf(stderr," 3 VICAR format. \n");
fprintf(stderr," 4 Unlabelled binary array. \n\n");
exit(1);
}
else {
strcpy(inname,argv[1]);
if (argc >= 3) strcpy(outname,argv[2]);
if (argc == 3) output_format = 1;
if (argc == 4) sscanf(argv[3],"%d",&output_format);
}
host = check_host();
host = get_files(host); /* may change host if VAX */
/*********************************************************************/
/* */
/* read and edit compressed file labels */
/* */
/*********************************************************************/
switch (output_format) {
case 1: pds_labels(host); break;
case 2: fits_labels(host); break;
case 3: vicar_labels(host); break;
case 4: no_labels(host); break;
}
if (record_bytes == 836) { /* set up values for image sizes */
max_lines = 800;
fits_pad = 2240;
line_samples = 800;
}
else {
max_lines = 1056;
fits_pad = 1536;
line_samples = 1204;
}
/*********************************************************************/
/* */
/* process the image histogram */
/* */
/*********************************************************************/
/* need to know record_bytes,hist_count,hist_item_type,item_count.*/
total_bytes = 0;
length = read_var((char *)hist,host);
total_bytes = total_bytes + length;
if (record_bytes == 836) { /* read one more time for Voyager image */
length = read_var((char *)hist+record_bytes,host);
total_bytes = total_bytes + length;
}
if (host == 2 || host == 5) /* If non-byte swapped */
for (i=0; i<256; i++) /* host, swap bytes in */
hist[i] = swap_long(hist[i]); /* the output histogram */
if (output_format == 1) {
if (record_bytes == 836) {
fwrite((char *)hist, record_bytes,1,outfile);
fwrite((char *)hist+record_bytes,length,1,outfile);
}
else {
fwrite((char *)hist, 1024,1,outfile);
total_bytes = 1024;
}
/* pad out the histogram to a multiple of record bytes */
if (record_bytes == 836)
for (i=total_bytes; i<record_bytes*2; i++) fputc(blank,outfile);
else
for (i=total_bytes; i<record_bytes; i++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* process the encoding histogram */
/* don't have to byte-swap because DECOMP.C does it for us */
/* */
/*********************************************************************/
if (record_bytes == 836) {
length = read_var((char *)hist,host);
length = read_var((char *)hist+836,host);
length = read_var((char *)hist+1672,host);
}
else {
length = read_var((char *)hist,host);
length = read_var((char *)hist+1204,host);
}
/*********************************************************************/
/* */
/* process the engineering summary */
/* */
/*********************************************************************/
total_bytes = 0;
length = read_var(ibuf,host);
if (output_format == 1) {
fwrite(ibuf,length,1,outfile);
total_bytes = total_bytes + length;
/* pad out engineering to multiple of record_bytes */
for (i=total_bytes;i<record_bytes;i++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* process the line header table */
/* */
/*********************************************************************/
if (record_bytes == 1204) {
long_length = 0L;
for (i=0; i<1056; i++) {
length = read_var(ibuf,host);
if (output_format == 1) {
fwrite(ibuf,length,1,outfile);
long_length = long_length + length;
}
}
/* pad out engineering to multiple of record_bytes */
if (output_format == 1)
for (x=long_length;x<1204L*55L;x++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* initialize the decompression */
/* */
/*********************************************************************/
if (outfile != stdout)
fprintf(stderr,"\nInitializing decompression routine...");
decmpinit(hist);
/*********************************************************************/
/* */
/* decompress the image */
/* */
/*********************************************************************/
if (outfile!=stdout) fprintf(stderr,"\nDecompressing data...");
line=0;
do {
length = read_var(ibuf,host);
if (length <= 0) break;
long_length = (long)length;
line += 1;
decompress(ibuf, obuf,&long_length, &record_bytes);
if (output_format == 1) {
count = fwrite(obuf,record_bytes,1,outfile);
if (count != 1) {
fprintf(stderr,"\nError writing output file. Aborting program.");
fprintf(stderr,"\nCheck disk space or for duplicate filename.");
exit(1);
}
}
else {
count = fwrite(obuf,line_samples,1,outfile); /* VICAR/FITS/etc */
if (count != 1) {
fprintf(stderr,"\nError writing output file. Aborting program.");
fprintf(stderr,"\nCheck disk space or for duplicate filename.");
exit(1);
}
}
if (record_bytes == 1204) /* do checksum for viking */
for (i=0; i<record_bytes; i++) checksum += (long)obuf[i];
if ((line % 100 == 0) && (outfile != stdout))
fprintf(stderr,"\nline %d",line);
} while (length > 0 && line < max_lines);
if (record_bytes == 1204 && (outfile != stdout))
/* print checksum for viking */
fprintf(stderr,"\n Image label checksum = %ld computed checksum = %ld\n",
label_checksum,checksum);
/* pad out FITS file to a multiple of 2880 */
if (output_format == 2)
for (i=0;i<fits_pad;i++) fputc(blank,outfile);
if (outfile!=stdout) printf("\n");
free_tree(&long_length);
close(infile);
fclose(outfile);
exit(0);
}
/*********************************************************************/
/* */
/* subroutine get_files - get input filenames and open */
/* */
/*********************************************************************/
int get_files(host)
int host;
{
short shortint;
if (inname[0] == ' ') {
printf("\nEnter name of file to be decompressed: ");
gets (inname);
}
if (host == 1 | host == 2) {
if ((infile = open(inname,O_RDONLY | O_BINARY)) <= 0) {
fprintf(stderr,"\ncan't open input file: %s\n",inname);
exit(1);
}
}
else if (host == 3 | host == 5) {
if ((infile = open(inname,O_RDONLY)) <= 0) {
fprintf(stderr,"\ncan't open input file: %s\n",inname);
exit(1);
}
/****************************************************************/
/* If we are on a vax see if the file is in var length format. */
/* This logic is in here in case the vax file has been stored */
/* in fixed or undefined format. This might be necessary since */
/* vax variable length files can't be moved to other computer */
/* systems with standard comm programs (kermit, for example). */
/****************************************************************/
if (host == 3) {
read(infile,&shortint,2);
if (shortint > 0 && shortint < 80) {
host = 4; /* change host to 4 */
printf("This is not a VAX variable length file.");
}
else printf("This is a VAX variable length file.");
lseek(infile,0,0); /* reposition to beginning of file */
}
}
if (output_format == 0)
do {
printf("\nEnter a number for the output format desired:\n");
printf("\n 1. SFDU/PDS format.");
printf("\n 2. FITS format.");
printf("\n 3. VICAR format.");
printf("\n 4. Unlabelled binary array.\n");
printf("\n Enter format number:");
gets(inname);
output_format = atoi(inname);
} while (output_format < 1 || output_format > 4);
if (outname[0] == ' ') {
printf("\nEnter name of uncompressed output file: ");
gets (outname);
}
return(host);
}
/*********************************************************************/
/* */
/* subroutine open_files - open the output file after we get */
/* its record size by reading the input file labels. */
/* */
/*********************************************************************/
void open_files(host)
int *host;
{
if (*host == 1 || *host == 2 || *host == 5) {
if (outname[0] == '-') outfile=stdout;
else if ((outfile = fopen(outname,"wb"))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
else if (*host == 3 || *host == 4) {
if (output_format == 1) { /* write PDS format blocks */
if (record_bytes == 836) {
if ((outfile=fopen(outname,"w"
#ifdef VMS
,"mrs=836",FOP,CTX,RECORD_TYPE
#endif
))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
else {
if ((outfile=fopen(outname,"w"
#ifdef VMS
,"mrs=1204",FOP,CTX,RECORD_TYPE
#endif
))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
}
else if (output_format == 2) { /* write FITS format blocks */
if ((outfile=fopen(outname,"w"
#ifdef VMS
,"mrs=2880",FOP,CTX,RECORD_TYPE
#endif
))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
else { /* write fixed length records */
if (record_bytes == 836) {
if ((outfile=fopen(outname,"w"
#ifdef VMS
,"mrs=800",FOP,CTX,RECORD_TYPE
#endif
))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
else {
if ((outfile=fopen(outname,"w"
#ifdef VMS
,"mrs=1204",FOP,CTX,RECORD_TYPE
#endif
))==NULL) {
fprintf(stderr,"\ncan't open output file: %s\n",outname);
exit(1);
}
}
}
}
}
/*********************************************************************/
/* */
/* subroutine pds_labels - edit PDS labels and write to output file */
/* */
/*********************************************************************/
void pds_labels(host)
int host;
{
char outstring[80],ibuf[2048];
unsigned char cr=13,lf=10,blank=32;
short length,nlen,total_bytes,line,i;
total_bytes = 0;
do {
length = read_var(ibuf,host);
ibuf[length] = '\0';
/******************************************************************/
/* edit labels which need to be changed */
/******************************************************************/
if ((i = strncmp(ibuf,"NJPL1I00PDS1",12)) == 0);
else if ((i = strncmp(ibuf,"CCSD3ZF00001",12)) == 0);
else if ((i = strncmp(ibuf,"/* FILE",16)) == 0);
else if ((i = strncmp(ibuf,"RECORD_TYPE",11)) == 0);
/*****************************************************************/
/* don't write any of these labels out until we get the record */
/* bytes parameter. */
/*****************************************************************/
else if ((i = strncmp(ibuf,"RECORD_BYTES",12)) == 0) {
/*****************************************************************/
/* get the record_bytes value */
/*****************************************************************/
sscanf(ibuf+35,"%d",&record_bytes);
if (record_bytes != 836) record_bytes = 1204;
open_files(&host);
/* now we can write out the SFDU, comment and Record Type labels. */
if (record_bytes == 836)
fwrite("CCSD3ZF0000100000001NJPL3IF0PDS200000001 = SFDU_LABEL",
53,1,outfile);
else
fwrite("CCSD3ZF0000100000001NJPL3IF0PDS200000001 = SFDU_LABEL",
53,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
fwrite("/* FILE FORMAT AND LENGTH */",37,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
fwrite("RECORD_TYPE = FIXED_LENGTH",47,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
/* fix record_bytes parameter for Viking images */
if (record_bytes == 1204) strcpy(ibuf+35,"1204");
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 57 + 39 + 49;
}
else if ((i = strncmp(ibuf,"FILE_RECORDS",12)) == 0) {
/*****************************************************************/
/* change the file_records count */
/*****************************************************************/
if (record_bytes == 836) strcpy(ibuf+35,"806");
else strcpy(ibuf+35,"1115");
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"LABEL_RECORDS",13)) == 0) {
/*****************************************************************/
/* change the label_records count from 56 to 3 */
/*****************************************************************/
if (record_bytes == 836) strcpy(ibuf+35,"3");
else strcpy(ibuf+35,"2");
length -= 1;
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"^IMAGE_HISTOGRAM",16)) == 0) {
/*****************************************************************/
/* change the location pointer of image_histogram to record 4 */
/*****************************************************************/
if (record_bytes == 836) strcpy(ibuf+35,"4");
else strcpy(ibuf+35,"3");
length -= 1;
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"^ENCODING_HISTOGRAM)",19)) == 0);
/*****************************************************************/
/* delete the encoding_histogram location pointer */
/*****************************************************************/
else if ((i = strncmp(ibuf,"^ENGINEERING_TABLE",18)) == 0) {
/*****************************************************************/
/* change the location pointer of engineering_summary to record 6*/
/*****************************************************************/
if (record_bytes == 836) strcpy(ibuf+35,"6");
else strcpy(ibuf+35,"4");
length -= 1;
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"^LINE_HEADER_TABLE",18)) == 0) {
/*****************************************************************/
/* change the location pointer of line header table to record 5 */
/*****************************************************************/
strcpy(ibuf+35,"5");
length -= 1;
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"^IMAGE",6)) == 0) {
/*****************************************************************/
/* change the location pointer of image to record 7 */
/*****************************************************************/
if (record_bytes == 836) {
strcpy(ibuf+35,"7");
length=length-1;
}
else {
strcpy(ibuf+35,"60");
length = length - 2;
}
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
else if ((i = strncmp(ibuf,"OBJECT = ENCODING",
43)) == 0) {
/*****************************************************************/
/* delete the 4 encoding histogram labels */
/*****************************************************************/
for (i=0; i<4; i++) { /* ignore these labels */
length = read_var(ibuf,host);
}
}
else if ((i = strncmp(ibuf," ENCODING",9)) == 0);
/*****************************************************************/
/* delete the encoding type label in the image object */
/*****************************************************************/
else if ((host == 2 || host == 5) && (i = strncmp(ibuf,
" ITEM_TYPE = VAX_INTEGER",46)) == 0) {
/*****************************************************************/
/* change the record_type value from variable to fixed */
/*****************************************************************/
strcpy(ibuf+35,"INTEGER");
length = length - 4;
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
/*****************************************************************/
/* find the checksum and store in label_checksum */
/*****************************************************************/
else if ((i = strncmp(ibuf," CHECKSUM",9)) == 0) {
ibuf[length] = '\0';
label_checksum = atol(ibuf+35);
}
/*****************************************************************/
/* if none of above write out the label to the output file */
/*****************************************************************/
else {
fwrite(ibuf,length,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + length + 2;
}
/*****************************************************************/
/* test for the end of the PDS labels */
/*****************************************************************/
if ((i = strncmp(ibuf,"END",3)) == 0 && length == 3) break;
} while (length > 0);
/* pad out the labels with blanks to multiple of record_bytes */
if (record_bytes == 836)
for (i=total_bytes; i<record_bytes*3; i++) fputc(blank,outfile);
else
for (i=total_bytes; i<record_bytes*2; i++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* subroutine fits_labels - write FITS header to output file */
/* */
/*********************************************************************/
void fits_labels(host)
int host;
{
char ibuf[2048],outstring[80];
short length,nlen,total_bytes,line,i;
unsigned char cr=13,lf=10,blank=32;
do {
length = read_var(ibuf,host);
/*****************************************************************/
/* find the checksum and store in label_checksum */
/*****************************************************************/
if ((i = strncmp(ibuf," CHECKSUM",9)) == 0) {
ibuf[length] = '\0';
label_checksum = atol(ibuf+35);
}
else if ((i = strncmp(ibuf,"RECORD_BYTES",12)) == 0) {
/*****************************************************************/
/* get the record_bytes value */
/*****************************************************************/
sscanf(ibuf+35,"%d",&record_bytes);
if (record_bytes != 836) record_bytes = 1204;
}
/*****************************************************************/
/* read to the end of the PDS labels */
/*****************************************************************/
if ((i = strncmp(ibuf,"END",3)) == 0 && length == 3) break;
} while (length > 0);
open_files(&host);
total_bytes = 0;
strcpy(outstring,"SIMPLE = T");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
strcpy(outstring,"BITPIX = 8");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
strcpy(outstring,"NAXIS = 2");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
if (record_bytes == 836)
strcpy(outstring,"NAXIS1 = 800");
else
strcpy(outstring,"NAXIS1 = 1204");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
if (record_bytes == 836)
strcpy(outstring,"NAXIS2 = 800");
else
strcpy(outstring,"NAXIS2 = 1056");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
strcpy(outstring,"END ");
strcat(outstring," ");
fwrite(outstring,78,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 80;
/* pad out the labels with blanks to multiple of 2880 for FITS */
for (i=total_bytes; i<2880; i++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* subroutine vicar_labels - write vicar labels to output file */
/* */
/*********************************************************************/
void vicar_labels(host)
int host;
{
char ibuf[2048],outstring[80];
short length,nlen,total_bytes,line,i;
unsigned char cr=13,lf=10,blank=32;
do {
length = read_var(ibuf,host);
/*****************************************************************/
/* find the checksum and store in label_checksum */
/*****************************************************************/
if ((i = strncmp(ibuf," CHECKSUM",9)) == 0) {
ibuf[length] = '\0';
label_checksum = atol(ibuf+35);
}
else if ((i = strncmp(ibuf,"RECORD_BYTES",12)) == 0) {
/*****************************************************************/
/* get the record_bytes value */
/*****************************************************************/
sscanf(ibuf+35,"%d",&record_bytes);
if (record_bytes != 836) record_bytes = 1204;
}
/*****************************************************************/
/* read to the end of the PDS labels */
/*****************************************************************/
if ((i = strncmp(ibuf,"END",3)) == 0 && length == 3) break;
} while (length > 0);
open_files(&host);
total_bytes = 0;
if (record_bytes == 836)
strcpy(outstring,
"LBLSIZE=800 FORMAT='BYTE' TYPE='IMAGE' BUFSIZ=800 DIM=2 ");
else
strcpy(outstring,
"LBLSIZE=1204 FORMAT='BYTE' TYPE='IMAGE' BUFSIZ=1204 DIM=2 ");
fwrite(outstring,72,1,outfile);
total_bytes = total_bytes + 72;
if (record_bytes == 836)
strcpy(outstring,
"EOL=0 RECSIZE=800 ORG='BSQ' NL=800 NS=800 NB=1 N1=0 N2=0 N3=0 ");
else
strcpy(outstring,
"EOL=0 RECSIZE=1204 ORG='BSQ' NL=1056 NS=1204 NB=1 N1=0 N2=0 N3=0 ");
total_bytes = total_bytes + 71;
fwrite(outstring,71,1,outfile);
strcpy(outstring,"N4=0 NBB=0 NLB=0");
fwrite(outstring,18,1,outfile);
fprintf(outfile,"%c%c",cr,lf);
total_bytes = total_bytes + 20;
/* pad out the labels with blanks to multiple of record_bytes */
for (i=total_bytes;i<record_bytes;i++) fputc(blank,outfile);
}
/*********************************************************************/
/* */
/* subroutine no_labels - read past the pds labels */
/* */
/*********************************************************************/
void no_labels(host)
int host;
{
char ibuf[2048],outstring[80];
short length,nlen,total_bytes,line,i;
do {
length = read_var(ibuf,host);
/*****************************************************************/
/* find the checksum and store in label_checksum */
/*****************************************************************/
if ((i = strncmp(ibuf," CHECKSUM",9)) == 0) {
ibuf[length] = '\0';
label_checksum = atol(ibuf+35);
}
else if ((i = strncmp(ibuf,"RECORD_BYTES",12)) == 0) {
/*****************************************************************/
/* get the record_bytes value */
/*****************************************************************/
sscanf(ibuf+35,"%d",&record_bytes);
if (record_bytes != 836) record_bytes = 1204;
}
/*****************************************************************/
/* read to the end of the PDS labels */
/*****************************************************************/
if ((i = strncmp(ibuf,"END",3)) == 0 && length == 3) break;
} while (length > 0);
open_files(&host);
}
/*********************************************************************/
/* */
/* subroutine read_var - read variable length records from input file*/
/* */
/*********************************************************************/
read_var(ibuf,host)
char *ibuf;
int host;
{
int length,result,nlen;
char temp;
union /* this union is used to swap 16 and 32 bit integers */
{
char ichar[4];
short slen;
long llen;
} onion;
switch (host) {
case 1: /*******************************************************/
/* IBM PC host */
/*******************************************************/
length = 0;
result = read(infile,&length,2);
nlen = read(infile,ibuf,length+(length%2));
return (length);
case 2: /*******************************************************/
/* Macintosh host */
/*******************************************************/
length = 0;
result = read(infile,onion.ichar,2);
/* byte swap the length field */
temp = onion.ichar[0];
onion.ichar[0]=onion.ichar[1];
onion.ichar[1]=temp;
length = onion.slen; /* left out of earlier versions */
nlen = read(infile,ibuf,length+(length%2));
return (length);
case 3: /*******************************************************/
/* VAX host with variable length support */
/*******************************************************/
length = read(infile,ibuf,2048/* upper bound */);
return (length);
case 4: /*******************************************************/
/* VAX host, but not a variable length file */
/*******************************************************/
length = 0;
result = read(infile,&length,2);
nlen = read(infile,ibuf,length+(length%2));
/* check to see if we crossed a vax record boundary */
while (nlen < length)
nlen += read(infile,ibuf+nlen,length+(length%2)-nlen);
return (length);
case 5: /*******************************************************/
/* Unix workstation host (non-byte-swapped 32 bit host)*/
/*******************************************************/
length = 0;
result = read(infile,onion.ichar,2);
/* byte swap the length field */
temp = onion.ichar[0];
onion.ichar[0]=onion.ichar[1];
onion.ichar[1]=temp;
length = onion.slen;
nlen = read(infile,ibuf,length+(length%2));
return (length);
}
}
/*********************************************************************/
/* */
/* subroutine check_host - find out what kind of machine we are on */
/* */
/*********************************************************************/
int check_host()
{
/* This subroutine checks the attributes of the host computer and
returns a host code number.
*/
char hostname[80];
int swap,host,bits,var;
union
{
char ichar[2];
short ilen;
} onion;
if (sizeof(var) == 4) bits = 32;
else bits = 16;
onion.ichar[0] = 1;
onion.ichar[1] = 0;
if (onion.ilen == 1) swap = TRUE;
else swap = FALSE;
if (bits == 16 && swap == TRUE ) {
host = 1; /* IBM PC host */
strcpy(hostname,
"Host 1 - 16 bit integers with swapping, no var len support.");
}
if (bits == 16 && swap == FALSE ) {
host = 2; /* Non byte swapped 16 bit host */
strcpy(hostname,
"Host 2 - 16 bit integers without swapping, no var len support.");
}
if (bits == 32 && swap == TRUE ) {
host = 3; /* VAX host with var length support */
strcpy(hostname,"Host 3,4 - 32 bit integers with swapping.");
}
if (bits == 32 && swap == FALSE ) {
host = 5; /* OTHER 32-bit host */
strcpy(hostname,
"Host 5 - 32 bit integers without swapping, no var len support.");
}
if ((*outname)!='-') fprintf(stderr,"%s\n",hostname);
return(host);
}
long swap_long(inval) /* swap 4 byte integer */
long inval;
{
union /* this union is used to swap 16 and 32 bit integers */
{
char ichar[4];
short slen;
long llen;
} onion;
char temp;
/* byte swap the input field */
onion.llen = inval;
temp = onion.ichar[0];
onion.ichar[0]=onion.ichar[3];
onion.ichar[3]=temp;
temp = onion.ichar[1];
onion.ichar[1]=onion.ichar[2];
onion.ichar[2]=temp;
return (onion.llen);
}
void decompress(ibuf,obuf,nin,nout)
/****************************************************************************
*_TITLE decompress - decompresses image lines stored in compressed format *
*_ARGS TYPE NAME I/O DESCRIPTION */
char *ibuf; /* I Compressed data buffer */
char *obuf; /* O Decompressed image line */
long int *nin; /* I Number of bytes on input buffer */
long int *nout; /* I Number of bytes in output buffer */
{
/* The external root pointer to tree */
extern NODE *tree;
/* Declare functions called from this routine */
void dcmprs();
/*************************************************************************
This routine is fairly simple as it's only function is to call the
routine dcmprs.
**************************************************************************/
dcmprs(ibuf,obuf,nin,nout,tree);
return;
}
void decmpinit(hist)
/***************************************************************************
*_TITLE decmpinit - initializes the Huffman tree *
*_ARGS TYPE NAME I/O DESCRIPTION */
long int *hist; /* I First-difference histogram. */
{
extern NODE *tree; /* Huffman tree root pointer */
/* Specify the calling function to initialize the tree */
NODE *huff_tree();
/**************************************************************************
Simply call the huff_tree routine and return.
**************************************************************************/
tree = huff_tree(hist);
return;
}
NODE *huff_tree(hist)
/****************************************************************************
*_TITLE huff_tree - constructs the Huffman tree; returns pointer to root *
*_ARGS TYPE NAME I/O DESCRIPTION */
long int *hist; /* I First difference histogram */
{
/* Local variables used */
long int freq_list[512]; /* Histogram frequency list */
NODE **node_list; /* DN pointer array list */
register long int *fp; /* Frequency list pointer */
register NODE **np; /* Node list pointer */
register long int num_freq; /* Number non-zero frequencies in histogram */
long int sum; /* Sum of all frequencies */
register short int num_nodes; /* Counter for DN initialization */
register short int cnt; /* Miscellaneous counter */
short int znull = -1; /* Null node value */
register NODE *temp; /* Temporary node pointer */
/* Functions called */
void sort_freq();
NODE *new_node();
/**************************************************************************
Allocate the array of nodes from memory and initialize these with numbers
corresponding with the frequency list. There are only 511 possible
permutations of first difference histograms. There are 512 allocated
here to adhere to the FORTRAN version.
**************************************************************************/
fp = freq_list;
node_list = (NODE **) malloc(sizeof(temp)*512);
if (node_list == NULL) {
fprintf(stderr,"\nOut of memory in huff_tree!\n");
exit(1);
}
np = node_list;
for (num_nodes=1, cnt=512 ; cnt-- ; num_nodes++) {
/***********************************************************************
The following code has been added to standardize the VAX byte order
for the "long int" type. This code is intended to make the routine
as machine independant as possible.
**********************************************************************/
unsigned char *cp = (unsigned char *) hist++;
unsigned long int j;
short int i;
for (i=4 ; --i >= 0 ; j = (j << 8) | *(cp+i));
/* Now make the assignment */
*fp++ = j;
temp = new_node(num_nodes);
*np++ = temp;
}
(*--fp) = 0; /* Ensure the last element is zeroed out. */
/*************************************************************************
Now, sort the frequency list and eliminate all frequencies of zero.
*************************************************************************/
num_freq = 512;
sort_freq(freq_list,node_list,num_freq);
fp = freq_list;
np = node_list;
for (num_freq=512 ; (*fp) == 0 && (num_freq) ; fp++, np++, num_freq--);
/*************************************************************************
Now create the tree. Note that if there is only one difference value,
it is returned as the root. On each interation, a new node is created
and the least frequently occurring difference is assigned to the right
pointer and the next least frequency to the left pointer. The node
assigned to the left pointer now becomes the combination of the two
nodes and it's frequency is the sum of the two combining nodes.
*************************************************************************/
for (temp=(*np) ; (num_freq--) > 1 ; ) {
temp = new_node(znull);
temp->right = (*np++);
temp->left = (*np);
*np = temp;
*(fp+1) = *(fp+1) + *fp;
*fp++ = 0;
sort_freq(fp,np,num_freq);
}
return temp;
}
NODE *new_node(value)
/****************************************************************************
*_TITLE new_node - allocates a NODE structure and returns a pointer to it *
*_ARGS TYPE NAME I/O DESCRIPTION */
short int value; /* I Value to assign to DN field */
{
NODE *temp; /* Pointer to the memory block */
/************************************************************************
Allocate the memory and intialize the fields.
************************************************************************/
temp = (NODE *) malloc(sizeof(NODE));
if (temp != NULL) {
temp->right = NULL;
temp->dn = value;
temp->left = NULL;
}
else {
fprintf(stderr,"\nOut of memory in new_node!\n");
exit(1);
}
return temp;
}
void sort_freq(freq_list,node_list,num_freq)
/****************************************************************************
*_TITLE sort_freq - sorts frequency and node lists in increasing freq. order*
*_ARGS TYPE NAME I/O DESCRIPTION */
long int *freq_list; /* I Pointer to frequency list */
NODE **node_list; /* I Pointer to array of node pointers */
long int num_freq; /* I Number of values in freq list */
{
/* Local Variables */
register long int *i; /* primary pointer into freq_list */
register long int *j; /* secondary pointer into freq_list */
register NODE **k; /* primary pointer to node_list */
register NODE **l; /* secondary pointer into node_list */
long int temp1; /* temporary storage for freq_list */
NODE *temp2; /* temporary storage for node_list */
register long int cnt; /* count of list elements */
/*********************************************************************
Save the current element - starting with the second - in temporary
storage. Compare with all elements in first part of list moving
each up one element until the element is larger. Insert current
element at this point in list.
*********************************************************************/
if (num_freq <= 0) return; /* If no elements or invalid, return */
for (i=freq_list, k=node_list, cnt=num_freq ; --cnt ; *j=temp1, *l=temp2) {
temp1 = *(++i);
temp2 = *(++k);
for (j = i, l = k ; *(j-1) > temp1 ; ) {
*j = *(j-1);
*l = *(l-1);
j--;
l--;
if ( j <= freq_list) break;
}
}
return;
}
void dcmprs(ibuf,obuf,nin,nout,root)
/****************************************************************************
*_TITLE dcmprs - decompresses Huffman coded compressed image lines *
*_ARGS TYPE NAME I/O DESCRIPTION */
char *ibuf; /* I Compressed data buffer */
char *obuf; /* O Decompressed image line */
long int *nin; /* I Number of bytes on input buffer */
long int *nout; /* I Number of bytes in output buffer */
NODE *root; /* I Huffman coded tree */
{
/* Local Variables */
register NODE *ptr = root; /* pointer to position in tree */
register unsigned char test; /* test byte for bit set */
register unsigned char idn; /* input compressed byte */
register char odn; /* last dn value decompressed */
char *ilim = ibuf + *nin; /* end of compressed bytes */
char *olim = obuf + *nout; /* end of output buffer */
/**************************************************************************
Check for valid input values for nin, nout and make initial assignments.
**************************************************************************/
if (ilim > ibuf && olim > obuf)
odn = *obuf++ = *ibuf++;
else {
fprintf(stderr,"\nInvalid byte count in dcmprs!\n");
exit(1);
}
/************************************************************************
Decompress the input buffer. Assign the first byte to the working
variable, idn. An arithmatic and (&) is performed using the variable
'test' that is bit shifted to the right. If the result is 0, then
go to right else go to left.
************************************************************************/
for (idn=(*ibuf) ; ibuf < ilim ; idn =(*++ibuf)) {
for (test=0x80 ; test ; test >>= 1) {
ptr = (test & idn) ? ptr->left : ptr->right;
if (ptr->dn != -1) {
if (obuf >= olim) return;
odn -= ptr->dn + 256;
*obuf++ = odn;
ptr = root;
}
}
}
return;
}
void free_tree(nfreed)
/****************************************************************************
*_TITLE free_tree - free memory of all allocated nodes *
*_ARGS TYPE NAME I/O DESCRIPTION */
long int *nfreed; /* O Return of total count of nodes *
* freed. */
/*
*_DESCR This routine is supplied to the programmer to free up all the *
* allocated memory required to build the huffman tree. The count *
* of the nodes freed is returned in the parameter 'nfreed'. The *
* purpose of the routine is so if the user wishes to decompress more *
* than one file per run, the program will not keep allocating new *
* memory without first deallocating all previous nodes associated *
* with the previous file decompression. *
*_HIST 16-AUG-89 Kris Becker USGS, Flagstaff Original Version *
*_END *
****************************************************************************/
{
long int total_free = 0;
extern NODE *tree; /* Huffman tree root pointer */
/* Specify the function to free the tree */
long int free_node();
/****************************************************************
Simply call the free_node routine and return the result.
****************************************************************/
*nfreed = free_node(tree,total_free);
return;
}
long int free_node(pnode,total_free)
/***************************************************************************
*_TITLE free_node - deallocates an allocated NODE pointer
*_ARGS TYPE NAME I/O DESCRIPTION */
NODE *pnode; /* I Pointer to node to free */
long int total_free; /* I Total number of freed nodes */
/*
*_DESCR free_node will check both right and left pointers of a node *
* and then free the current node using the free() C utility. *
* Note that all nodes attached to the node via right or left *
* pointers area also freed, so be sure that this is the desired *
* result when calling this routine. *
* This routine is supplied to allow successive calls to the *
* decmpinit routine. It will free up the memory allocated *
* by previous calls to the decmpinit routine. The call to free *
* a previous huffman tree is: total = free_node(tree,(long) 0); *
* This call must be done by the programmer application routine *
* and is not done by any of these routines. *
*_HIST 16-AUG-89 Kris Becker U.S.G.S Flagstaff Original Version */
{
if (pnode == (NODE *) NULL) return(total_free);
if (pnode->right != (NODE *) NULL)
total_free = free_node(pnode->right,total_free);
if (pnode->left != (NODE *) NULL)
total_free = free_node(pnode->left,total_free);
free((char *) pnode);
return(total_free + 1);
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.