This is hppa-tdep.c in view mode; [Download] [Up]
/* Target-dependent code for the HP PA architecture, for GDB.
Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Free Software Foundation, Inc.
Contributed by the Center for Software Science at the
University of Utah (pa-gdb-bugs@cs.utah.edu).
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "value.h"
/* For argument passing to the inferior */
#include "symtab.h"
#ifdef USG
#include <sys/types.h>
#endif
#include <sys/param.h>
#include <sys/dir.h>
#include <signal.h>
#include <sys/ioctl.h>
#ifdef COFF_ENCAPSULATE
#include "a.out.encap.h"
#else
#include <a.out.h>
#endif
#ifndef N_SET_MAGIC
#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
#endif
/*#include <sys/user.h> After a.out.h */
#include <sys/file.h>
#include <sys/stat.h>
#include <machine/psl.h>
#include "wait.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
#include "symfile.h"
#include "objfiles.h"
static int restore_pc_queue PARAMS ((struct frame_saved_regs *));
static int hppa_alignof PARAMS ((struct type *));
CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *));
static int prologue_inst_adjust_sp PARAMS ((unsigned long));
static int is_branch PARAMS ((unsigned long));
static int inst_saves_gr PARAMS ((unsigned long));
static int inst_saves_fr PARAMS ((unsigned long));
static int pc_in_interrupt_handler PARAMS ((CORE_ADDR));
static int pc_in_linker_stub PARAMS ((CORE_ADDR));
static int compare_unwind_entries PARAMS ((const struct unwind_table_entry *,
const struct unwind_table_entry *));
static void read_unwind_info PARAMS ((struct objfile *));
static void internalize_unwinds PARAMS ((struct objfile *,
struct unwind_table_entry *,
asection *, unsigned int,
unsigned int, CORE_ADDR));
static void pa_print_registers PARAMS ((char *, int, int));
static void pa_print_fp_reg PARAMS ((int));
/* Routines to extract various sized constants out of hppa
instructions. */
/* This assumes that no garbage lies outside of the lower bits of
value. */
int
sign_extend (val, bits)
unsigned val, bits;
{
return (int)(val >> bits - 1 ? (-1 << bits) | val : val);
}
/* For many immediate values the sign bit is the low bit! */
int
low_sign_extend (val, bits)
unsigned val, bits;
{
return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
}
/* extract the immediate field from a ld{bhw}s instruction */
unsigned
get_field (val, from, to)
unsigned val, from, to;
{
val = val >> 31 - to;
return val & ((1 << 32 - from) - 1);
}
unsigned
set_field (val, from, to, new_val)
unsigned *val, from, to;
{
unsigned mask = ~((1 << (to - from + 1)) << (31 - from));
return *val = *val & mask | (new_val << (31 - from));
}
/* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
extract_3 (word)
unsigned word;
{
return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17);
}
extract_5_load (word)
unsigned word;
{
return low_sign_extend (word >> 16 & MASK_5, 5);
}
/* extract the immediate field from a st{bhw}s instruction */
int
extract_5_store (word)
unsigned word;
{
return low_sign_extend (word & MASK_5, 5);
}
/* extract the immediate field from a break instruction */
unsigned
extract_5r_store (word)
unsigned word;
{
return (word & MASK_5);
}
/* extract the immediate field from a {sr}sm instruction */
unsigned
extract_5R_store (word)
unsigned word;
{
return (word >> 16 & MASK_5);
}
#ifdef NeXT
/* extract the immediate field from a bb instruction */
unsigned
extract_5Q_store (word)
unsigned word;
{
return (word >> 21 & MASK_5);
}
#endif /* NeXT */
/* extract an 11 bit immediate field */
int
extract_11 (word)
unsigned word;
{
return low_sign_extend (word & MASK_11, 11);
}
/* extract a 14 bit immediate field */
int
extract_14 (word)
unsigned word;
{
return low_sign_extend (word & MASK_14, 14);
}
/* deposit a 14 bit constant in a word */
unsigned
deposit_14 (opnd, word)
int opnd;
unsigned word;
{
unsigned sign = (opnd < 0 ? 1 : 0);
return word | ((unsigned)opnd << 1 & MASK_14) | sign;
}
/* extract a 21 bit constant */
int
extract_21 (word)
unsigned word;
{
int val;
word &= MASK_21;
word <<= 11;
val = GET_FIELD (word, 20, 20);
val <<= 11;
val |= GET_FIELD (word, 9, 19);
val <<= 2;
val |= GET_FIELD (word, 5, 6);
val <<= 5;
val |= GET_FIELD (word, 0, 4);
val <<= 2;
val |= GET_FIELD (word, 7, 8);
return sign_extend (val, 21) << 11;
}
/* deposit a 21 bit constant in a word. Although 21 bit constants are
usually the top 21 bits of a 32 bit constant, we assume that only
the low 21 bits of opnd are relevant */
unsigned
deposit_21 (opnd, word)
unsigned opnd, word;
{
unsigned val = 0;
val |= GET_FIELD (opnd, 11 + 14, 11 + 18);
val <<= 2;
val |= GET_FIELD (opnd, 11 + 12, 11 + 13);
val <<= 2;
val |= GET_FIELD (opnd, 11 + 19, 11 + 20);
val <<= 11;
val |= GET_FIELD (opnd, 11 + 1, 11 + 11);
val <<= 1;
val |= GET_FIELD (opnd, 11 + 0, 11 + 0);
return word | val;
}
/* extract a 12 bit constant from branch instructions */
int
extract_12 (word)
unsigned word;
{
return sign_extend (GET_FIELD (word, 19, 28) |
GET_FIELD (word, 29, 29) << 10 |
(word & 0x1) << 11, 12) << 2;
}
/* extract a 17 bit constant from branch instructions, returning the
19 bit signed value. */
int
extract_17 (word)
unsigned word;
{
return sign_extend (GET_FIELD (word, 19, 28) |
GET_FIELD (word, 29, 29) << 10 |
GET_FIELD (word, 11, 15) << 11 |
(word & 0x1) << 16, 17) << 2;
}
#ifndef NeXT
/* Compare the start address for two unwind entries returning 1 if
the first address is larger than the second, -1 if the second is
larger than the first, and zero if they are equal. */
static int
compare_unwind_entries (a, b)
const struct unwind_table_entry *a;
const struct unwind_table_entry *b;
{
if (a->region_start > b->region_start)
return 1;
else if (a->region_start < b->region_start)
return -1;
else
return 0;
}
static void
internalize_unwinds (objfile, table, section, entries, size, text_offset)
struct objfile *objfile;
struct unwind_table_entry *table;
asection *section;
unsigned int entries, size;
CORE_ADDR text_offset;
{
/* We will read the unwind entries into temporary memory, then
fill in the actual unwind table. */
if (size > 0)
{
unsigned long tmp;
unsigned i;
char *buf = alloca (size);
bfd_get_section_contents (objfile->obfd, section, buf, 0, size);
/* Now internalize the information being careful to handle host/target
endian issues. */
for (i = 0; i < entries; i++)
{
table[i].region_start = bfd_get_32 (objfile->obfd,
(bfd_byte *)buf);
table[i].region_start += text_offset;
buf += 4;
table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
table[i].region_end += text_offset;
buf += 4;
tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
buf += 4;
table[i].Cannot_unwind = (tmp >> 31) & 0x1;
table[i].Millicode = (tmp >> 30) & 0x1;
table[i].Millicode_save_sr0 = (tmp >> 29) & 0x1;
table[i].Region_description = (tmp >> 27) & 0x3;
table[i].reserved1 = (tmp >> 26) & 0x1;
table[i].Entry_SR = (tmp >> 25) & 0x1;
table[i].Entry_FR = (tmp >> 21) & 0xf;
table[i].Entry_GR = (tmp >> 16) & 0x1f;
table[i].Args_stored = (tmp >> 15) & 0x1;
table[i].Variable_Frame = (tmp >> 14) & 0x1;
table[i].Separate_Package_Body = (tmp >> 13) & 0x1;
table[i].Frame_Extension_Millicode = (tmp >> 12 ) & 0x1;
table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1;
table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1;
table[i].Ada_Region = (tmp >> 9) & 0x1;
table[i].reserved2 = (tmp >> 5) & 0xf;
table[i].Save_SP = (tmp >> 4) & 0x1;
table[i].Save_RP = (tmp >> 3) & 0x1;
table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1;
table[i].extn_ptr_defined = (tmp >> 1) & 0x1;
table[i].Cleanup_defined = tmp & 0x1;
tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
buf += 4;
table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1;
table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1;
table[i].Large_frame = (tmp >> 29) & 0x1;
table[i].reserved4 = (tmp >> 27) & 0x3;
table[i].Total_frame_size = tmp & 0x7ffffff;
}
}
}
/* Read in the backtrace information stored in the `$UNWIND_START$' section of
the object file. This info is used mainly by find_unwind_entry() to find
out the stack frame size and frame pointer used by procedures. We put
everything on the psymbol obstack in the objfile so that it automatically
gets freed when the objfile is destroyed. */
static void
read_unwind_info (objfile)
struct objfile *objfile;
{
asection *unwind_sec, *elf_unwind_sec, *stub_unwind_sec;
unsigned unwind_size, elf_unwind_size, stub_unwind_size, total_size;
unsigned index, unwind_entries, elf_unwind_entries;
unsigned stub_entries, total_entries;
CORE_ADDR text_offset;
struct obj_unwind_info *ui;
text_offset = ANOFFSET (objfile->section_offsets, 0);
ui = obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct obj_unwind_info));
ui->table = NULL;
ui->cache = NULL;
ui->last = -1;
/* Get hooks to all unwind sections. Note there is no linker-stub unwind
section in ELF at the moment. */
unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_START$");
elf_unwind_sec = bfd_get_section_by_name (objfile->obfd, ".PARISC.unwind");
stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$");
/* Get sizes and unwind counts for all sections. */
if (unwind_sec)
{
unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
}
else
{
unwind_size = 0;
unwind_entries = 0;
}
if (elf_unwind_sec)
{
elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec);
elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE;
}
else
{
elf_unwind_size = 0;
elf_unwind_entries = 0;
}
if (stub_unwind_sec)
{
stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec);
stub_entries = stub_unwind_size / STUB_UNWIND_ENTRY_SIZE;
}
else
{
stub_unwind_size = 0;
stub_entries = 0;
}
/* Compute total number of unwind entries and their total size. */
total_entries = unwind_entries + elf_unwind_entries + stub_entries;
total_size = total_entries * sizeof (struct unwind_table_entry);
/* Allocate memory for the unwind table. */
ui->table = obstack_alloc (&objfile->psymbol_obstack, total_size);
ui->last = total_entries - 1;
/* Internalize the standard unwind entries. */
index = 0;
internalize_unwinds (objfile, &ui->table[index], unwind_sec,
unwind_entries, unwind_size, text_offset);
index += unwind_entries;
internalize_unwinds (objfile, &ui->table[index], elf_unwind_sec,
elf_unwind_entries, elf_unwind_size, text_offset);
index += elf_unwind_entries;
/* Now internalize the stub unwind entries. */
if (stub_unwind_size > 0)
{
unsigned int i;
char *buf = alloca (stub_unwind_size);
/* Read in the stub unwind entries. */
bfd_get_section_contents (objfile->obfd, stub_unwind_sec, buf,
0, stub_unwind_size);
/* Now convert them into regular unwind entries. */
for (i = 0; i < stub_entries; i++, index++)
{
/* Clear out the next unwind entry. */
memset (&ui->table[index], 0, sizeof (struct unwind_table_entry));
/* Convert offset & size into region_start and region_end.
Stuff away the stub type into "reserved" fields. */
ui->table[index].region_start = bfd_get_32 (objfile->obfd,
(bfd_byte *) buf);
ui->table[index].region_start += text_offset;
buf += 4;
ui->table[index].stub_type = bfd_get_8 (objfile->obfd,
(bfd_byte *) buf);
buf += 2;
ui->table[index].region_end
= ui->table[index].region_start + 4 *
(bfd_get_16 (objfile->obfd, (bfd_byte *) buf) - 1);
buf += 2;
}
}
/* Unwind table needs to be kept sorted. */
qsort (ui->table, total_entries, sizeof (struct unwind_table_entry),
compare_unwind_entries);
/* Keep a pointer to the unwind information. */
objfile->obj_private = (PTR) ui;
}
#endif /* NeXT */
#ifdef NeXT
/* is instruction any of the branch instructions (conditional, non-conditional, etc).
* nullified is 1 if the instruction in the delay slot is nullified.
*/
static int
isBranchInsn(insn, nullified)
unsigned insn;
int *nullified;
{
unsigned op = insn>>26;
if ((op>=0x20 && op<=0x23) || (op>=0x28 && op<=0x2b) ||
(op>=0x30 && op<=0x33) || (op>=0x38 && op<=0x3a)) {
*nullified = (insn & 2)>>1;
return 1;
}
return 0;
}
#endif /* NeXT */
static int use_unwind = 0;
/* Lookup the unwind (stack backtrace) info for the given PC. We search all
of the objfiles seeking the unwind table entry for this PC. Each objfile
contains a sorted list of struct unwind_table_entry. Since we do a binary
search of the unwind tables, we depend upon them to be sorted. */
static struct unwind_table_entry *
find_unwind_entry(pc)
CORE_ADDR pc;
{
int first, middle, last;
struct objfile *objfile;
ALL_OBJFILES (objfile)
{
struct obj_unwind_info *ui;
ui = OBJ_UNWIND_INFO (objfile);
if (!ui)
continue;
/* First, check the cache */
if (ui->cache
&& pc >= ui->cache->region_start
&& pc <= ui->cache->region_end)
return ui->cache;
/* Not in the cache, do a binary search */
first = 0;
last = ui->last;
while (first <= last)
{
middle = (first + last) / 2;
if (pc >= ui->table[middle].region_start
&& pc <= ui->table[middle].region_end)
{
ui->cache = &ui->table[middle];
return &ui->table[middle];
}
if (pc < ui->table[middle].region_start)
last = middle - 1;
else
first = middle + 1;
}
} /* ALL_OBJFILES() */
return NULL;
}
#ifndef NeXT
/* Return the adjustment necessary to make for addresses on the stack
as presented by hpread.c.
This is necessary because of the stack direction on the PA and the
bizarre way in which someone (?) decided they wanted to handle
frame pointerless code in GDB. */
int
hpread_adjust_stack_address (func_addr)
CORE_ADDR func_addr;
{
struct unwind_table_entry *u;
u = find_unwind_entry (func_addr);
if (!u)
return 0;
else
return u->Total_frame_size << 3;
}
/* Called to determine if PC is in an interrupt handler of some
kind. */
static int
pc_in_interrupt_handler (pc)
CORE_ADDR pc;
{
struct unwind_table_entry *u;
struct minimal_symbol *msym_us;
u = find_unwind_entry (pc);
if (!u)
return 0;
/* Oh joys. HPUX sets the interrupt bit for _sigreturn even though
its frame isn't a pure interrupt frame. Deal with this. */
msym_us = lookup_minimal_symbol_by_pc (pc);
return u->HP_UX_interrupt_marker && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us));
}
/* Called when no unwind descriptor was found for PC. Returns 1 if it
appears that PC is in a linker stub. */
static int
pc_in_linker_stub (pc)
CORE_ADDR pc;
{
int found_magic_instruction = 0;
int i;
char buf[4];
/* If unable to read memory, assume pc is not in a linker stub. */
if (target_read_memory (pc, buf, 4) != 0)
return 0;
/* We are looking for something like
; $$dyncall jams RP into this special spot in the frame (RP')
; before calling the "call stub"
ldw -18(sp),rp
ldsid (rp),r1 ; Get space associated with RP into r1
mtsp r1,sp ; Move it into space register 0
be,n 0(sr0),rp) ; back to your regularly scheduled program
*/
/* Maximum known linker stub size is 4 instructions. Search forward
from the given PC, then backward. */
for (i = 0; i < 4; i++)
{
/* If we hit something with an unwind, stop searching this direction. */
if (find_unwind_entry (pc + i * 4) != 0)
break;
/* Check for ldsid (rp),r1 which is the magic instruction for a
return from a cross-space function call. */
if (read_memory_integer (pc + i * 4, 4) == 0x004010a1)
{
found_magic_instruction = 1;
break;
}
/* Add code to handle long call/branch and argument relocation stubs
here. */
}
if (found_magic_instruction != 0)
return 1;
/* Now look backward. */
for (i = 0; i < 4; i++)
{
/* If we hit something with an unwind, stop searching this direction. */
if (find_unwind_entry (pc - i * 4) != 0)
break;
/* Check for ldsid (rp),r1 which is the magic instruction for a
return from a cross-space function call. */
if (read_memory_integer (pc - i * 4, 4) == 0x004010a1)
{
found_magic_instruction = 1;
break;
}
/* Add code to handle long call/branch and argument relocation stubs
here. */
}
return found_magic_instruction;
}
#endif /* NeXT */
static int
find_return_regnum(pc)
CORE_ADDR pc;
{
#ifndef NeXT
struct unwind_table_entry *u;
u = find_unwind_entry (pc);
if (!u)
return RP_REGNUM;
if (u->Millicode)
return 31;
return RP_REGNUM;
#else
/* We don't have unwind tables, so assume its a millicode call
* if the symbol's name starts with "$$"
* Although unlikely that anyone else has function names starting
* with '$$' (since that's not a valid C symbol name) it is possible,
* in which case single-stepping over them will cause problems.
* If we really cared, we could fix this in a couple of ways. We
* could make this routine compare the symbol name to all the known
* millicode routine names, or we could examine the code to look for
* the return instruction.
* I don't think it's worth it.
*/
struct minimal_symbol *min;
CORE_ADDR new_pc;
if ((new_pc = SKIP_TRAMPOLINE_CODE(pc)))
pc = new_pc;
min = lookup_minimal_symbol_by_pc(pc);
if (min &&
SYMBOL_NAME(min) &&
SYMBOL_NAME(min)[0]=='$' &&
SYMBOL_NAME(min)[1]=='$')
return MRP_REGNUM;
else return RP_REGNUM;
#endif /* NeXT */
}
#ifndef NeXT
/* Return size of frame, or -1 if we should use a frame pointer. */
int
find_proc_framesize (pc)
CORE_ADDR pc;
{
struct unwind_table_entry *u;
struct minimal_symbol *msym_us;
u = find_unwind_entry (pc);
if (!u)
{
if (pc_in_linker_stub (pc))
/* Linker stubs have a zero size frame. */
return 0;
else
return -1;
}
msym_us = lookup_minimal_symbol_by_pc (pc);
/* If Save_SP is set, and we're not in an interrupt or signal caller,
then we have a frame pointer. Use it. */
if (u->Save_SP && !pc_in_interrupt_handler (pc)
&& !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us)))
return -1;
return u->Total_frame_size << 3;
}
/* Return offset from sp at which rp is saved, or 0 if not saved. */
static int rp_saved PARAMS ((CORE_ADDR));
static int
rp_saved (pc)
CORE_ADDR pc;
{
struct unwind_table_entry *u;
u = find_unwind_entry (pc);
if (!u)
{
if (pc_in_linker_stub (pc))
/* This is the so-called RP'. */
return -24;
else
return 0;
}
if (u->Save_RP)
return -20;
else if (u->stub_type != 0)
{
switch (u->stub_type)
{
case EXPORT:
case IMPORT:
return -24;
case PARAMETER_RELOCATION:
return -8;
default:
return 0;
}
}
else
return 0;
}
int
frameless_function_invocation (frame)
struct frame_info *frame;
{
struct unwind_table_entry *u;
u = find_unwind_entry (frame->pc);
if (u == 0)
return 0;
return (u->Total_frame_size == 0 && u->stub_type == 0);
}
#endif /* NeXT */
CORE_ADDR
saved_pc_after_call (frame)
struct frame_info *frame;
{
int ret_regnum;
ret_regnum = find_return_regnum (get_frame_pc (frame));
return read_register (ret_regnum) & ~0x3;
}
CORE_ADDR
frame_saved_pc (frame)
struct frame_info *frame;
{
CORE_ADDR pc = get_frame_pc (frame);
#ifndef NeXT
struct unwind_table_entry *u;
/* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
at the base of the frame in an interrupt handler. Registers within
are saved in the exact same order as GDB numbers registers. How
convienent. */
if (pc_in_interrupt_handler (pc))
return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3;
/* Deal with signal handler caller frames too. */
if (frame->signal_handler_caller)
{
CORE_ADDR rp;
FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp);
return rp & ~0x3;
}
if (frameless_function_invocation (frame))
{
int ret_regnum;
ret_regnum = find_return_regnum (pc);
/* If the next frame is an interrupt frame or a signal
handler caller, then we need to look in the saved
register area to get the return pointer (the values
in the registers may not correspond to anything useful). */
if (frame->next
&& (frame->next->signal_handler_caller
|| pc_in_interrupt_handler (frame->next->pc)))
{
struct frame_saved_regs saved_regs;
get_frame_saved_regs (frame->next, &saved_regs);
if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
{
pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
/* Syscalls are really two frames. The syscall stub itself
with a return pointer in %rp and the kernel call with
a return pointer in %r31. We return the %rp variant
if %r31 is the same as frame->pc. */
if (pc == frame->pc)
pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
}
else
pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
}
else
pc = read_register (ret_regnum) & ~0x3;
}
else
{
int rp_offset;
restart:
rp_offset = rp_saved (pc);
/* Similar to code in frameless function case. If the next
frame is a signal or interrupt handler, then dig the right
information out of the saved register info. */
if (rp_offset == 0
&& frame->next
&& (frame->next->signal_handler_caller
|| pc_in_interrupt_handler (frame->next->pc)))
{
struct frame_saved_regs saved_regs;
get_frame_saved_regs (frame->next, &saved_regs);
if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
{
pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
/* Syscalls are really two frames. The syscall stub itself
with a return pointer in %rp and the kernel call with
a return pointer in %r31. We return the %rp variant
if %r31 is the same as frame->pc. */
if (pc == frame->pc)
pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
}
else
pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
}
else if (rp_offset == 0)
pc = read_register (RP_REGNUM) & ~0x3;
else
pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
}
/* If PC is inside a linker stub, then dig out the address the stub
will return to. */
u = find_unwind_entry (pc);
if (u && u->stub_type != 0)
goto restart;
return pc;
#else
int ret_regnum = find_return_regnum (pc);
if (frame->regs[ret_regnum].isSaved == SavedInFrame)
return read_memory_integer (frame->frame +
frame->regs[ret_regnum].where,4) & ~0x3;
else
return read_register (ret_regnum) & ~0x3;
#endif /* NeXT */
}
#ifdef NeXT
/* Get the value of a callee-saved regsiter in the chosen frame.
* Walk down the chain. If the register has ever been saved,
* the value saved away is the correct value for this frame.
* Otherwise, the current value of the register is still valid.
*/
unsigned
get_frame_saved_register(frame, regnum)
struct frame_info *frame;
int regnum;
{
unsigned value;
while(frame = frame->next) {
if (frame->regs[regnum].isSaved == SavedInRegister)
regnum = frame->regs[regnum].where;
if (frame->regs[regnum].isSaved == SavedInFrame)
return read_memory_integer(frame->frame + frame->regs[regnum].where,4);
}
return read_register(regnum);
}
#endif /* NeXT */
/* We need to correct the PC and the FP for the outermost frame when we are
in a system call. */
void
init_extra_frame_info (fromleaf, frame)
int fromleaf;
struct frame_info *frame;
{
#ifndef NeXT
int flags;
int framesize;
if (frame->next && !fromleaf)
return;
/* If the next frame represents a frameless function invocation
then we have to do some adjustments that are normally done by
FRAME_CHAIN. (FRAME_CHAIN is not called in this case.) */
if (fromleaf)
{
/* Find the framesize of *this* frame without peeking at the PC
in the current frame structure (it isn't set yet). */
framesize = find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame)));
/* Now adjust our base frame accordingly. If we have a frame pointer
use it, else subtract the size of this frame from the current
frame. (we always want frame->frame to point at the lowest address
in the frame). */
if (framesize == -1)
frame->frame = read_register (FP_REGNUM);
else
frame->frame -= framesize;
return;
}
flags = read_register (FLAGS_REGNUM);
if (flags & 2) /* In system call? */
frame->pc = read_register (31) & ~0x3;
/* The outermost frame is always derived from PC-framesize
One might think frameless innermost frames should have
a frame->frame that is the same as the parent's frame->frame.
That is wrong; frame->frame in that case should be the *high*
address of the parent's frame. It's complicated as hell to
explain, but the parent *always* creates some stack space for
the child. So the child actually does have a frame of some
sorts, and its base is the high address in its parent's frame. */
framesize = find_proc_framesize(frame->pc);
if (framesize == -1)
frame->frame = read_register (FP_REGNUM);
else
frame->frame = read_register (SP_REGNUM) - framesize;
#else
/* cache register information in frame, and correct frame address */
int uses_fp;
int framesize;
CORE_ADDR func_start;
static void examine_prologue();
func_start = get_pc_function_start(frame->pc);
if (func_start) {
examine_prologue(func_start, frame->pc, NULL, NULL,
&framesize, frame->regs, &uses_fp);
if (uses_fp)
frame->frame = get_frame_saved_register(frame, FP_REGNUM);
else {
if (frame->next) frame->frame = frame->next->frame - framesize;
else frame->frame = read_register(SP_REGNUM) - framesize;
}
}
else {
/* No symbol information, so assume it's a simple function
with a frame pointer */
bzero(frame->regs, sizeof(frame->regs));
frame->regs[RP_REGNUM].isSaved = SavedInFrame;
frame->regs[RP_REGNUM].where = -20;
frame->regs[FP_REGNUM].isSaved = SavedInFrame;
frame->regs[FP_REGNUM].where = 0;
frame->frame = get_frame_saved_register(frame, FP_REGNUM);
}
#endif /* NeXT */
}
/* Given a GDB frame, determine the address of the calling function's frame.
This will be used to create a new GDB frame struct, and then
INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
This may involve searching through prologues for several functions
at boundaries where GCC calls HP C code, or where code which has
a frame pointer calls code without a frame pointer. */
CORE_ADDR
frame_chain (frame)
struct frame_info *frame;
{
#ifndef NeXT
int my_framesize, caller_framesize;
struct unwind_table_entry *u;
CORE_ADDR frame_base;
/* Handle HPUX, BSD, and OSF1 style interrupt frames first. These
are easy; at *sp we have a full save state strucutre which we can
pull the old stack pointer from. Also see frame_saved_pc for
code to dig a saved PC out of the save state structure. */
if (pc_in_interrupt_handler (frame->pc))
frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4);
else if (frame->signal_handler_caller)
{
FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base);
}
else
frame_base = frame->frame;
/* Get frame sizes for the current frame and the frame of the
caller. */
my_framesize = find_proc_framesize (frame->pc);
caller_framesize = find_proc_framesize (FRAME_SAVED_PC(frame));
/* If caller does not have a frame pointer, then its frame
can be found at current_frame - caller_framesize. */
if (caller_framesize != -1)
return frame_base - caller_framesize;
/* Both caller and callee have frame pointers and are GCC compiled
(SAVE_SP bit in unwind descriptor is on for both functions.
The previous frame pointer is found at the top of the current frame. */
if (caller_framesize == -1 && my_framesize == -1)
return read_memory_integer (frame_base, 4);
/* Caller has a frame pointer, but callee does not. This is a little
more difficult as GCC and HP C lay out locals and callee register save
areas very differently.
The previous frame pointer could be in a register, or in one of
several areas on the stack.
Walk from the current frame to the innermost frame examining
unwind descriptors to determine if %r3 ever gets saved into the
stack. If so return whatever value got saved into the stack.
If it was never saved in the stack, then the value in %r3 is still
valid, so use it.
We use information from unwind descriptors to determine if %r3
is saved into the stack (Entry_GR field has this information). */
while (frame)
{
u = find_unwind_entry (frame->pc);
if (!u)
{
/* We could find this information by examining prologues. I don't
think anyone has actually written any tools (not even "strip")
which leave them out of an executable, so maybe this is a moot
point. */
warning ("Unable to find unwind for PC 0x%x -- Help!", frame->pc);
return 0;
}
/* Entry_GR specifies the number of callee-saved general registers
saved in the stack. It starts at %r3, so %r3 would be 1. */
if (u->Entry_GR >= 1 || u->Save_SP
|| frame->signal_handler_caller
|| pc_in_interrupt_handler (frame->pc))
break;
else
frame = frame->next;
}
if (frame)
{
/* We may have walked down the chain into a function with a frame
pointer. */
if (u->Save_SP
&& !frame->signal_handler_caller
&& !pc_in_interrupt_handler (frame->pc))
return read_memory_integer (frame->frame, 4);
/* %r3 was saved somewhere in the stack. Dig it out. */
else
{
struct frame_saved_regs saved_regs;
get_frame_saved_regs (frame, &saved_regs);
return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
}
}
else
{
/* The value in %r3 was never saved into the stack (thus %r3 still
holds the value of the previous frame pointer). */
return read_register (FP_REGNUM);
}
#else
if (FRAME_SAVED_PC(frame) == 0)
return 0;
/* We defer the actual adjustments to INIT_EXTRA_FRAME_INFO,
* when all the necessary information has been calculated.
* This value is ignored (as long as its non-zero)
*/
return 1;
#endif /* NeXT */
}
/* To see if a frame chain is valid, see if the caller looks like it
was compiled with gcc. */
int
frame_chain_valid (chain, thisframe)
CORE_ADDR chain;
struct frame_info *thisframe;
{
struct minimal_symbol *msym;
if (!chain)
return 0;
if (use_unwind)
{
struct unwind_table_entry *u;
u = find_unwind_entry (thisframe->pc);
if (u && (u->Save_SP || u->Total_frame_size))
return 1;
else
return 0;
}
else
{
msym = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe));
if (msym
&& (strcmp (SYMBOL_NAME (msym), "_start") == 0
#ifdef NeXT
|| strcmp (SYMBOL_NAME (msym), "start") == 0
#endif /* NeXT */
)
)
return 0;
else
return 1;
}
}
/*
* These functions deal with saving and restoring register state
* around a function call in the inferior. They keep the stack
* double-word aligned; eventually, on an hp700, the stack will have
* to be aligned to a 64-byte boundary.
*/
void
push_dummy_frame ()
{
register CORE_ADDR sp;
register int regnum;
int int_buffer;
double freg_buffer;
/* Space for "arguments"; the RP goes in here. */
sp = read_register (SP_REGNUM) + 48;
int_buffer = read_register (RP_REGNUM) | 0x3;
write_memory (sp - 20, (char *)&int_buffer, 4);
int_buffer = read_register (FP_REGNUM);
write_memory (sp, (char *)&int_buffer, 4);
write_register (FP_REGNUM, sp);
#ifndef NeXT /* We save state in gdb, so no need to save it here */
sp += 8;
for (regnum = 1; regnum < 32; regnum++)
if (regnum != RP_REGNUM && regnum != FP_REGNUM)
sp = push_word (sp, read_register (regnum));
sp += 4;
for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++)
{
read_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8);
sp = push_bytes (sp, (char *)&freg_buffer, 8);
}
sp = push_word (sp, read_register (IPSW_REGNUM));
sp = push_word (sp, read_register (SAR_REGNUM));
sp = push_word (sp, read_register (PCOQ_HEAD_REGNUM));
sp = push_word (sp, read_register (PCSQ_HEAD_REGNUM));
sp = push_word (sp, read_register (PCOQ_TAIL_REGNUM));
sp = push_word (sp, read_register (PCSQ_TAIL_REGNUM));
#else
/* make sure stack is aligned to 64 byte boundary */
sp += 16;
#endif /* NeXT */
write_register (SP_REGNUM, sp);
}
void
find_dummy_frame_regs (frame, frame_saved_regs)
struct frame_info *frame;
struct frame_saved_regs *frame_saved_regs;
{
CORE_ADDR fp = frame->frame;
int i;
frame_saved_regs->regs[RP_REGNUM] = fp - 20 & ~0x3;
frame_saved_regs->regs[FP_REGNUM] = fp;
frame_saved_regs->regs[1] = fp + 8;
for (fp += 12, i = 3; i < 32; i++)
{
if (i != FP_REGNUM)
{
frame_saved_regs->regs[i] = fp;
fp += 4;
}
}
fp += 4;
for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
frame_saved_regs->regs[i] = fp;
frame_saved_regs->regs[IPSW_REGNUM] = fp;
frame_saved_regs->regs[SAR_REGNUM] = fp + 4;
frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 8;
frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 12;
frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 16;
frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 20;
}
void
hppa_pop_frame ()
{
register struct frame_info *frame = get_current_frame ();
register CORE_ADDR fp, npc, target_pc;
register int regnum;
struct frame_saved_regs fsr;
double freg_buffer;
fp = FRAME_FP (frame);
get_frame_saved_regs (frame, &fsr);
if (fsr.regs[IPSW_REGNUM]) /* Restoring a call dummy frame */
restore_pc_queue (&fsr);
for (regnum = 31; regnum > 0; regnum--)
if (fsr.regs[regnum])
write_register (regnum, read_memory_integer (fsr.regs[regnum], 4));
for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM ; regnum--)
if (fsr.regs[regnum])
{
#ifndef NeXT
read_memory (fsr.regs[regnum], (char *)&freg_buffer, 8);
#else
target_read_memory (fsr.regs[regnum], (char *)&freg_buffer, 8);
#endif /* NeXT */
write_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8);
}
if (fsr.regs[IPSW_REGNUM])
write_register (IPSW_REGNUM,
read_memory_integer (fsr.regs[IPSW_REGNUM], 4));
if (fsr.regs[SAR_REGNUM])
write_register (SAR_REGNUM,
read_memory_integer (fsr.regs[SAR_REGNUM], 4));
/* If the PC was explicitly saved, then just restore it. */
if (fsr.regs[PCOQ_TAIL_REGNUM])
write_register (PCOQ_TAIL_REGNUM,
read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4));
/* Else use the value in %rp to set the new PC. */
else
target_write_pc (read_register (RP_REGNUM), 0);
write_register (FP_REGNUM, read_memory_integer (fp, 4));
if (fsr.regs[IPSW_REGNUM]) /* call dummy */
write_register (SP_REGNUM, fp - 48);
else
write_register (SP_REGNUM, fp);
flush_cached_frames ();
set_current_frame (create_new_frame (read_register (FP_REGNUM),
read_pc ()));
}
/*
* After returning to a dummy on the stack, restore the instruction
* queue space registers. */
static int
restore_pc_queue (fsr)
struct frame_saved_regs *fsr;
{
CORE_ADDR pc = read_pc ();
CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], 4);
struct target_waitstatus w;
int insn_count;
/* Advance past break instruction in the call dummy. */
write_register (PCOQ_HEAD_REGNUM, pc + 4);
write_register (PCOQ_TAIL_REGNUM, pc + 8);
/*
* HPUX doesn't let us set the space registers or the space
* registers of the PC queue through ptrace. Boo, hiss.
* Conveniently, the call dummy has this sequence of instructions
* after the break:
* mtsp r21, sr0
* ble,n 0(sr0, r22)
*
* So, load up the registers and single step until we are in the
* right place.
*/
write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], 4));
write_register (22, new_pc);
for (insn_count = 0; insn_count < 3; insn_count++)
{
/* FIXME: What if the inferior gets a signal right now? Want to
merge this into wait_for_inferior (as a special kind of
watchpoint? By setting a breakpoint at the end? Is there
any other choice? Is there *any* way to do this stuff with
ptrace() or some equivalent?). */
resume (1, 0);
target_wait (inferior_pid, &w);
if (w.kind == TARGET_WAITKIND_SIGNALLED)
{
stop_signal = w.value.sig;
terminal_ours_for_output ();
printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
target_signal_to_name (stop_signal),
target_signal_to_string (stop_signal));
gdb_flush (gdb_stdout);
return 0;
}
}
target_terminal_ours ();
target_fetch_registers (-1);
return 1;
}
CORE_ADDR
hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
value_ptr *args;
CORE_ADDR sp;
int struct_return;
CORE_ADDR struct_addr;
{
/* array of arguments' offsets */
int *offset = (int *)alloca(nargs * sizeof (int));
int cum = 0;
int i, alignment;
for (i = 0; i < nargs; i++)
{
/* Coerce chars to int & float to double if necessary */
args[i] = value_arg_coerce (args[i]);
cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
/* value must go at proper alignment. Assume alignment is a
power of two.*/
alignment = hppa_alignof (VALUE_TYPE (args[i]));
if (cum % alignment)
cum = (cum + alignment) & -alignment;
offset[i] = -cum;
}
#ifndef NeXT
sp += max ((cum + 7) & -8, 16);
#else
sp += max (cum, 16);
#endif /* NeXT */
for (i = 0; i < nargs; i++)
write_memory (sp + offset[i], VALUE_CONTENTS (args[i]),
TYPE_LENGTH (VALUE_TYPE (args[i])));
if (struct_return)
write_register (28, struct_addr);
#ifndef NeXT
return sp + 32;
#else
return sp;
#endif /* NeXT */
}
#ifdef NeXT
/* uses code similar to above to calcualte total amount of space args
* will take up on the stack
*/
unsigned hppa_calc_argsize (nargs, args)
int nargs;
value_ptr *args;
{
int cum = 0;
int i, alignment;
for (i = 0; i < nargs; i++)
{
args[i] = value_arg_coerce (args[i]);
cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
alignment = hppa_alignof (VALUE_TYPE (args[i]));
if (cum % alignment)
cum = (cum + alignment) & -alignment;
}
return max (cum, 16);
}
#endif /* NeXT */
/*
* Insert the specified number of args and function address
* into a call sequence of the above form stored at DUMMYNAME.
*
* On the hppa we need to call the stack dummy through $$dyncall.
* Therefore our version of FIX_CALL_DUMMY takes an extra argument,
* real_pc, which is the location where gdb should start up the
* inferior to do the function call.
*/
#ifndef NeXT /* NEXTSTEP doesn't need to go through $$dyncall */
CORE_ADDR
hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
char *dummy;
CORE_ADDR pc;
CORE_ADDR fun;
int nargs;
value_ptr *args;
struct type *type;
int gcc_p;
{
CORE_ADDR dyncall_addr, sr4export_addr;
struct minimal_symbol *msymbol;
int flags = read_register (FLAGS_REGNUM);
struct unwind_table_entry *u;
msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
if (msymbol == NULL)
error ("Can't find an address for $$dyncall trampoline");
dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
/* FUN could be a procedure label, in which case we have to get
its real address and the value of its GOT/DP. */
if (fun & 0x2)
{
/* Get the GOT/DP value for the target function. It's
at *(fun+4). Note the call dummy is *NOT* allowed to
trash %r19 before calling the target function. */
write_register (19, read_memory_integer ((fun & ~0x3) + 4, 4));
/* Now get the real address for the function we are calling, it's
at *fun. */
fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, 4);
}
else
{
#ifndef GDB_TARGET_IS_PA_ELF
/* FUN could be either an export stub, or the real address of a
function in a shared library. We must call an import stub
rather than the export stub or real function for lazy binding
to work correctly. */
if (som_solib_get_got_by_pc (fun))
{
struct objfile *objfile;
struct minimal_symbol *funsymbol, *stub_symbol;
CORE_ADDR newfun = 0;
funsymbol = lookup_minimal_symbol_by_pc (fun);
if (!funsymbol)
error ("Unable to find minimal symbol for target fucntion.\n");
/* Search all the object files for an import symbol with the
right name. */
ALL_OBJFILES (objfile)
{
stub_symbol = lookup_minimal_symbol (SYMBOL_NAME (funsymbol),
NULL, objfile);
/* Found a symbol with the right name. */
if (stub_symbol)
{
struct unwind_table_entry *u;
/* It must be a shared library trampoline. */
if (SYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
continue;
/* It must also be an import stub. */
u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
if (!u || u->stub_type != IMPORT)
continue;
/* OK. Looks like the correct import stub. */
newfun = SYMBOL_VALUE (stub_symbol);
fun = newfun;
}
}
if (newfun == 0)
write_register (19, som_solib_get_got_by_pc (fun));
}
#endif
}
/* If we are calling an import stub (eg calling into a dynamic library)
then have sr4export call the magic __d_plt_call routine which is linked
in from end.o. (You can't use _sr4export to call the import stub as
the value in sp-24 will get fried and you end up returning to the
wrong location. You can't call the import stub directly as the code
to bind the PLT entry to a function can't return to a stack address.) */
u = find_unwind_entry (fun);
if (u && u->stub_type == IMPORT)
{
CORE_ADDR new_fun;
msymbol = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
if (msymbol == NULL)
msymbol = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL);
if (msymbol == NULL)
error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline");
/* This is where sr4export will jump to. */
new_fun = SYMBOL_VALUE_ADDRESS (msymbol);
if (strcmp (SYMBOL_NAME (msymbol), "__d_plt_call"))
write_register (22, fun);
else
{
/* We have to store the address of the stub in __shlib_funcptr. */
msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
(struct objfile *)NULL);
if (msymbol == NULL)
error ("Can't find an address for __shlib_funcptr");
target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&fun, 4);
}
fun = new_fun;
}
/* We still need sr4export's address too. */
msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
if (msymbol == NULL)
error ("Can't find an address for _sr4export trampoline");
sr4export_addr = SYMBOL_VALUE_ADDRESS (msymbol);
store_unsigned_integer
(&dummy[9*REGISTER_SIZE],
REGISTER_SIZE,
deposit_21 (fun >> 11,
extract_unsigned_integer (&dummy[9*REGISTER_SIZE],
REGISTER_SIZE)));
store_unsigned_integer
(&dummy[10*REGISTER_SIZE],
REGISTER_SIZE,
deposit_14 (fun & MASK_11,
extract_unsigned_integer (&dummy[10*REGISTER_SIZE],
REGISTER_SIZE)));
store_unsigned_integer
(&dummy[12*REGISTER_SIZE],
REGISTER_SIZE,
deposit_21 (sr4export_addr >> 11,
extract_unsigned_integer (&dummy[12*REGISTER_SIZE],
REGISTER_SIZE)));
store_unsigned_integer
(&dummy[13*REGISTER_SIZE],
REGISTER_SIZE,
deposit_14 (sr4export_addr & MASK_11,
extract_unsigned_integer (&dummy[13*REGISTER_SIZE],
REGISTER_SIZE)));
write_register (22, pc);
/* If we are in a syscall, then we should call the stack dummy
directly. $$dyncall is not needed as the kernel sets up the
space id registers properly based on the value in %r31. In
fact calling $$dyncall will not work because the value in %r22
will be clobbered on the syscall exit path.
Similarly if the current PC is in a shared library. Note however,
this scheme won't work if the shared library isn't mapped into
the same space as the stack. */
if (flags & 2)
return pc;
#ifndef GDB_TARGET_IS_PA_ELF
else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid)))
return pc;
#endif
else
return dyncall_addr;
}
#endif /* NeXT */
/* Get the PC from %r31 if currently in a syscall. Also mask out privilege
bits. */
/* ARGSUSED */
CORE_ADDR
target_read_pc (pid)
int pid;
{
int flags = read_register (FLAGS_REGNUM);
if (flags & 2) {
return read_register (31) & ~0x3;
}
return read_register (PC_REGNUM) & ~0x3;
}
/* Write out the PC. If currently in a syscall, then also write the new
PC value into %r31. */
/* ARGSUSED */
void
target_write_pc (v, pid)
CORE_ADDR v;
int pid;
{
int flags = read_register (FLAGS_REGNUM);
/* If in a syscall, then set %r31. Also make sure to get the
privilege bits set correctly. */
if (flags & 2)
write_register (31, (long) (v | 0x3));
write_register (PC_REGNUM, (long) v);
write_register (NPC_REGNUM, (long) v + 4);
}
/* return the alignment of a type in bytes. Structures have the maximum
alignment required by their fields. */
static int
hppa_alignof (arg)
struct type *arg;
{
int max_align, align, i;
switch (TYPE_CODE (arg))
{
case TYPE_CODE_PTR:
case TYPE_CODE_INT:
case TYPE_CODE_FLT:
return TYPE_LENGTH (arg);
case TYPE_CODE_ARRAY:
return hppa_alignof (TYPE_FIELD_TYPE (arg, 0));
case TYPE_CODE_STRUCT:
case TYPE_CODE_UNION:
max_align = 2;
for (i = 0; i < TYPE_NFIELDS (arg); i++)
{
/* Bit fields have no real alignment. */
if (!TYPE_FIELD_BITPOS (arg, i))
{
align = hppa_alignof (TYPE_FIELD_TYPE (arg, i));
max_align = max (max_align, align);
}
}
return max_align;
default:
return 4;
}
}
/* Print the register regnum, or all registers if regnum is -1 */
void
pa_do_registers_info (regnum, fpregs)
int regnum;
int fpregs;
{
char raw_regs [REGISTER_BYTES];
int i;
for (i = 0; i < NUM_REGS; i++)
read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
if (regnum == -1)
pa_print_registers (raw_regs, regnum, fpregs);
else if (regnum < FP0_REGNUM)
printf_unfiltered ("%s %x\n", reg_names[regnum], *(long *)(raw_regs +
REGISTER_BYTE (regnum)));
else
pa_print_fp_reg (regnum);
}
static void
pa_print_registers (raw_regs, regnum, fpregs)
char *raw_regs;
int regnum;
int fpregs;
{
int i;
for (i = 0; i < 18; i++)
printf_unfiltered ("%8.8s: %8x %8.8s: %8x %8.8s: %8x %8.8s: %8x\n",
reg_names[i],
*(int *)(raw_regs + REGISTER_BYTE (i)),
reg_names[i + 18],
*(int *)(raw_regs + REGISTER_BYTE (i + 18)),
reg_names[i + 36],
*(int *)(raw_regs + REGISTER_BYTE (i + 36)),
reg_names[i + 54],
*(int *)(raw_regs + REGISTER_BYTE (i + 54)));
if (fpregs)
#ifdef NeXT
for (i = FP4_REGNUM; i < NUM_REGS; i++)
pa_print_fp_reg (i);
#else
for (i = 72; i < NUM_REGS; i++)
pa_print_fp_reg (i);
#endif /* NeXT */
}
static void
pa_print_fp_reg (i)
int i;
{
unsigned char raw_buffer[MAX_REGISTER_RAW_SIZE];
unsigned char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
/* Get the data in raw format. */
read_relative_register_raw_bytes (i, raw_buffer);
/* Convert raw data to virtual format if necessary. */
#ifdef REGISTER_CONVERTIBLE /* which it isn't for NeXT */
if (REGISTER_CONVERTIBLE(i))
REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i),
raw_buffer, virtual_buffer);
else
#endif
memcpy (virtual_buffer, raw_buffer,
REGISTER_VIRTUAL_SIZE (i));
fputs_filtered (reg_names[i], gdb_stdout);
print_spaces_filtered (15 - strlen (reg_names[i]), gdb_stdout);
val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, gdb_stdout, 0,
1, 0, Val_pretty_default);
printf_filtered ("\n");
}
/* Function calls that pass into a new compilation unit must pass through a
small piece of code that does long format (`external' in HPPA parlance)
jumps. We figure out where the trampoline is going to end up, and return
the PC of the final destination. If we aren't in a trampoline, we just
return NULL.
For computed calls, we just extract the new PC from r22.
By the way, a peculiar hitherto-undocumented feature of this function
is that if the "name" parameter is NULL, it need only return true or
false (ie. are we looking at a trampoline stub). MVS -- NeXT */
CORE_ADDR
skip_trampoline_code (pc, name)
CORE_ADDR pc;
char *name;
{
#ifndef NeXT /* We don't use $$dyncall */
long orig_pc = pc;
long prev_inst, curr_inst, loc;
static CORE_ADDR dyncall = 0;
static CORE_ADDR sr4export = 0;
struct minimal_symbol *msym;
struct unwind_table_entry *u;
/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
new exec file */
if (!dyncall)
{
msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
if (msym)
dyncall = SYMBOL_VALUE_ADDRESS (msym);
else
dyncall = -1;
}
if (!sr4export)
{
msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
if (msym)
sr4export = SYMBOL_VALUE_ADDRESS (msym);
else
sr4export = -1;
}
/* Addresses passed to dyncall may *NOT* be the actual address
of the function. So we may have to do something special. */
if (pc == dyncall)
{
pc = (CORE_ADDR) read_register (22);
/* If bit 30 (counting from the left) is on, then pc is the address of
the PLT entry for this function, not the address of the function
itself. Bit 31 has meaning too, but only for MPE. */
if (pc & 0x2)
pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
}
else if (pc == sr4export)
pc = (CORE_ADDR) (read_register (22));
/* Get the unwind descriptor corresponding to PC, return zero
if no unwind was found. */
u = find_unwind_entry (pc);
if (!u)
return 0;
/* If this isn't a linker stub, then return now. */
if (u->stub_type == 0)
return orig_pc == pc ? 0 : pc & ~0x3;
/* It's a stub. Search for a branch and figure out where it goes.
Note we have to handle multi insn branch sequences like ldil;ble.
Most (all?) other branches can be determined by examining the contents
of certain registers and the stack. */
loc = pc;
curr_inst = 0;
prev_inst = 0;
while (1)
{
/* Make sure we haven't walked outside the range of this stub. */
if (u != find_unwind_entry (loc))
{
warning ("Unable to find branch in linker stub");
return orig_pc == pc ? 0 : pc & ~0x3;
}
prev_inst = curr_inst;
curr_inst = read_memory_integer (loc, 4);
/* Does it look like a branch external using %r1? Then it's the
branch from the stub to the actual function. */
if ((curr_inst & 0xffe0e000) == 0xe0202000)
{
/* Yup. See if the previous instruction loaded
a value into %r1. If so compute and return the jump address. */
if ((prev_inst & 0xffe00000) == 0x20200000)
return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3;
else
{
warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
return orig_pc == pc ? 0 : pc & ~0x3;
}
}
/* Does it look like a be 0(sr0,%r21)? That's the branch from an
import stub to an export stub.
It is impossible to determine the target of the branch via
simple examination of instructions and/or data (consider
that the address in the plabel may be the address of the
bind-on-reference routine in the dynamic loader).
So we have try an alternative approach.
Get the name of the symbol at our current location; it should
be a stub symbol with the same name as the symbol in the
shared library.
Then lookup a minimal symbol with the same name; we should
get the minimal symbol for the target routine in the shared
library as those take precedence of import/export stubs. */
if (curr_inst == 0xe2a00000)
{
struct minimal_symbol *stubsym, *libsym;
stubsym = lookup_minimal_symbol_by_pc (loc);
if (stubsym == NULL)
{
warning ("Unable to find symbol for 0x%x", loc);
return orig_pc == pc ? 0 : pc & ~0x3;
}
libsym = lookup_minimal_symbol (SYMBOL_NAME (stubsym), NULL, NULL);
if (libsym == NULL)
{
warning ("Unable to find library symbol for %s\n",
SYMBOL_NAME (stubsym));
return orig_pc == pc ? 0 : pc & ~0x3;
}
return SYMBOL_VALUE (libsym);
}
/* Does it look like bl X,%rp or bl X,%r0? Another way to do a
branch from the stub to the actual function. */
else if ((curr_inst & 0xffe0e000) == 0xe8400000
|| (curr_inst & 0xffe0e000) == 0xe8000000)
return (loc + extract_17 (curr_inst) + 8) & ~0x3;
/* Does it look like bv (rp)? Note this depends on the
current stack pointer being the same as the stack
pointer in the stub itself! This is a branch on from the
stub back to the original caller. */
else if ((curr_inst & 0xffe0e000) == 0xe840c000)
{
/* Yup. See if the previous instruction loaded
rp from sp - 8. */
if (prev_inst == 0x4bc23ff1)
return (read_memory_integer
(read_register (SP_REGNUM) - 8, 4)) & ~0x3;
else
{
warning ("Unable to find restore of %%rp before bv (%%rp).");
return orig_pc == pc ? 0 : pc & ~0x3;
}
}
/* What about be,n 0(sr0,%rp)? It's just another way we return to
the original caller from the stub. Used in dynamic executables. */
else if (curr_inst == 0xe0400002)
{
/* The value we jump to is sitting in sp - 24. But that's
loaded several instructions before the be instruction.
I guess we could check for the previous instruction being
mtsp %r1,%sr0 if we want to do sanity checking. */
return (read_memory_integer
(read_register (SP_REGNUM) - 24, 4)) & ~0x3;
}
/* Haven't found the branch yet, but we're still in the stub.
Keep looking. */
loc += 4;
}
#else /* NeXT */
long inst0, inst1;
CORE_ADDR newpc = 0;
/* first test: static shlib jumptable */
inst0 = mread (pc, 4, 0);
if ((inst0 & 0xffe00000) == 0x20200000 && /* ldil xxx, r1 */
(inst1 = mread (pc+4, 4, 0xffe0e002)) &&
(inst1 == 0xe4202002 || /* ble,n yyy(sr4,r1) */
inst1 == 0xe0202002)) /* be,n yyy(sr4,r1) */
return name ? 1 : extract_21 (inst0) + extract_17 (inst1);
else
if (inst0 == 0x20200801 && /* ldil -40000000, r1 */
mread (pc+4, 4, 0xffe00002) == 0xe4200000) /* ble yyy(sr?,r1) */
if (!name)
{ /* I don't know why this code is so */
pc += 12; /* different -- I'm just carrying it */
target_write_pc(pc | 0x3, 0); /* along from some guy before me */
return pc;
}
else return 1;
/* second test: compiler-generated inter-module function call stub
(only generated in the presence of dynamic shlibs) */
if (mread (pc, 4, 0xffe00000) == 0xea600000 && /* bl $pc+8, r19 */
mread (pc+4, 4, 0) == 0x08000240 && /* nop */
mread (pc+8, 4, 0) == 0xd6601c1e && /* depi 0,31,2,r19 */
mread (pc+12, 4, 0xffe00000) == 0x2a600000 && /* addil L(xxx),r19 */
mread (pc+16, 4, 0xffffc000) == 0x34330000 && /* ldo R(xxx)(r1),r19 */
mread (pc+20, 4, 0) == 0xe2602002) /* be,n 0(sr4,r19) */
if (name)
return 1;
else
pc = newpc = name ? 1 : pc + extract_21 (mread (pc+12, 4, 0)) +
extract_14 (mread (pc+16, 4, 0)) + 8;
/* and fall thru to second test, copying any newpc into pc, because
the inter-module function call stub may lead to a shlib/dylib stub */
/* third test: dynamic shlib jumptable (1st entrypoint) */
if (mread (pc, 4, 0xffe00000) == 0x2a600000 && /* addil L(x),r19 */
mread (pc+4, 4, 0xffffc000) == 0x48330000 && /* ldw R(x)(sr0,r19),r19 */
mread (pc+8, 4, 0) == 0xe2602002) /* be,n 0(sr4,r19) */
if (name)
return 1;
else
pc = newpc = mread (pc + extract_21 (mread (pc, 4, 0)) +
extract_14 (mread (pc+4, 4, 0)), 4, 0);
/* and fall thru to fourth test, copying any newpc into pc,
because the dylib entry point jump could take us here. */
/* fourth test: dynamic shlib jumptable (as yet unresolved entry) */
if (mread (pc, 4, 0) == 0x2a600000 && /* addil L(x),r19 */
mread (pc+4, 4, 0xffffc000) == 0x34350000 && /* ldo R(x)(r1),r21 */
mread (pc+8, 4, 0xffe00000) == 0x2a600000 && /* addil L(x),r19 */
mread (pc+12, 4, 0xffffc000) == 0x48330000 && /* ldw R(x)(sr0,r19),r19 */
mread (pc+16, 4, 0) == 0xe2602002) /* be,n 0(sr4,r19) */
newpc = name ? 1 : (CORE_ADDR) get_symbol_stub_real_address (pc, NULL);
return newpc;
#endif /* NeXT */
}
#ifdef NeXT
/* Big hairball routine for figuring out what's going on in the prologue.
* Fills in some information that under hpux is available in the unwind
* tables.
* Interesting information includes where the prologue ends (used in
* skip_prologue), whether or not a frame pointer is set up,
* how much the stack gets bumped by if we don't use a frame pointer,
* and what callee saved registers are saved on the stack (and where).
*
* The offsets in saved_regs are relative to the current frame.
*
*/
static void
examine_prologue(pc, maxpc, code_start, prologue_end, stack_adjust,
saved_regs, has_fptr)
CORE_ADDR pc, maxpc; /* examine this range of code */
CORE_ADDR *code_start; /* first non-prologue instruction */
CORE_ADDR *prologue_end;/* last prologue instruction */
int *stack_adjust; /* amount stack gets bumped by in this prologue */
hppa_saved_regs
saved_regs; /* which regs are saved by this prologue and where */
int *has_fptr; /* does this routine use a frame pointer or not? */
{
int done = 0;
unsigned insn, opcode;
int current_frame_reg = SP_REGNUM; /* On entry, sp points to our frame */
unsigned sp_bumped = 0;
unsigned real_code_start = 0; /* Points to first non-prolog insn */
unsigned last_prologue_insn = 0; /* Last thing we think is a prolog insn */
int need_ldo_r1 = 0; /* for frames > 8k */
int nullifies_next_insn;
bzero (saved_regs, sizeof (hppa_saved_regs));
/* Major sanity check until we get a fix for backtracing past main() */
if ((maxpc == 0) || (maxpc > 256 + pc) || (maxpc < pc)) {
maxpc = pc + 256;
}
/* loop through the code, looking for interesting prologue instructions. */
while(!done && (pc < maxpc)) {
insn = read_memory_integer(pc,4);
/* The prologue (or the procedure itself) must be over by the time the
* first branch instruction is hit. However, make sure to examine the
* instruction in the delay slot as well.
*/
if (isBranchInsn(insn,&nullifies_next_insn)) {
if (!real_code_start) real_code_start = pc;
if (nullifies_next_insn)
break; /* insn in delay slot doesn't get executed, so we're done */
else {
/* examine the delay slot insn, but quit after that */
pc += 4;
insn = read_memory_integer(pc,4);
done = 1;
}
}
opcode = GET_FIELD(insn,0,5);
if (((opcode == 0x1A) && ((GET_FIELD(insn,6,10) == current_frame_reg) ||
(GET_FIELD(insn,6,10) == SP_REGNUM))) ||
((opcode == 0x1B) && (GET_FIELD(insn,6,10) == SP_REGNUM))) {
/* stw or stwm of reg into frame */
unsigned reg = GET_FIELD(insn,11,15);
unsigned offset = extract_14(insn);
if (opcode == 0x1B) { /* stwm, so we are bumping the stack */
sp_bumped = offset;
offset = 0;
}
if (reg>0) {
saved_regs[reg].isSaved = SavedInFrame;
saved_regs[reg].where = offset;
if ((opcode == 0x1A) && (GET_FIELD(insn,6,10) == SP_REGNUM))
saved_regs[reg].where += sp_bumped;
last_prologue_insn = pc;
}
}
else if ((opcode == 2) &&
(GET_FIELD(insn,20,26) == 0x12) &&
(GET_FIELD(insn,6,10) == 0)) { /* copy reg1, reg2 */
unsigned srcreg = GET_FIELD(insn,11,15);
unsigned destreg = GET_FIELD(insn,27,31);
if (saved_regs[srcreg].isSaved == NotSaved) {
saved_regs[srcreg].isSaved = SavedInRegister;
saved_regs[srcreg].where = destreg;
}
if (srcreg == FP_REGNUM) {
last_prologue_insn = pc;
}
else if (srcreg == current_frame_reg) {
current_frame_reg = destreg; /* copied frame to fp */
last_prologue_insn = pc;
}
else if (!real_code_start) real_code_start = pc;
}
else if ((opcode == 0x0D) &&
(GET_FIELD(insn,6,10)==SP_REGNUM) &&
(GET_FIELD(insn,11,15)==SP_REGNUM)) { /* ldo x(sp),sp */
sp_bumped = extract_14(insn); /* -- bumping the stack */
last_prologue_insn = pc;
}
else if ((opcode == 0x0A) &&
(GET_FIELD(insn,6,10)==SP_REGNUM)) { /* addil x(sp) */
/*for a frame size > 8K, addil followed by a `ldo x(r1),r30'
is used to bump the stack */
sp_bumped = extract_21(insn);
need_ldo_r1 = 1; /* indicate that we need the other half of this */
last_prologue_insn = pc;
}
else if (need_ldo_r1 && (opcode == 0x0D)
&& (GET_FIELD(insn,6,10)==1)
&& (GET_FIELD(insn,11,15)==SP_REGNUM)) {
sp_bumped += extract_14(insn);
last_prologue_insn = pc;
need_ldo_r1 = 0;
}
else if (!real_code_start) real_code_start = pc;
pc+=4;
}
if (stack_adjust) *stack_adjust = sp_bumped;
if (code_start) *code_start = real_code_start;
if (prologue_end) *prologue_end = last_prologue_insn;
if (has_fptr) *has_fptr = (current_frame_reg == FP_REGNUM) ? 1:0;
}
/* Advance PC across any function entry prologue instructions
to reach some "real" code. */
/* skip (stw rp, -20(0,sp)); copy 4,1; copy sp, 4; stwm 1,framesize(sp)
for gcc, or (stw rp, -20(0,sp); stwm 1, framesize(sp) for hcc */
CORE_ADDR
skip_prologue(pc)
CORE_ADDR pc;
{
CORE_ADDR real_code, last_pinsn;
hppa_saved_regs regs;
examine_prologue(pc, 0, &real_code, &last_pinsn, NULL, regs, NULL);
return real_code;
}
frame_find_saved_regs(frame_info,frame_saved_regs)
struct frame_info *frame_info;
struct frame_saved_regs *frame_saved_regs;
{
CORE_ADDR func_start = get_pc_function_start(frame_info->pc);
hppa_saved_regs regs;
int i;
examine_prologue(func_start,frame_info->pc, NULL,NULL,NULL, regs, NULL);
bzero (frame_saved_regs, sizeof *frame_saved_regs);
for(i=0; i<NUM_REGS; ++i)
if (regs[i].isSaved == SavedInFrame)
frame_saved_regs->regs[i] = frame_info->frame + regs[i].where;
/* sp is special. We need the old value of sp, not where it is saved */
frame_saved_regs->regs[SP_REGNUM] = frame_info->frame;
}
#else
/* For the given instruction (INST), return any adjustment it makes
to the stack pointer or zero for no adjustment.
This only handles instructions commonly found in prologues. */
static int
prologue_inst_adjust_sp (inst)
unsigned long inst;
{
/* This must persist across calls. */
static int save_high21;
/* The most common way to perform a stack adjustment ldo X(sp),sp */
if ((inst & 0xffffc000) == 0x37de0000)
return extract_14 (inst);
/* stwm X,D(sp) */
if ((inst & 0xffe00000) == 0x6fc00000)
return extract_14 (inst);
/* addil high21,%r1; ldo low11,(%r1),%r30)
save high bits in save_high21 for later use. */
if ((inst & 0xffe00000) == 0x28200000)
{
save_high21 = extract_21 (inst);
return 0;
}
if ((inst & 0xffff0000) == 0x343e0000)
return save_high21 + extract_14 (inst);
/* fstws as used by the HP compilers. */
if ((inst & 0xffffffe0) == 0x2fd01220)
return extract_5_load (inst);
/* No adjustment. */
return 0;
}
/* Return nonzero if INST is a branch of some kind, else return zero. */
static int
is_branch (inst)
unsigned long inst;
{
switch (inst >> 26)
{
case 0x20:
case 0x21:
case 0x22:
case 0x23:
case 0x28:
case 0x29:
case 0x2a:
case 0x2b:
case 0x30:
case 0x31:
case 0x32:
case 0x33:
case 0x38:
case 0x39:
case 0x3a:
return 1;
default:
return 0;
}
}
/* Return the register number for a GR which is saved by INST or
zero it INST does not save a GR. */
static int
inst_saves_gr (inst)
unsigned long inst;
{
/* Does it look like a stw? */
if ((inst >> 26) == 0x1a)
return extract_5R_store (inst);
/* Does it look like a stwm? GCC & HPC may use this in prologues. */
if ((inst >> 26) == 0x1b)
return extract_5R_store (inst);
/* Does it look like sth or stb? HPC versions 9.0 and later use these
too. */
if ((inst >> 26) == 0x19 || (inst >> 26) == 0x18)
return extract_5R_store (inst);
return 0;
}
/* Return the register number for a FR which is saved by INST or
zero it INST does not save a FR.
Note we only care about full 64bit register stores (that's the only
kind of stores the prologue will use).
FIXME: What about argument stores with the HP compiler in ANSI mode? */
static int
inst_saves_fr (inst)
unsigned long inst;
{
if ((inst & 0xfc00dfc0) == 0x2c001200)
return extract_5r_store (inst);
return 0;
}
/* Advance PC across any function entry prologue instructions
to reach some "real" code.
Use information in the unwind table to determine what exactly should
be in the prologue. */
CORE_ADDR
skip_prologue (pc)
CORE_ADDR pc;
{
char buf[4];
unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
unsigned long args_stored, status, i;
struct unwind_table_entry *u;
u = find_unwind_entry (pc);
if (!u)
return pc;
/* If we are not at the beginning of a function, then return now. */
if ((pc & ~0x3) != u->region_start)
return pc;
/* This is how much of a frame adjustment we need to account for. */
stack_remaining = u->Total_frame_size << 3;
/* Magic register saves we want to know about. */
save_rp = u->Save_RP;
save_sp = u->Save_SP;
/* An indication that args may be stored into the stack. Unfortunately
the HPUX compilers tend to set this in cases where no args were
stored too!. */
args_stored = u->Args_stored;
/* Turn the Entry_GR field into a bitmask. */
save_gr = 0;
for (i = 3; i < u->Entry_GR + 3; i++)
{
/* Frame pointer gets saved into a special location. */
if (u->Save_SP && i == FP_REGNUM)
continue;
save_gr |= (1 << i);
}
/* Turn the Entry_FR field into a bitmask too. */
save_fr = 0;
for (i = 12; i < u->Entry_FR + 12; i++)
save_fr |= (1 << i);
/* Loop until we find everything of interest or hit a branch.
For unoptimized GCC code and for any HP CC code this will never ever
examine any user instructions.
For optimzied GCC code we're faced with problems. GCC will schedule
its prologue and make prologue instructions available for delay slot
filling. The end result is user code gets mixed in with the prologue
and a prologue instruction may be in the delay slot of the first branch
or call.
Some unexpected things are expected with debugging optimized code, so
we allow this routine to walk past user instructions in optimized
GCC code. */
while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0
|| args_stored)
{
unsigned int reg_num;
unsigned long old_stack_remaining, old_save_gr, old_save_fr;
unsigned long old_save_rp, old_save_sp, next_inst;
/* Save copies of all the triggers so we can compare them later
(only for HPC). */
old_save_gr = save_gr;
old_save_fr = save_fr;
old_save_rp = save_rp;
old_save_sp = save_sp;
old_stack_remaining = stack_remaining;
status = target_read_memory (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
/* Yow! */
if (status != 0)
return pc;
/* Note the interesting effects of this instruction. */
stack_remaining -= prologue_inst_adjust_sp (inst);
/* There is only one instruction used for saving RP into the stack. */
if (inst == 0x6bc23fd9)
save_rp = 0;
/* This is the only way we save SP into the stack. At this time
the HP compilers never bother to save SP into the stack. */
if ((inst & 0xffffc000) == 0x6fc10000)
save_sp = 0;
/* Account for general and floating-point register saves. */
reg_num = inst_saves_gr (inst);
save_gr &= ~(1 << reg_num);
/* Ugh. Also account for argument stores into the stack.
Unfortunately args_stored only tells us that some arguments
where stored into the stack. Not how many or what kind!
This is a kludge as on the HP compiler sets this bit and it
never does prologue scheduling. So once we see one, skip past
all of them. We have similar code for the fp arg stores below.
FIXME. Can still die if we have a mix of GR and FR argument
stores! */
if (reg_num >= 23 && reg_num <= 26)
{
while (reg_num >= 23 && reg_num <= 26)
{
pc += 4;
status = target_read_memory (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
reg_num = inst_saves_gr (inst);
}
args_stored = 0;
continue;
}
reg_num = inst_saves_fr (inst);
save_fr &= ~(1 << reg_num);
status = target_read_memory (pc + 4, buf, 4);
next_inst = extract_unsigned_integer (buf, 4);
/* Yow! */
if (status != 0)
return pc;
/* We've got to be read to handle the ldo before the fp register
save. */
if ((inst & 0xfc000000) == 0x34000000
&& inst_saves_fr (next_inst) >= 4
&& inst_saves_fr (next_inst) <= 7)
{
/* So we drop into the code below in a reasonable state. */
reg_num = inst_saves_fr (next_inst);
pc -= 4;
}
/* Ugh. Also account for argument stores into the stack.
This is a kludge as on the HP compiler sets this bit and it
never does prologue scheduling. So once we see one, skip past
all of them. */
if (reg_num >= 4 && reg_num <= 7)
{
while (reg_num >= 4 && reg_num <= 7)
{
pc += 8;
status = target_read_memory (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
if ((inst & 0xfc000000) != 0x34000000)
break;
status = target_read_memory (pc + 4, buf, 4);
next_inst = extract_unsigned_integer (buf, 4);
if (status != 0)
return pc;
reg_num = inst_saves_fr (next_inst);
}
args_stored = 0;
continue;
}
/* Quit if we hit any kind of branch. This can happen if a prologue
instruction is in the delay slot of the first call/branch. */
if (is_branch (inst))
break;
/* What a crock. The HP compilers set args_stored even if no
arguments were stored into the stack (boo hiss). This could
cause this code to then skip a bunch of user insns (up to the
first branch).
To combat this we try to identify when args_stored was bogusly
set and clear it. We only do this when args_stored is nonzero,
all other resources are accounted for, and nothing changed on
this pass. */
if (args_stored
&& ! (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
&& old_save_gr == save_gr && old_save_fr == save_fr
&& old_save_rp == save_rp && old_save_sp == save_sp
&& old_stack_remaining == stack_remaining)
break;
/* Bump the PC. */
pc += 4;
}
return pc;
}
#endif /* NeXT */
#ifndef NeXT
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special:
the address we return for it IS the sp for the next frame. */
void
hppa_frame_find_saved_regs (frame_info, frame_saved_regs)
struct frame_info *frame_info;
struct frame_saved_regs *frame_saved_regs;
{
CORE_ADDR pc;
struct unwind_table_entry *u;
unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
int status, i, reg;
char buf[4];
int fp_loc = -1;
/* Zero out everything. */
memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs));
/* Call dummy frames always look the same, so there's no need to
examine the dummy code to determine locations of saved registers;
instead, let find_dummy_frame_regs fill in the correct offsets
for the saved registers. */
if ((frame_info->pc >= frame_info->frame
&& frame_info->pc <= (frame_info->frame + CALL_DUMMY_LENGTH
+ 32 * 4 + (NUM_REGS - FP0_REGNUM) * 8
+ 6 * 4)))
find_dummy_frame_regs (frame_info, frame_saved_regs);
/* Interrupt handlers are special too. They lay out the register
state in the exact same order as the register numbers in GDB. */
if (pc_in_interrupt_handler (frame_info->pc))
{
for (i = 0; i < NUM_REGS; i++)
{
/* SP is a little special. */
if (i == SP_REGNUM)
frame_saved_regs->regs[SP_REGNUM]
= read_memory_integer (frame_info->frame + SP_REGNUM * 4, 4);
else
frame_saved_regs->regs[i] = frame_info->frame + i * 4;
}
return;
}
/* Handle signal handler callers. */
if (frame_info->signal_handler_caller)
{
FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs);
return;
}
/* Get the starting address of the function referred to by the PC
saved in frame. */
pc = get_pc_function_start (frame_info->pc);
/* Yow! */
u = find_unwind_entry (pc);
if (!u)
return;
/* This is how much of a frame adjustment we need to account for. */
stack_remaining = u->Total_frame_size << 3;
/* Magic register saves we want to know about. */
save_rp = u->Save_RP;
save_sp = u->Save_SP;
/* Turn the Entry_GR field into a bitmask. */
save_gr = 0;
for (i = 3; i < u->Entry_GR + 3; i++)
{
/* Frame pointer gets saved into a special location. */
if (u->Save_SP && i == FP_REGNUM)
continue;
save_gr |= (1 << i);
}
/* Turn the Entry_FR field into a bitmask too. */
save_fr = 0;
for (i = 12; i < u->Entry_FR + 12; i++)
save_fr |= (1 << i);
/* The frame always represents the value of %sp at entry to the
current function (and is thus equivalent to the "saved" stack
pointer. */
frame_saved_regs->regs[SP_REGNUM] = frame_info->frame;
/* Loop until we find everything of interest or hit a branch.
For unoptimized GCC code and for any HP CC code this will never ever
examine any user instructions.
For optimzied GCC code we're faced with problems. GCC will schedule
its prologue and make prologue instructions available for delay slot
filling. The end result is user code gets mixed in with the prologue
and a prologue instruction may be in the delay slot of the first branch
or call.
Some unexpected things are expected with debugging optimized code, so
we allow this routine to walk past user instructions in optimized
GCC code. */
while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
{
status = target_read_memory (pc, buf, 4);
inst = extract_unsigned_integer (buf, 4);
/* Yow! */
if (status != 0)
return;
/* Note the interesting effects of this instruction. */
stack_remaining -= prologue_inst_adjust_sp (inst);
/* There is only one instruction used for saving RP into the stack. */
if (inst == 0x6bc23fd9)
{
save_rp = 0;
frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20;
}
/* Just note that we found the save of SP into the stack. The
value for frame_saved_regs was computed above. */
if ((inst & 0xffffc000) == 0x6fc10000)
save_sp = 0;
/* Account for general and floating-point register saves. */
reg = inst_saves_gr (inst);
if (reg >= 3 && reg <= 18
&& (!u->Save_SP || reg != FP_REGNUM))
{
save_gr &= ~(1 << reg);
/* stwm with a positive displacement is a *post modify*. */
if ((inst >> 26) == 0x1b
&& extract_14 (inst) >= 0)
frame_saved_regs->regs[reg] = frame_info->frame;
else
{
/* Handle code with and without frame pointers. */
if (u->Save_SP)
frame_saved_regs->regs[reg]
= frame_info->frame + extract_14 (inst);
else
frame_saved_regs->regs[reg]
= frame_info->frame + (u->Total_frame_size << 3)
+ extract_14 (inst);
}
}
/* GCC handles callee saved FP regs a little differently.
It emits an instruction to put the value of the start of
the FP store area into %r1. It then uses fstds,ma with
a basereg of %r1 for the stores.
HP CC emits them at the current stack pointer modifying
the stack pointer as it stores each register. */
/* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
if ((inst & 0xffffc000) == 0x34610000
|| (inst & 0xffffc000) == 0x37c10000)
fp_loc = extract_14 (inst);
reg = inst_saves_fr (inst);
if (reg >= 12 && reg <= 21)
{
/* Note +4 braindamage below is necessary because the FP status
registers are internally 8 registers rather than the expected
4 registers. */
save_fr &= ~(1 << reg);
if (fp_loc == -1)
{
/* 1st HP CC FP register store. After this instruction
we've set enough state that the GCC and HPCC code are
both handled in the same manner. */
frame_saved_regs->regs[reg + FP4_REGNUM + 4] = frame_info->frame;
fp_loc = 8;
}
else
{
frame_saved_regs->regs[reg + FP0_REGNUM + 4]
= frame_info->frame + fp_loc;
fp_loc += 8;
}
}
/* Quit if we hit any kind of branch. This can happen if a prologue
instruction is in the delay slot of the first call/branch. */
if (is_branch (inst))
break;
/* Bump the PC. */
pc += 4;
}
}
#ifdef MAINTENANCE_CMDS
static void
unwind_command (exp, from_tty)
char *exp;
int from_tty;
{
CORE_ADDR address;
union
{
int *foo;
struct unwind_table_entry *u;
} xxx;
/* If we have an expression, evaluate it and use it as the address. */
if (exp != 0 && *exp != 0)
address = parse_and_eval_address (exp);
else
return;
xxx.u = find_unwind_entry (address);
if (!xxx.u)
{
printf_unfiltered ("Can't find unwind table entry for PC 0x%x\n", address);
return;
}
printf_unfiltered ("%08x\n%08X\n%08X\n%08X\n", xxx.foo[0], xxx.foo[1], xxx.foo[2],
xxx.foo[3]);
}
#endif /* MAINTENANCE_CMDS */
#endif /* NeXT */
void
_initialize_hppa_tdep ()
{
#ifdef NeXT
extern int catch_alignment_traps;
add_show_from_set(add_set_cmd("alignment-traps", class_obscure, var_boolean,
(char *)&catch_alignment_traps,
"Set catching of unaligned data references",
&setlist)
, &showlist);
#else /* We don't have unwind tables */
#ifdef MAINTENANCE_CMDS
add_cmd ("unwind", class_maintenance, unwind_command,
"Print unwind table entry at given address.",
&maintenanceprintlist);
#endif /* MAINTENANCE_CMDS */
#endif /* NeXT */
tm_print_insn = print_insn_hppa;
}
These are the contents of the former NiCE NeXT User Group NeXTSTEP/OpenStep software archive, currently hosted by Netfuture.ch.